Zum Hauptinhalt springen
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Effect of hygrothermal aging and ply-stacking sequence on low-velocity impact properties of CFRP composite plates

  • Mustafa Biçer, born in 1981, received his BSc degree in 2005 at the Department of Industrial Design at Anadolu University, his MSc degree in 2023 Naval Architecture branch of the Graduate School of Natural and Applied Sciences, Dokuz Eylul University, Izmir, Türkiye. He worked on Mega Yacht, Prototype, and Industrial Design projects in various companies in Istanbul, Türkiye for 10 years. He is currently a lecturer at the Industrial Design Department at Yasar University, Izmir, Türkiye.

     ORCID logo     und

    Dr. Erkin Altunsaray, born in 1977, received his BSc degree in 2000 at the Department of Naval Architecture and Marine Engineering, Yildiz Technical University, İstanbul, Türkiye, his MSc degree in 2005 at the Naval Architecture branch of the Graduate School of Natural and Applied Sciences, Dokuz Eylul University, Izmir, Türkiye, and his PhD degree in 2011 at the Naval Architecture and Marine Engineering branch of the Graduate School of Natural and Applied Sciences, Yildiz Technical University. He is currently an Associate Professor at the Naval Architecture Programme, Institute of Marine Sciences and Technology at Dokuz Eylul University, Izmir, Türkiye. His areas of research are behaviors of composite boat material in marine environments and structural analysis of small craft. He is a member of the Turkish Chamber of Naval Architects and Marine Engineers.

     ORCID logo EMAIL logo
Veröffentlicht/Copyright: 3. März 2025
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
Materials Testing
Aus der Zeitschrift Materials Testing Band 67 Heft 4

Abstract

It is essential to obtain preliminary design data of composite marine vehicles operated in harsh marine environments, such as those with hygrothermal and impact effects. The effects of hygrothermal aging and stacking sequence on the low-velocity impact (LVI) response of carbon fiber epoxy composite plates (CFRP) were investigated experimentally. CFRP plates in six orientations [0°/90°/45°/−45°]s, [90°/45°/−45°/0°]s, [0°/90°/0°/90°]s, [90°/0°/90°/0°]s, [−45°/45°/−45°/45°]s, and [45°/−45°/45°/−45°]s (quasi-isotropic, cross-ply, and angle-ply) were manufactured using a vacuum-assisted resin infusion method. LVI tests were performed by using the Ceast 9350 Fractovis Plus impact machine. Four aging conditions (atmospheric, 2, 4, and 6 weeks aged) were simulated using Ascott CC 1000ip programmable salt spray and cyclic corrosion test chamber cabin. The effect of the ply-stacking sequence plays an important role in the failure of the top or bottom surface of the plate samples and dent depth. When 0-degree fiber is used on the upper and lower surfaces of the plates, the dent depth is lowest, followed by 90, +45, and −45°, respectively. Dent depth and top surface fiber cracking lengths generally decrease as the process begins with initial atmospheric conditions reaching 6 weeks.

Keywords: CFRP composite plates; low-velocity impact (LVI); hygrothermal aging; ply-stacking sequence; experimental study
Corresponding author: Erkin Altunsaray, Institute of Marine Science and Technology, Dokuz Eylul Universitesi, Haydar Aliyev Bul. No:32 Inciralti Balcova, Izmir, Türkiye, E-mail:

Funding source: Dokuz Eylul University

Award Identifier / Grant number: 2021.KB.FEN.002

About the authors

Mustafa Biçer

Mustafa Biçer, born in 1981, received his BSc degree in 2005 at the Department of Industrial Design at Anadolu University, his MSc degree in 2023 Naval Architecture branch of the Graduate School of Natural and Applied Sciences, Dokuz Eylul University, Izmir, Türkiye. He worked on Mega Yacht, Prototype, and Industrial Design projects in various companies in Istanbul, Türkiye for 10 years. He is currently a lecturer at the Industrial Design Department at Yasar University, Izmir, Türkiye.

Erkin Altunsaray

Dr. Erkin Altunsaray, born in 1977, received his BSc degree in 2000 at the Department of Naval Architecture and Marine Engineering, Yildiz Technical University, İstanbul, Türkiye, his MSc degree in 2005 at the Naval Architecture branch of the Graduate School of Natural and Applied Sciences, Dokuz Eylul University, Izmir, Türkiye, and his PhD degree in 2011 at the Naval Architecture and Marine Engineering branch of the Graduate School of Natural and Applied Sciences, Yildiz Technical University. He is currently an Associate Professor at the Naval Architecture Programme, Institute of Marine Sciences and Technology at Dokuz Eylul University, Izmir, Türkiye. His areas of research are behaviors of composite boat material in marine environments and structural analysis of small craft. He is a member of the Turkish Chamber of Naval Architects and Marine Engineers.

Acknowledgments

The authors would like to thank Dokuz Eylül University, the Department of Scientific Research Project, and the Mechanical Engineering Composite Research and Test Laboratory for their support.

  1. Research ethics: Not applicable.

  2. Informed consent: Informed consent was obtained from all individuals included in this study, or their legal guardians or wards.

  3. Author contributions: “The author(s) have (has) accepted responsibility for the entire content of this manuscript and approved its submission.”

  4. Use of Large Language Models, AI and Machine Learning Tools: Licensed Grammarly was used to improve the manuscript language to checked and improved.

  5. Conflict of interest: The authors state no conflict of interest.

  6. Research funding: This study was supported by the Dokuz Eylul University, Department of Scientific Research Project (Project Number: 2021.KB.FEN.002).

  7. Data availability: Not applicable.

References

[1] A. P. Mouritz, E. Gellert, P. Burchill, and K. Challis, “Review of advanced composite structures for naval ships and submarines,” Compos. Struct., vol. 53, no. 1, 2001, https://doi.org/10.1016/S0263-8223(00)00175-6.Suche in Google Scholar

[2] G. Neşer, “Polymer based composites in marine use: history and future trends,” Procedia Eng., vol. 194, pp. 19–24, 2017, https://doi.org/10.1016/j.proeng.2017.08.111.Suche in Google Scholar

[3] F. Rubino, A. Nisticò, F. Tucci, and P. Carlone, “Marine application of fiber reinforced composites: a review,” J. Mar. Sci. Eng., vol. 8, no. 1, p. 26, 2020, https://doi.org/10.3390/jmse8010026.Suche in Google Scholar

[4] P. Baur, A. Roy, P. Casari, D. Choqueuse, and P. Davies, “Structural mechanical testing of a full-size adhesively bonded motorboat,” in Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 2004, pp. 259–265.10.1177/147509020421800405Suche in Google Scholar

[5] A. Windyandari, O. Kurdi, Sulardjaka, and T. Mohammad, “Bow structure damage analysis for hybrid coir-glass fiber composite fishing boat hull subjected to front collision load,” Curved Layer. Struct., vol. 9, no. 1, pp. 236–257, 2022, https://doi.org/10.1515/cls-2022-0020.Suche in Google Scholar

[6] A. Saylık and Ş. Temiz, “Low-speed impact behavior of fiber-reinforced polymer-based glass, carbon, and glass/carbon hybrid composites,” Mater. Test., vol. 64, no. 6, pp. 820–831, 2022, https://doi.org/10.1515/mt-2021-2179.Suche in Google Scholar

[7] A. K. J. Al-Shamary, R. Karakuzu, H. Kandas, and O. Ozdemir, “Experimental investigation of the impact behavior of glass/epoxy composite materials with the natural fiber layer,” Mater. Test., vol. 64, no. 6, pp. 780–786, 2022, https://doi.org/10.1515/mt-2021-2133.Suche in Google Scholar

[8] A. K. J. Al-Shamary, R. Karakuzu, H. Kandas, and O. Ozdemir, “Low velocity impact response of sandwich composites with hybrid glass/natural fiber face-sheet and PET foam core,” Mater. Test., vol. 64, no. 10, pp. 1465–1479, 2022, https://doi.org/10.1515/mt-2022-0151.Suche in Google Scholar

[9] S. Abrate, Impact on Composite Structures, NY, USA, Cambridge University Press, 1998.10.1017/CBO9780511574504Suche in Google Scholar

[10] S. Abrate, Impact Engineering of Composite Structures, NY, USA, Springer-Verlag Wien, 2011.10.1007/978-3-7091-0523-8Suche in Google Scholar

[11] S. Lin and A. M. Waas, “The effect of stacking sequence on the LVI damage of laminated composites; experiments and analysis,” Compos. Part A: Appl. Sci. Manuf., vol. 145, p. 106377, 2021, https://doi.org/10.1016/j.compositesa.2021.106377.Suche in Google Scholar

[12] L. S. Sutherland, “A review of impact testing on marine composite materials: Part I – marine impacts on marine composites,” Compos. Struct., vol. 188, pp. 197–208, 2018, https://doi.org/10.1016/j.compstruct.2017.12.073.Suche in Google Scholar

[13] L. S. Sutherland, “A review of impact testing on marine composite materials: Part II – impact event and material parameters,” Compos. Struct., vol. 188, pp. 503–511, 2018, https://doi.org/10.1016/j.compstruct.2018.01.041.Suche in Google Scholar

[14] L. S. Sutherland, “A review of impact testing on marine composite materials: Part III - damage tolerance and durability,” Compos. Struct., vol. 188, pp. 512–518, 2018, https://doi.org/10.1016/j.compstruct.2018.01.042.Suche in Google Scholar

[15] L. S. Sutherland, “A review of impact testing on marine composite materials: Part IV – scaling, strain rate and marine-type laminates,” Compos. Struct., vol. 200, pp. 929–938, 2018, https://doi.org/10.1016/j.compstruct.2018.06.052.Suche in Google Scholar

[16] L. H. Strait, M. L. Karasek, and M. F. Amateau, “Effects of seawater immersion on the impact resistance of glass fiber reinforced epoxy composites,” J. Compos. Mater., vol. 26, pp. 2118–2133, 1992, https://doi.org/10.1177/002199839202601.Suche in Google Scholar

[17] F. Korkees, C. Arnold, and S. Alston, “Water absorption and low-energy impact and their role in the failure of ±45° carbon fibre composites,” Polym. Compos., vol. 39, pp. 2771–2782, 2018, https://doi.org/10.1002/pc.24269.Suche in Google Scholar

[18] D. K. Jesthi and R. K. Nayak, “Evaluation of mechanical properties and morphology of seawater aged carbon and glass fiber reinforced polymer hybrid composites,” Composites, Part B: Eng, vol. 174, p. 106980, 2019, https://doi.org/10.1016/j.compositesb.2019.106980.Suche in Google Scholar

[19] I. García-Moreno, M. Á. Caminero, G. P. Rodríguez, and J. J. Lopez-Cela, “Effect of thermal ageing on the impact damage resistance and tolerance of carbon-fibre-reinforced epoxy laminates,” Polymers, vol. 11, no. 1, p. 160, 2019, https://doi.org/10.3390/polym11010160.Suche in Google Scholar PubMed PubMed Central

[20] S. Ma, Y. He, L. Hui, and L. Xu, “Effects of hygrothermal and thermal aging on the low-velocity impact properties of carbon fiber composites,” Adv. Compos. Mater., vol. 29, no. 1, pp. 55–72, 2020, https://doi.org/10.1080/09243046.2019.1630054.Suche in Google Scholar

[21] S. Zhou, Y. X. Jia, L. Xu, L. Wang, and L. Hui, “Study on the damage behavior of carbon fiber composite after low-velocity impact under hygrothermal aging,” J. Appl. Polym. Sci., vol. 138, p. 9, 2021, https://doi.org/10.3390/polym14235089.Suche in Google Scholar PubMed PubMed Central

[22] D. K. Jesthi, S. Saroj, and S. Nayak, “The influence of seawater on mechanical properties of hybrid carbon and glass fiber polymer composites,” in Materials Today: Proceedings, vol. 49, 2022, pp. 507–509.10.1016/j.matpr.2021.03.210Suche in Google Scholar

[23] F. Taheri-Behrooz and M. Torabia, “Low-velocity impact performance of the carbon/epoxy plates exposed to the cyclic temperature,” Steel Compos. Struct., vol. 48, no. 3, pp. 305–320, 2023, https://doi.org/10.12989/scs.2023.48.3.305.Suche in Google Scholar

[24] R. Karakuzu, H. Kanlioglu, and M. E. Deniz, “Environmental effects on mechanical properties of glass-epoxy composites,” Mater. Test., vol. 56, no. 5, pp. 355–361, 2014, https://doi.org/10.3139/120.110576.Suche in Google Scholar

[25] E. U. Yüncüoğlu, S. T. Ince, and E. Bağcı, “Strength of carbon fiber/epoxy in sea water,” Mater. Test., vol. 63, no. 9, pp. 811–815, 2021, https://doi.org/10.1515/mt-2021-0005.Suche in Google Scholar

[26] F. Kompozitsan, “İzmir, Türkiye,” 2024. https://www.kompozitsan.com/tr/.Suche in Google Scholar

[27] ASTM D3039/D3039M-08 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials D3039, Annual Book of ASTM Standards, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, USA, ASTM International, 2014.Suche in Google Scholar

[28] ASTM D6641/D6641M-16e2 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, USA, ASTM International, 2023.Suche in Google Scholar

[29] ASTM-D7078, Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. USA, ASTM International,, ASTM International, 2017.Suche in Google Scholar

[30] H. H. Baykal and G. Neser, “Synergistic performance degradation of marine structural elements: case study of polymer-based composite and steel hybrid double lap joints,” Pol. Marit. Res., vol. 30, pp. 111–118, 2023, https://doi.org/10.2478/pomr-2023-0044.Suche in Google Scholar

[31] O. Ozdemir, R. Karakuzu, and A. K. J. Al-Shamary, “Core-thickness effect on the impact response of sandwich composites with poly(vinyl chloride) and poly(ethylene terephthalate) foam cores,” J. Compos. Mater., vol. 49, pp. 1315–1329, 2015, https://doi.org/10.1177/0021998314533597.Suche in Google Scholar

[32] A. K. J. Al-Shamary, R. Karakuzu, and O. Ozdemir, “Low-velocity impact response of sandwich composites with different foam core configurations,” J. Sandw. Struct. Mater., vol. 18, no. 6, pp. 754–768, 2016, https://doi.org/10.1177/1099636216653267.Suche in Google Scholar

[33] A. Pourfarivarnezhad, O. Ozdemir, and M. E. Deniz, “Impact response of sandwich composites reinforced with metal wastes under single and repeated low-velocity impact loads,” Mech. Adv. Mater. Struct., vol. 31, no. 30, pp. 13401–13411, https://doi.org/10.1080/15376494.2023.2277856.Suche in Google Scholar

[34] O. A. Aydın, et al.., “Recycled Ti6Al4V alloy powder reinforced polyurethane core based sandwich structures: mechanical and modal properties,” J. Reinf. Plast. Compos., vol. 43, pp. 19–20, 2023, https://doi.org/10.1177/07316844231201008.Suche in Google Scholar

[35] C. Koçhan, “Low velocity impact behaviour of recycled mussel shell particles reinforced epoxy composites,” Mater. Res. Express, vol. 6, no. 8, p. 085105, 2019, https://doi.org/10.1088/2053-1591/ab21ff.Suche in Google Scholar

[36] R. Karakuzu, S. Kıyık, and H. Kandas, “Low-velocity impact and compression-after-impact behaviors of S2-glass/epoxy laminated composites under impact loading at low temperatures,” Mech. Adv. Mater. Struct., vol. 31, no. 30, pp. 13390–13400, 2023, https://doi.org/10.1080/15376494.2023.2280725.Suche in Google Scholar

[37] A. Doğan, Mechanical Behavior of Composites Subjected to Different Environmental Effects, MSc Thesis (in Turkish), Dokuz Eylul University, Izmir, 2014.Suche in Google Scholar

[38] A. Dogan and C. Atas, “Variation of the mechanical properties of E-glass/epoxy composites subjected to hygrothermal aging,” J. Compos. Mater., vol. 50, no. 5, pp. 637–646, 2016, https://doi.org/10.1177/0021998315580451.Suche in Google Scholar

[39] A. Doğan and Y. Arman, “The effect of hygrothermal aging on the glass and carbon reinforced epoxy composites for different stacking sequences,” Mechanics, vol. 24, no. 1, pp. 19–25, 2018, https://doi.org/10.5755/j01.mech.24.1.18508.Suche in Google Scholar

[40] T. K. Tsotsis, S. Keller, K. Lee, J. Bardis, and J. Bish, “Aging of polymeric composite specimens for 5000 hours at elevated pressure and temperature,” Compos. Sci. Technol., vol. 61, no. 1, pp. 75–86, 2001, https://doi.org/10.1016/S0266-3538(00)00196-2.Suche in Google Scholar

[41] A. Dogan and Y. Arman, “The effect of hygrothermal aging and UV radiation on the low-velocity impact behavior of the glass fiber-reinforced epoxy composites,” Iran. Polym. J., vol. 28, pp. 193–201, 2019, https://doi.org/10.1007/s13726-019-00690-x.Suche in Google Scholar

[42] M. Sayer, N. B. Bektaş, and H. Çallioǧlu, “Impact behavior of hybrid composite plates,” J. Appl. Polym. Sci., vol. 118, pp. 580–587, 2010, https://doi.org/10.1002/app.32437.Suche in Google Scholar

[43] M. A. Caminero, I. García-Moreno, and G. P. Rodríguez, “Damage resistance of carbon fibre reinforced epoxy laminates subjected to low velocity impact: effects of laminate thickness and ply-stacking sequence,” Polym. Test., vol. 63, pp. 530–541, 2017, https://doi.org/10.1016/j.polymertesting.2017.09.016.Suche in Google Scholar
Published Online: 2025-03-03
Published in Print: 2025-04-28

© 2025 Walter de Gruyter GmbH, Berlin/Boston

Artikel in diesem Heft

  1. Frontmatter
  2. Bending of wavy spider web honeycomb sandwich structures using PLA
  3. Tensile testing of high-speed rail wheels using tiny specimens
  4. Impact breaking energies and transition temperatures of construction steels produced from scrap
  5. Creep failure analysis of directionally solidified CM247LC superalloy
  6. Corrosion behavior of a dissimilar Inconel 625 superalloy and AISI 316L stainless steel weld
  7. Electrochemical investigation on the resistance of batch hot-dip galvanized coatings using a gel-type electrolyte
  8. Effect of austempering on wear resistance of GGG50 nodular cast iron
  9. Enhanced hippopotamus optimization algorithm and artificial neural network for mechanical component design
  10. Application of the incremental hole-drilling method for residual stress determination in type 4 pressure vessels
  11. Fatigue strength of welded armor steels with different weld penetration
  12. Effect of hybridization type, hole-distance and number of holes on the resistance of intraply hybrid composite plates against multiple impact
  13. Effect of hygrothermal aging and ply-stacking sequence on low-velocity impact properties of CFRP composite plates
  14. Modelling the phase homogenization subsequent to the boriding process
  15. Optimal hydraulic engine mount parameters using design of experiment (DoE) and response surface methodology
  16. Improved material generation algorithm by opposition-based learning and laplacian crossover for global optimization and advances in real-world engineering problems
https://doi.org/10.1515/mt-2024-0395
Schlagwörter für diesen Artikel
CFRP composite plates; low-velocity impact (LVI); hygrothermal aging; ply-stacking sequence; experimental study

Artikel in diesem Heft

  1. Frontmatter
  2. Bending of wavy spider web honeycomb sandwich structures using PLA
  3. Tensile testing of high-speed rail wheels using tiny specimens
  4. Impact breaking energies and transition temperatures of construction steels produced from scrap
  5. Creep failure analysis of directionally solidified CM247LC superalloy
  6. Corrosion behavior of a dissimilar Inconel 625 superalloy and AISI 316L stainless steel weld
  7. Electrochemical investigation on the resistance of batch hot-dip galvanized coatings using a gel-type electrolyte
  8. Effect of austempering on wear resistance of GGG50 nodular cast iron
  9. Enhanced hippopotamus optimization algorithm and artificial neural network for mechanical component design
  10. Application of the incremental hole-drilling method for residual stress determination in type 4 pressure vessels
  11. Fatigue strength of welded armor steels with different weld penetration
  12. Effect of hybridization type, hole-distance and number of holes on the resistance of intraply hybrid composite plates against multiple impact
  13. Effect of hygrothermal aging and ply-stacking sequence on low-velocity impact properties of CFRP composite plates
  14. Modelling the phase homogenization subsequent to the boriding process
  15. Optimal hydraulic engine mount parameters using design of experiment (DoE) and response surface methodology
  16. Improved material generation algorithm by opposition-based learning and laplacian crossover for global optimization and advances in real-world engineering problems
Heruntergeladen am 27.4.2026 von https://www.degruyterbrill.com/document/doi/10.1515/mt-2024-0395/html?lang=de
Button zum nach oben scrollen