Home Effect of drawing with shear on structure and properties of low-carbon steel
Article
Licensed
Unlicensed Requires Authentication

Effect of drawing with shear on structure and properties of low-carbon steel

  • Elena Pashinskaya , Anatoly Zavdoveev , Sergey Mironov , Victor Varyukhin and Anna Maksakova
Published/Copyright: February 26, 2016
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 107 Issue 3

Abstract

The feasibility of drawing with shear of low-carbon steel for wire production was studied. The new approach was shown to be more effective in producing of homogeneous microstructure with refined grain size, reduced porosity and increased mechanical strength. These effects were attributed to a specific “twist” character of material flow.

Keywords: Low carbon steel; Severe plastic deformation; Wiredrawing; Microstructure
*Correspondence address, Dr. Sergey Mironov, Department of Materials Processing, Graduate School of Engineering, Tohoku University, 6-6-02 Aramaki-aza-Aoba, Aoba-ku, Sendai 980-8579, Japan. Tel.: +81-22-795-7353, Fax: +81-22-795-7352, E-mail:

References

[1] R.Z.Valiev, I.V.Alexandrov: Nanostructured materials produced by severe plastic deformation, Logos, Moscow (2000).Search in Google Scholar

[2] Y.Estrin, A.Vinogradov: Acta Mater.61 (2013) 782. 10.1016/j.actamat.2012.10.038Search in Google Scholar

[3] E.Pashinska, M.Myshlyaev, S.Mironov, V.Varyukhin: Phys. Met. Metal.105 (2008) 86. 10.1134/S0031918X08010080Search in Google Scholar

[4] E.Pashinska, V.Varykhin, S.Dobatkin, A.Zavdoveev: Emerging Mater. Res.2 (2013) 139. 10.1680/emr.14.00016Search in Google Scholar

[5] S.K.Hwang, H.M.Baek, Y.-T.Im, I.-H.Son, C.M.Bae, H.W.Lee: J. Mater. Proc. Technol.214 (2014) 1398. 10.1016/j.jmatprotec.2014.02.001Search in Google Scholar

[6] S.K.Hwang, H.M.Baek, L.-H.Son, Y.-T.Im, C.M.Bae: Mater. Sci. Eng. A579 (2013) 118. 10.1016/j.msea.2013.05.005Search in Google Scholar

[7] K.Muszka, L.Madej, J.Majta: Mater. Sci. Eng. A574 (2013) 68. 10.1016/j.msea.2013.03.024Search in Google Scholar

[8] E.Astafurova, G.Zaharova, E.Najdenkin, G.Raab, P.Odesskij, S.Dobatkin: Pisma o Materialakh1 (2011) 198.Search in Google Scholar

[9] E.Astafurova, G.Zaharova, E.Najdenkin, S.Dobatkin, G.Raab: Phys. Mech. Mater.110 (2010) 260. 10.1134/S0031918X10090097Search in Google Scholar

[10] E.Pashinska, V.Varyukhin, M.Myshlaev, A.Zavdoveev: Adv. Eng. Mater.16 (2014) 26. 10.1002/adem.201300197.Search in Google Scholar

[11] M.A.Carruth, J.M.Allwood: J. Mater. Proc. Technol.212 (2012) 1640. 10.1016/j.jmatprotec.2012.03.006.Search in Google Scholar

[12] E.Pashinska, A.Maksakova, A.Zavdoveev, V.Tkachenko, in: Influence of drawing with shear technology on the structure and properties of low-carbon wire, Proc. “Mechanical technologies and structural materials”, Split, Croatia (2014) 125–130.Search in Google Scholar

[13] Y.Beygelzimer, D.Orlov, A.Korshunov, S.Synkov, V.Varyukhin, I.Vedernikova, A.Reshetov, A.Synkov, L.Polyakov, I.Korotchenkova: Solid State Phenom.114 (2006) 69. 10.4028/www.scientific.net/SSP.114.69Search in Google Scholar

[14] D.Orlov, Y.Todaka, M.Umemoto, Y.Beygelzimer, N.Tsuji: Mater. Trans.53 (2012) 17. 10.2320/matertrans.MD201113Search in Google Scholar

Received: 2015-08-03
Accepted: 2015-10-28
Published Online: 2016-02-26
Published in Print: 2016-03-11

© 2016, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Fe–N and Fe–N–C phase equilibria above 853 K studied by nitriding/nitrocarburising and secondary annealing
  5. Microstructural development and crystallographic properties of decomposing Fe–N–C compound layers
  6. Experimental study on phase relationships in the Co-rich portion of the Co–Ti–Zr system
  7. On the role of alloying elements in the formation of serrated grain boundaries in Ni-based alloys
  8. Effect of drawing with shear on structure and properties of low-carbon steel
  9. Experimental study of FLD0 for aluminum alloy using digital image correlation with modified ISO method
  10. Global modeling for elevated temperature flow behavior of 6013 aluminum alloy during two-pass deformation
  11. The relationship between the pore size distribution and the thermo-mechanical properties of high alumina refractory castables
  12. Optimization of the phase composition of high-calcium-content slag for stabilization and the obtaining of hydraulic properties
  13. Short Communications
  14. Dynamic recrystallization kinetics in Mg-3Gd-1Zn magnesium alloy during hot deformation
  15. Original Contributions
  16. Photoluminescence properties of Tb3+-doped stalk-like Al2O3
  17. Effect of deposition parameters on the crystal orientation and growth of Ag nanowires
  18. DGM News
  19. DGM News
https://doi.org/10.3139/146.111338
Keywords for this article
Low carbon steel; Severe plastic deformation; Wiredrawing; Microstructure

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Fe–N and Fe–N–C phase equilibria above 853 K studied by nitriding/nitrocarburising and secondary annealing
  5. Microstructural development and crystallographic properties of decomposing Fe–N–C compound layers
  6. Experimental study on phase relationships in the Co-rich portion of the Co–Ti–Zr system
  7. On the role of alloying elements in the formation of serrated grain boundaries in Ni-based alloys
  8. Effect of drawing with shear on structure and properties of low-carbon steel
  9. Experimental study of FLD0 for aluminum alloy using digital image correlation with modified ISO method
  10. Global modeling for elevated temperature flow behavior of 6013 aluminum alloy during two-pass deformation
  11. The relationship between the pore size distribution and the thermo-mechanical properties of high alumina refractory castables
  12. Optimization of the phase composition of high-calcium-content slag for stabilization and the obtaining of hydraulic properties
  13. Short Communications
  14. Dynamic recrystallization kinetics in Mg-3Gd-1Zn magnesium alloy during hot deformation
  15. Original Contributions
  16. Photoluminescence properties of Tb3+-doped stalk-like Al2O3
  17. Effect of deposition parameters on the crystal orientation and growth of Ag nanowires
  18. DGM News
  19. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 3.10.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.111338/html
Scroll to top button