Home Wetting contact line modeling in high-speed jet coating
Article
Licensed
Unlicensed Requires Authentication

Wetting contact line modeling in high-speed jet coating

  • Alfa Arzate and Philippe A. Tanguy
Published/Copyright: July 19, 2018
Become an author with De Gruyter Brill
Submit Manuscript Author Information
Nordic Pulp & Paper Research Journal
From the journal Nordic Pulp & Paper Research Journal Volume 20 Issue 2

Published Online: 2018-07-19
Published in Print: 2005-05-01

© 2018 by Walter de Gruyter Berlin/Boston

Articles in the same Issue

  1. Contents
  2. In-plane hygro-viscoelasticity of paper at small deformations
  3. Reducing moisture transients in the paper-machine drying section with the mid-ranging control technique
  4. Comparing colloidal pitch adsorption on different talcs
  5. Factors affecting white pitch deposition
  6. Effect of refining intensity on pressure screen fractionated softwood kraft
  7. Influence of pore structure and water retaining ability of fibres on the strength of papers from unbleached kraft fibres
  8. Influence of fibre/fibre joint strength and fibre flexibility on the strength of papers from unbleached kraft fibres
  9. Interactions between charged latex colloids and starch polyelectrolytes studied by fluorescence microscopy with image analysis
  10. Chemoenzymatic modifications of charge in chemithermomechanical wood pulp
  11. Experimental studies on dewatering during roll forming of paper
  12. A theoretical analysis of the flow stability in roll forming of paper
  13. Wetting contact line modeling in high-speed jet coating
  14. Effect of relative humidity and unreacted AKD on AKD sizing
  15. Borate autocausticizing equilibria in recovery boiler smelt
  16. Effect of web tension on load- and moisture-induced waviness
  17. The influence of ink pigment penetration and paper structure on print through
  18. Floc dynamics in flowing fibre suspensions
  19. Influence of surface active substances on AKD sizing
https://doi.org/10.3183/npprj-2005-20-02-p217-226
Keywords for this article
Coating colors; High-speed jet coating; Jet impingement dynamics; Paper coating; Rheological properties; Wetting contact line

Articles in the same Issue

  1. Contents
  2. In-plane hygro-viscoelasticity of paper at small deformations
  3. Reducing moisture transients in the paper-machine drying section with the mid-ranging control technique
  4. Comparing colloidal pitch adsorption on different talcs
  5. Factors affecting white pitch deposition
  6. Effect of refining intensity on pressure screen fractionated softwood kraft
  7. Influence of pore structure and water retaining ability of fibres on the strength of papers from unbleached kraft fibres
  8. Influence of fibre/fibre joint strength and fibre flexibility on the strength of papers from unbleached kraft fibres
  9. Interactions between charged latex colloids and starch polyelectrolytes studied by fluorescence microscopy with image analysis
  10. Chemoenzymatic modifications of charge in chemithermomechanical wood pulp
  11. Experimental studies on dewatering during roll forming of paper
  12. A theoretical analysis of the flow stability in roll forming of paper
  13. Wetting contact line modeling in high-speed jet coating
  14. Effect of relative humidity and unreacted AKD on AKD sizing
  15. Borate autocausticizing equilibria in recovery boiler smelt
  16. Effect of web tension on load- and moisture-induced waviness
  17. The influence of ink pigment penetration and paper structure on print through
  18. Floc dynamics in flowing fibre suspensions
  19. Influence of surface active substances on AKD sizing
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 25.9.2025 from https://www.degruyterbrill.com/document/doi/10.3183/npprj-2005-20-02-p217-226/html
Scroll to top button