12 Magnetized nanofluids flow in porous enclosures containing elliptical cylinder of varying aspect ratios
-
Belkacem Ould Said
Abstract
This research presents a numerical investigation of steady mixed convection in a two-dimensional vented porous enclosure incorporating an elliptical cylinder filled with a Cu/H2O nanoliquid. The flow dynamics of the nanoliquid are modeled using the Brinkman-Forchheimer approach. In this configuration, the upper and lower horizontal boundaries are maintained at hot (Th) and cold (Tc) temperatures, respectively, while the remaining walls are treated as adiabatic. The study systematically analyzes the influence of several dimensionless parameters: the Grashof number (Gr) spanning from 103 to 105, the Reynolds number (Re) ranging from 50 to 500, nanoparticle volume fractions between 0.1 and 0.6, the Hartman number (Ha) from 0 to 20, and various aspect ratios of the elliptical cylinder. The outcomes are illustrated through isotherm distributions, velocity streamlines, entropy generation rates, and the average Nusselt number. The variation of these parameters offers a pathway to effectively manipulate and enhance the heat transfer performance within the system, thereby providing valuable insights for engineering applications in thermal management.
Abstract
This research presents a numerical investigation of steady mixed convection in a two-dimensional vented porous enclosure incorporating an elliptical cylinder filled with a Cu/H2O nanoliquid. The flow dynamics of the nanoliquid are modeled using the Brinkman-Forchheimer approach. In this configuration, the upper and lower horizontal boundaries are maintained at hot (Th) and cold (Tc) temperatures, respectively, while the remaining walls are treated as adiabatic. The study systematically analyzes the influence of several dimensionless parameters: the Grashof number (Gr) spanning from 103 to 105, the Reynolds number (Re) ranging from 50 to 500, nanoparticle volume fractions between 0.1 and 0.6, the Hartman number (Ha) from 0 to 20, and various aspect ratios of the elliptical cylinder. The outcomes are illustrated through isotherm distributions, velocity streamlines, entropy generation rates, and the average Nusselt number. The variation of these parameters offers a pathway to effectively manipulate and enhance the heat transfer performance within the system, thereby providing valuable insights for engineering applications in thermal management.
Chapters in this book
- Frontmatter I
- Preface V
- Contents IX
- 1 Impact of Hall current and aligned magnetic field on magnetized hybrid flow of MgO‐Ag/H2O over a movable slender needle 1
- 2 Optimization of entropy in bioconvective and reactive micropolar nanofluid flow with Arrhenius kinetics 23
- 3 CFD heat transfer study of nano-enhanced phase change material 45
- 4 Magnetothermal and magnetorheological nanofluids: simulation techniques, biomedical engineering applications, and potential health risks 71
- 5 Nanorefrigerants in engineering: advances, challenges, and insights from experimental and CFD simulations and potential applications 109
- 6 Interaction of Lorentz force on Darcy- Forchheimer hybrid nanofluid flow over a stretching sheet in a porous medium 165
- 7 Impact of motile microorganisms on 3D flow of non-Newtonian thermofluid induced by exponentially stretching sheet: biomedicine and engineering applications 181
- 8 Lattice Boltzmann simulation of copperwater nanofluid 217
- 9 Stagnation point flow of MHD nanofluid over an exponentially stretching sheet with radiation 237
- 10 Entropy analysis of Al2O3/water nanofluid in viscous fluid flow with Joule heating and viscous dissipation over a permeable radiated stretching disk: a comparative study of nanoparticle shapes 261
- 11 Solar-powered magnetoelectrokinetic peristaltic transport of thermally radiative Jeffrey nanofluids in asymmetric porous media 289
- 12 Magnetized nanofluids flow in porous enclosures containing elliptical cylinder of varying aspect ratios 319
- 13 Dufour and Soret effects on nanofluid over an exponentially stretching sheet with chemical reaction 337
- 14 Heat transfer in dissipative water-based hybrid nanofluid under radiation phenomenon via OHAM 357
- 15 Heat and mass transfer analysis of Casson hybrid nanofluid flow over a stretching sheet with velocity slip and suction/injection 379
- Index 395
Chapters in this book
- Frontmatter I
- Preface V
- Contents IX
- 1 Impact of Hall current and aligned magnetic field on magnetized hybrid flow of MgO‐Ag/H2O over a movable slender needle 1
- 2 Optimization of entropy in bioconvective and reactive micropolar nanofluid flow with Arrhenius kinetics 23
- 3 CFD heat transfer study of nano-enhanced phase change material 45
- 4 Magnetothermal and magnetorheological nanofluids: simulation techniques, biomedical engineering applications, and potential health risks 71
- 5 Nanorefrigerants in engineering: advances, challenges, and insights from experimental and CFD simulations and potential applications 109
- 6 Interaction of Lorentz force on Darcy- Forchheimer hybrid nanofluid flow over a stretching sheet in a porous medium 165
- 7 Impact of motile microorganisms on 3D flow of non-Newtonian thermofluid induced by exponentially stretching sheet: biomedicine and engineering applications 181
- 8 Lattice Boltzmann simulation of copperwater nanofluid 217
- 9 Stagnation point flow of MHD nanofluid over an exponentially stretching sheet with radiation 237
- 10 Entropy analysis of Al2O3/water nanofluid in viscous fluid flow with Joule heating and viscous dissipation over a permeable radiated stretching disk: a comparative study of nanoparticle shapes 261
- 11 Solar-powered magnetoelectrokinetic peristaltic transport of thermally radiative Jeffrey nanofluids in asymmetric porous media 289
- 12 Magnetized nanofluids flow in porous enclosures containing elliptical cylinder of varying aspect ratios 319
- 13 Dufour and Soret effects on nanofluid over an exponentially stretching sheet with chemical reaction 337
- 14 Heat transfer in dissipative water-based hybrid nanofluid under radiation phenomenon via OHAM 357
- 15 Heat and mass transfer analysis of Casson hybrid nanofluid flow over a stretching sheet with velocity slip and suction/injection 379
- Index 395
