Home FTIR spectroscopy in combination with principal component analysis or cluster analysis as a tool to distinguish beech (Fagus sylvatica L.) trees grown at different sites
Article
Licensed
Unlicensed Requires Authentication

FTIR spectroscopy in combination with principal component analysis or cluster analysis as a tool to distinguish beech (Fagus sylvatica L.) trees grown at different sites

  • Rumana Rana , Günter Müller , Annette Naumann and Andrea Polle
Published/Copyright: July 22, 2008
Become an author with De Gruyter Brill
Holzforschung
From the journal Volume 62 Issue 5

Abstract

FTIR spectroscopy was used to distinguish between beech (Fagus sylvatica L.) trees grown at five different sites; one in middle Germany close to Göttingen (forest district Reinhausen), three located in the southwest (two in Rhineland-Palatinate: forest districts Saarburg and Hochwald, and one in Luxembourg), and one in North-Rhine Westfalia. Detailed investigation of the spectra in the fingerprint region (1800–600 cm-1) revealed 16 distinct peaks and shoulders, most of which were assignable to wavenumbers previously shown to represent wood compounds. Differences in peak heights and peak ratios indicated differences in wood composition of beech trees from different sites. To determine if the wood of individual trees could be distinguished, principal component analysis (PCA) and cluster analysis were performed using FTIR spectra as input data. With both PCA and cluster analysis, trees from four of the five different sites were separated. It was not possible to distinguish between trees from Saarburg and Hochwald, where similar edaphic and climatic conditions exist, while wood spectra from trees from all other areas clearly segregated. Wood collected at different positions in the stem (bottom, crown, center and outer year rings) of trees grown at the same site was not distinguishable. Therefore, FTIR spectral analysis in combination with multivariate statistical methods can be used to distinguish wood of trees from different growth habitats. Extension of this method to other species may be of great interest for wood certification, as it may be possible to distinguish wood, of a given species, originating from different regions.


Corresponding author. Büsgen-Institut, Abtlg. Forstbotanik und Baumphysiologie, Georg-August-Universität Göttingen, Büsgenweg 2, 37077 Göttingen, Germany Phone: +49-551-393482 Fax: +49-551-3922705

Received: 2008-1-4
Accepted: 2008-5-30
Published Online: 2008-07-22
Published Online: 2008-07-22
Published in Print: 2008-09-01

©2008 by Walter de Gruyter Berlin New York

Articles in the same Issue

  1. Original Papers
  2. Studies on the dehydrogenative polymerizations (DHPs) of monolignol β-glycosides: Part 4. Horseradish peroxidase-catalyzed copolymerization of isoconiferin and isosyringin
  3. Studies on the dehydrogenative polymerization of monolignol β-glycosides: Part 5. UV spectroscopic monitoring of horseradish peroxidase-catalyzed polymerization of monolignol glycosides
  4. Monolignol dehydrogenative polymerization in vitro in the presence of dioxane and a methylated β-β′ dimer model compound
  5. Structural characterization of milled wood lignins from different eucalypt species
  6. FTIR spectroscopy in combination with principal component analysis or cluster analysis as a tool to distinguish beech (Fagus sylvatica L.) trees grown at different sites
  7. Hydrothermal dissolution of mixed southern hardwoods
  8. Characterisation of fines from unbleached kraft pulps and their impact on sheet properties
  9. Effects of refining steam pressure on the properties of loblolly pine (Pinus taeda L.) fibers
  10. Elastic deformation mechanisms of softwoods in radial tension – Cell wall bending or stretching?
  11. Fiberboard bending properties as a function of density, thickness, resin, and moisture content
  12. Modification of Fagus sylvatica (L.) with 1,3-dimethylol-4,5-dihydroxyethylene urea (DMDHEU): Part 1. Estimation of heat adsorption by the isosteric method (Hailwood-Horrobin model) and by solution calorimetry
  13. Development of wooden block shear wall – Improvement of stiffness by utilizing elements of densified wood
  14. Significance of the heating rate on the physical properties of carbonized maple wood
  15. Exploring Scots pine fibre development mechanisms during TMP processing: Impact of cell wall ultrastructure (morphological and topochemical) on negative behaviour
  16. Pentachlorphenol migration from treated wood exposed to simulated rainfall
  17. Resistance of Trichoderma harzianum to the biocide tebuconazol – Proposed biodegradation pathways
  18. Short Notes
  19. On the variation of acid-labile aryl ether unit content in wood lignin
  20. Coumarins and secoiridoid glucosides from bark of Fraxinus rhynchophylla Hance
  21. Antifungal activities of heartwood extracts of Port-Orford cedar extractives
  22. Antifungal secoabietane dialdehyde and bisabolane-type terpenoids from the heartwood of Cryptomeria japonica D. Don
  23. Meetings
  24. Meetings
Downloaded on 26.10.2025 from https://www.degruyterbrill.com/document/doi/10.1515/HF.2008.104/html
Scroll to top button