Laser Ablation of Machined Wood Surfaces. 2. Effect on End-Grain Gluing of Pine (Pinus silvestris L.)
-
Micael Stehr
Summary
The effect on glue joint strength of removing the layer of cells on end-grain surfaces of wood damaged by machining—the mechanical weak boundary layer (MWBL)—is presented. The wood surfaces have been laser ablated using different types of lasers of different wavelengths. The goal has been to determine whether or not the strength of end-grain glue joints is influenced by the MWBL and to show how the laser wavelength affects the glue joint strength. All tests were carried out with a PVAc-glue with hardener, and two different glue pressures were used. The joints were tested by bending notched and fatigued specimens. The statistical evaluation of the results shows that one laser gave a significantly higher glue joint strength than the others.
One main conclusion is that the glue joint strength could have been improved with a stronger glue. An ESEM-analysis showed that fracture occurred primarily in the glueline and not in the boundary layer.
Copyright © 1999 by Walter de Gruyter GmbH & Co. KG
Articles in the same Issue
- Subject Index
- Author Index
- Species Index
- Contents
- Production of Polygalacturonase and Increase of Longitudinal Gas Permeability in Southern Pine by Brown-Rot and White-Rot Fungi
- Components of Steamed and Non-Steamed Japanese Larch (Larix leptolepis (Sieb. et Zucc.) Gord.) Heartwood Affecting the Feeding Behavior of the Subterranean Termite, Coptotermes formosanus Shiraki (Isoptera: Rhinotermitidae)
- Effect of Soluble Nutrient Content in Wood on its Susceptibility to Soft Rot and Bacterial Attack in Ground Test
- Carboxylic Acids of Moroccan Pinus Pinaster Bark Extract
- What Factors Control Dimerization of Coniferyl Alcohol?
- Atmospheric Acetic Acid Pulping of Rice Straw IV: Physico-Chemical Characterization of Acetic Acid Lignins from Rice Straw and Woods. Part 2. Chemical Structures
- Rapid Determination of the Lignin Content in Sitka Spruce (Picea sitchensis (Bong.) Carr.) Wood by Fourier Transform Infrared Spectrometry
- Lignin Analysis by Permanganate Oxidation. II. Lignins in Acidic Organosolv Pulps
- Lignin Depolymerization in Hydrogen-Donor Solvents
- Species Effects on Wood-Liquefaction in Polyhydric Alcohols
- NMR Analysis of Oxidative Alkaline Extraction Stage Lignins
- Reduction of Weathering Degradation of Wood Through Plasma-Polymer Coating
- VOC Extraction from Softwood Through Low-Headspace Heating
- Localization of Wood Improvement Compounds by Microautoradiography and ESEM
- Laser Ablation of Machined Wood Surfaces. 2. Effect on End-Grain Gluing of Pine (Pinus silvestris L.)
- Multi-Component Mixture Modeling for the Dielectric Properties of Rubber Wood at Microwave Frequencies
- Adsorption of Liquids and Swelling of Wood IV. Temperature Dependence on the Adsorption
- Prevention of Extractive Leaching by Chemical Treatments of Wood Surface
Articles in the same Issue
- Subject Index
- Author Index
- Species Index
- Contents
- Production of Polygalacturonase and Increase of Longitudinal Gas Permeability in Southern Pine by Brown-Rot and White-Rot Fungi
- Components of Steamed and Non-Steamed Japanese Larch (Larix leptolepis (Sieb. et Zucc.) Gord.) Heartwood Affecting the Feeding Behavior of the Subterranean Termite, Coptotermes formosanus Shiraki (Isoptera: Rhinotermitidae)
- Effect of Soluble Nutrient Content in Wood on its Susceptibility to Soft Rot and Bacterial Attack in Ground Test
- Carboxylic Acids of Moroccan Pinus Pinaster Bark Extract
- What Factors Control Dimerization of Coniferyl Alcohol?
- Atmospheric Acetic Acid Pulping of Rice Straw IV: Physico-Chemical Characterization of Acetic Acid Lignins from Rice Straw and Woods. Part 2. Chemical Structures
- Rapid Determination of the Lignin Content in Sitka Spruce (Picea sitchensis (Bong.) Carr.) Wood by Fourier Transform Infrared Spectrometry
- Lignin Analysis by Permanganate Oxidation. II. Lignins in Acidic Organosolv Pulps
- Lignin Depolymerization in Hydrogen-Donor Solvents
- Species Effects on Wood-Liquefaction in Polyhydric Alcohols
- NMR Analysis of Oxidative Alkaline Extraction Stage Lignins
- Reduction of Weathering Degradation of Wood Through Plasma-Polymer Coating
- VOC Extraction from Softwood Through Low-Headspace Heating
- Localization of Wood Improvement Compounds by Microautoradiography and ESEM
- Laser Ablation of Machined Wood Surfaces. 2. Effect on End-Grain Gluing of Pine (Pinus silvestris L.)
- Multi-Component Mixture Modeling for the Dielectric Properties of Rubber Wood at Microwave Frequencies
- Adsorption of Liquids and Swelling of Wood IV. Temperature Dependence on the Adsorption
- Prevention of Extractive Leaching by Chemical Treatments of Wood Surface
