Skip to main content
Article
Licensed
Unlicensed Requires Authentication

Acoustic Emission Generated from Tool Flank Contact in Diamond Turning

  • and
Published/Copyright: December 1, 1999
Become an author with De Gruyter Brill
Author Information
Journal for Manufacturing Science and Production
From the journal Journal for Manufacturing Science and Production Volume 2 Issue 4

Published Online: 1999-12

©2011 by Walter de Gruyter GmbH & Co.

Articles in the same Issue

  1. Table of Contents
  2. Relational CAPP (Computer Aided Process Planning) System
  3. FEM-Simulation of Multistage Wire Drawing with Backward Force Considering the Material Damage
  4. Prediction of the Tool Life Function Based on the Tool-Work Thermocouple Temperature During Milling
  5. Nc-Postprocessing And Nc-Simulation For Five-Axis Milling Operations With Automatic Collision Avoidance
  6. Results of the International Survey on the Optimisation of Availability in Complex Assembly Systems
  7. Acoustic Emission Generated from Tool Flank Contact in Diamond Turning
https://doi.org/10.1515/IJMSP.1999.2.4.227

Articles in the same Issue

  1. Table of Contents
  2. Relational CAPP (Computer Aided Process Planning) System
  3. FEM-Simulation of Multistage Wire Drawing with Backward Force Considering the Material Damage
  4. Prediction of the Tool Life Function Based on the Tool-Work Thermocouple Temperature During Milling
  5. Nc-Postprocessing And Nc-Simulation For Five-Axis Milling Operations With Automatic Collision Avoidance
  6. Results of the International Survey on the Optimisation of Availability in Complex Assembly Systems
  7. Acoustic Emission Generated from Tool Flank Contact in Diamond Turning
Downloaded on 29.4.2026 from https://www.degruyterbrill.com/document/doi/10.1515/IJMSP.1999.2.4.227/html?lang=en
Scroll to top button