Home Lignin-Polyphenol Interaction in Azobe (Lophira alata) Heartwood. A Study on Milled Wood Lignin (MWL) and Klason Residues
Article
Licensed
Unlicensed Requires Authentication

Lignin-Polyphenol Interaction in Azobe (Lophira alata) Heartwood. A Study on Milled Wood Lignin (MWL) and Klason Residues

  • Werner Lange and Oskar Faix
Published/Copyright: June 1, 2005
Become an author with De Gruyter Brill
Holzforschung
From the journal Volume 53 Issue 5

Summary

Findings about anomalous high Klason residues of azobe (Lophira alata) heartwood prompted a search for methods of determination of non lignin-type polyphenols in lignin preparations. A four step procedure was performed: (1) ethylation of milled wood lignins (MWLs) from azobe and beech heartwood, (2) permanganate oxidation, (3) methylation, and (4) GC analysis of the oxidation products. Besides the well known degradation products of hemipinic, iso-hemipinic, and meta-hemipinic acid type, methyl-3,4-diethoxy-benzoate (compound I) has also been detected among the oxidation products. The oxidation of beech MWL gave rise only to 0.4 mol % of I but azobe MWL yielded the remarkably high amount of 10.7 mol % of I. As lignins do not contain two adjacent aromatic hydroxyl groups, we concluded that I is of polyflavonoid origin. Hence the extraordinarily high Klason residues of azobe heartwood can be rationalized with large amounts of acid insoluble polyphenols which are an integral part of the azobe cell wall and which is also closely associated to MWLs. Ethylation followed by KMnO4 oxidation is an effective tool to detect polyflavonoids in lignins.

:
Published Online: 2005-06-01
Published in Print: 1999-09-10

Copyright © 1999 by Walter de Gruyter GmbH & Co. KG

Articles in the same Issue

  1. The Significance of Accelerated Laboratory Testing Methods Determining the Natural Durability of Wood
  2. The Thermomechanical Behaviour of Wood Subject to Fungal Decay
  3. Fixation of Chromium in Wood from Trivalent Chromium Salt Solutions
  4. Spatial Distribution of Metal Ions in Spruce Wood by Synchrotron Radiation Microbeam X-Ray Fluorescence Analysis
  5. Chemical Composition of Lipophilic Extractives from Eucalyptus globulus Labill. Wood
  6. Antifungal Compounds in the Ethyl Acetate Soluble Fraction of the Extractives of Taiwania (Taiwania cryptomerioides Hayata) Heartwood
  7. Efficacy of Pinosylvins against White-Rot and Brown-Rot Fungi
  8. Investigations into Laccase-Mediator Delignification of Kraft Pulps
  9. Cell-Wall-Associated Oxidases from the Lignifying Xylem of Angiosperms and Gymnosperms: Monolignol Oxidation
  10. Atmospheric Acetic Acid Pulping of Rice Straw IV: Physico-Chemical Characterization of Acetic Acid Lignins from Rice Straw and Woods. Part 1. Physical Characteristics
  11. Lignin-Polyphenol Interaction in Azobe (Lophira alata) Heartwood. A Study on Milled Wood Lignin (MWL) and Klason Residues
  12. Electrospray Ionization Mass Spectrometry as a Tool for Lignins Molecular Weight and Structural Characterisation
  13. Determination of Phenolic Hydroxyl Groups in Lignin by Combined Use of 1H NMR and UV Spectroscopy
  14. The Effective Diffusion Coefficient and Mass Transfer Coefficient of Nordic Softwoods as Calculated from Direct Drying Experiments
  15. Stress Relaxation of Sugi (Cryptomeria japonica D.Don) Wood in Radial Compression under High Temperature Steam
  16. Structural Performance of Fire-Retardant Treated Plywood: Effect of Elevated Temperature
  17. Sorption Behaviour and Dimensional Changes of Wood-Coating Composites
  18. Literature Reports
Downloaded on 19.9.2025 from https://www.degruyterbrill.com/document/doi/10.1515/HF.1999.085/html
Scroll to top button