Article
Licensed
Unlicensed
Requires Authentication
Design and analysis of a multi-sensor deformation detection system
-
Anna Szostak-Chrzanowski
Published/Copyright:
November 25, 2008
Abstract
Development of new technologies for monitoring structural and ground deformations puts new demands on the design and analysis of the multi-sensor systems. Design and analysis of monitoring schemes require a good understanding of the physical process that leads to deformation. Deterministic modelling of the load-deformation relationship provides information on the magnitude and location of expected critical deformations as well as delineates the deformation zone. By combining results of deterministic modelling with geometrical analysis, one can find the deformation mechanism and explain the cause of deformation in case of irregular behaviour of the investigated object. The concept is illustrated by four practical examples.
Received: 2008-06-23
Accepted: 2008-07-17
Published Online: 2008-11-25
Published in Print: 2008-December
© de Gruyter 2008
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- On-the-job detection and correction of systematic cyclic distance measurement errors of terrestrial laser scanners
- Design and analysis of a multi-sensor deformation detection system
- A model for predicting GPS-GDOP and its probability using LiDAR data and ultra rapid product
- The switch from relative to absolute phase centre variation model and its impact on coordinate estimates within local engineering networks
- Reference point determination with a new mathematical model at the 20 m VLBI radio telescope in Wettzell
- Morphological updating on the basis of integrated DTMs: study on the Albano and Nemi craters
- 9th Conference on Optical 3-D Measurement Techniques
Articles in the same Issue
- On-the-job detection and correction of systematic cyclic distance measurement errors of terrestrial laser scanners
- Design and analysis of a multi-sensor deformation detection system
- A model for predicting GPS-GDOP and its probability using LiDAR data and ultra rapid product
- The switch from relative to absolute phase centre variation model and its impact on coordinate estimates within local engineering networks
- Reference point determination with a new mathematical model at the 20 m VLBI radio telescope in Wettzell
- Morphological updating on the basis of integrated DTMs: study on the Albano and Nemi craters
- 9th Conference on Optical 3-D Measurement Techniques
