An Adaptive Harmonic Current Detection for Improving the Power Quality in Power Grid

Chapters in this book

1. Frontmatter 1
2. Keynote Speech I. Strategies for Improving Hydropower Development 5
3. Keynote Speech II. Biotemplated Mesoporous Materials for Wastewater Treatments 7
4. Keynote Speech III. Design of Hard and Superhard Nanocomposites for Harsh Environment 9
5. Keynote Speech IV. Numerical Simulation of Slag Corrosion Behavior of Lightweight Refractories for Refining Ladles 11
6. Keynote Speech V. Precision Plastic Forming of Large Complex Component of Ti-Alloy 13
7. Study about the Landslide Deformation Forecast Model Based on Kalman Filter Method and Taylor Seris and Material Properties 15
8. Effects of Machining Process and Heat Treatment on the Mechanical Properties and Microstructure of TB2 Titanium Alloy Strip 25
9. Study on Compound Characteristics of Oleic Acid, Glycerol and Organic Ester in Grinding Fluid 33
10. Novel Room-Temperature Molten Salt Based on Chlorine Chloride with Hydrogen Bond Donors 41
11. Study on Organic Modification of Aluminum Powder Coating 49
12. Study on Material of Exothermic Insulation Riser Sleeve 59
13. The Efficiency Calculation of Cobalt Oxide for Artificial Photosynthesis with Exponential- Doping 69
14. Microscale Hierarchical Three-Dimensional Flowerlike CuO: Synthesis, Characterization, and its Supernormal Photocatalytic Activity under Visible Light Irradiation 81
15. The Distribution Behavior of Phosphorus at Non-Equilibrium Condition Simulating the Casting Ladle 91
16. Effects of Zr Addition on the Microstructure and Mechanical Properties of AlCoCrFeNiZr_x High-Entropy Alloys 101
17. Research and Preparation of Super Hydrophobic and Self-Cleaning PVDF Membrane 111
18. Preparation and Characterization of TiB₂ Coatings with Ultra-Low Residual Stress 125
19. Crystal Structure and Microwave Dielectric Properties of Ca [(Li_1/3Nb_2/3)_0.9Zr_0.1]O_3-δ−xTiO₂ ceramics 135
20. Mechanism of Mechanochemical Reactions in Magnesium-Aluminium Layered Double Hydroxides Systems 141
21. Deposition of Diamond Films on Complex Cutting Tools by Hot-Filament Chemical Vapor Deposition 153
22. The Crystal Unit Model of CsI(Tl) Film with Hexagon Microcolumns and Its Conversion Factor to X-Ray 161
23. Effect of Ion Etching on the Surface Morphology, Structure and Adhesive Strength of the TiN Coating 173
24. Influences of Photocatalytic Activity by TiO₂ Doping with Graphene Oxide and Lanthanum on the Carrier of Cenosphere 183
25. Synthesis and Luminescence Properties of Eu³⁺-Doped NaTb(MoO₄)₂ Hierarchical Microcrystals 193
26. Pt_xNi/meso-Al₂O₃ (x = 0.60–2.07): High- Performance Catalysts for the Hydrogenation of N-Butanal at Low Temperatures 201
27. Hysteretic Behavior of CFT Columns with Semi- Rigid Base Connection under Different Loading Modes 213
28. Behavior of Liquid Phase Generation of High Phosphorus Oolitic Hematite during Sinter 221
29. Influence of the UUV Body on the Performance of the Propeller 231
30. Piezoresistivity of Polyethylene Terephthalate Nickel Powder Composite 239
31. Preparation of Ti-Cu Alloying Surface Layer on Ti6Al4V Substrate via Friction Stir Processing for Flame-Retardant Performance 251
32. Failure Analysis of Escalator Step Induced by the Bolt Surface Defects 265
33. Surface Wear Mechanism of Escalator Step Chain: A Failure Analysis 281
34. Toxicity Reduction Mechanism of ZnO NPs during Sludge Vermicomposting Process 293
35. A Nanocomposite Film of Polyoxometalate and TiO₂: Preparation, Characterization and Photochromic Property 303
36. Application of Inductively Couled Plasma- Mass Spectrometry to the Speciation Analysis of Rare Earth Elements in Ion-Adsorption Rare Earth Ore 313
37. Electronic Structure of Cu₂ZnSn_1-xGe_xS₄ New Energy Materials Probed by Soft X-Ray Absorption Spectroscopy 329
38. Preparation and Performance of a Chitosan/TiO₂ Composite Film by Lyer-by- Layer Method 339
39. Facile Route to Synthetize Lanthanum Doped Titanium Dioxide Films for Improved Photocatalytic Performance 349
40. Contact Property of Au on p-InP 357
41. Effect of Polyethylene Oxide Concentration on Separation Performance of PVDF Hollow Fiber Plasma Separation Membrane 365
42. Influence of Phosphate Concentration and PH Crystallization of Magnesium Ammonium Phosphate (MAP) 373
43. Microstructure and Corrosion Resistance of CrMoVNbFex High-entropy Alloys 383
44. Finite Element Analysis of Composite Shear Walls with Double Steel Plates and Filled Concrete for a Nuclear Island Structure under In-Plane Loading 391
45. Exothermal Combustion Synthesis of the Composites TiB₂/Ni from Ni–Ti–B System 413
46. Research on Wetting Characteristics of Normal Acid, Alcohol and Alkane on Surface of Monocrystal Silicon 421
47. Effect of Modified Argon Oxygen Decarburization (AOD) Stainless Steel Slag on Cementitious Properties 429
48. Optimization of structure Design of Physical Vapour Transport Furnace for Silicon Carbide (SiC) Crystal Growth via Numerical Simulation 443
49. Thermodynamical Analysis of the Spontaneous Combustion of FeS 453
50. Cause and Prediction Model of Low Infrared Emissivity for Resin/Flaky Metal Composite Coatings 459
51. Synthesis and Characterization of Modified Carbon Aerogels 467
52. A Review on the Application of Photocatalytic Materials 473
53. The Preparation of Nano ZnO/PVC and the Photocatalytic Degration of Waste Water from Seafood Processing 481
54. Efficient Adsorptive Removal of Arsenic from Water by Titanium-Based Metal-Organic Frameworks (MIL-125) 493
55. The Research of SVG in Three-Phase Four-Wire Power System 503
56. The Application of CDMA Technology in the Measurement of Antenna Array 513
57. Synthesis and Bactericidal Properties of MgO/TiO₂ Nano-Composites 525
58. Effects of Assisting Agents Concentrations on Energy Consumption during the Electrokinetic Treatment of Contaminated Kaolin 537
59. Development of a Solid State pH Sensor Based on Electrodeposited Iridium Oxide Films for Water Quality Detection 547
60. Simple Fabrication of ZnO Hierarchical Structures with Enhanced Photocatalytic Activity 559
61. Enhanced Cycling Stability of Multi-Cations Doped Spinel Lithium Manganese Oxide for Rechargeable Lithium Batteries 569
62. Review on the Applications of Phase Change Materials (PCMs) for Building Envelopes 577
63. Damage Analysis of Cast Iron Specimen with Different Crack Forms 585
64. Study on the Performance of a High-Pressure Water Jet Dust Collector in a Powder Feeding Port of Explosive Sites 595
65. Self-Assembled Grapheme / Carbon Nanotube Fibers as Electrodes for Super Capacitors 607
66. Fatigue Life Prediction of a Kind of Frequentlyused Bolt under Random Excitations 613
67. Research on Development of Armor Protection Materials and Technology 623
68. Cold forming Cracking Reason and Solution Method of SS400 Hot Rolled Steel 631
69. Effect of Flow Rate of Cooling Water on the Interfacial Heat Transfer Coefficient between Modular Water-Cooled Mold and Casting 641
70. Study on High-Absorption Chrome Tanning Technology Assisted by CO₂ Low Temperature Plasma Treatment 651
71. Simulation of Q345 Steel Billet Solidification Microstructure in Continuous Casting Based on Matlab 661
72. Preparation and Properties of Neopentyl Glycol/Epoxy Resin Composite Phase Change Material for Thermal Energy Storage 673
73. Hysteric Property Analysis for Semi-Rigid Base Connection of Concrete-Filled Square Steel Tubular Columns 683
74. An Adaptive Harmonic Current Detection for Improving the Power Quality in Power Grid 695
75. Paper Fiber Paper-Based ZnO Piezoelectric Nanogenerator for Self-Powered Energy Scavenging 705
76. Fabrication of Super-Hydrophobic Surface with Micro- Nano-Structure on Brass Substrate by Chemical Etching and Surface Modification 715
77. Preparation Technology and Experimental of Hydro-Thermal Method on Surface Modification of Biomedical Titanium 723
78. The Co-Pilot Position of Vehicle Noise Quality Prediction Based on SVM 733
79. Application of Aramid Fiber in Printed Circuit Board 743
80. Online Intelligent Sorting Method of Gold Ore based on LIBS Technology 753
81. Rapid Decolorization and Mineralization of Congo Red Using Fe₇₈Si₉B₁₃Amorphous Alloy by Photo Fenton-Like Process 765
82. Preparation of Ce, N-Codoped Mesoporous Titania Photocatalyst with High Photocatalytic Activity under Visible Light 777
83. Preparation of TiO₂/AC Composite and Characterization of Its Photocatalytic Activities 787
84. Electrocatalytic Oxidation Degradation of Reactive Red 2 799
85. Nanoscale Fe⁰ Supported on Three- Dimensional Graphene for the Removal of Methyl Orange from Water 813
86. Study on the Optimal Extraction of Coal Resources under the Constraint of Ecological Environment 821
87. Research on the Stability Calculation and Treatments of the Liyu Landslide in Zhuzhou City, Center Hunan Province 827
88. Procurement Cost Control of New Energy Vehicles Manufacturing Enterprise under Supply Chain Management 833
89. Domino Effect Index for Chemical Plants Based on Fishbone Analysis 841
90. Xinjiang Wind Power under “the Belt and Road Initiatives” Facing the Opportunities and Challenges 851
91. Analysis of the Fuel Efficiency of Airport End- Around Taxiway 859
92. Spatiotemporal Analysis on Pesticide Using in different Agriculture Lands over China 869
93. Policy Analysis and Capability Evaluation of China’s Cities in Response to Climate Change 879
94. Analysis of the Influence of Environmental Conditions on Individual SEFAE Rocket 893
95. Residual Characteristics of Organochlorine Pesticides in Four Kinds of Plants in Qingshitan Reservoir Region 901
96. Application and Research Progress of Toxicity Test of Daphnia Magna 909
97. Literature Mining-oriented Risk Management of Climate Change 917
98. Economic Evaluation of Renewable Energy Saving Technology Based on Analytic Hierarchy Process and Data Envelopment Analysis Method 935
99. Study on Modified Zeolite for Absorption of Fluoride in Water 951
100. Removal of Heavy Metal Ions from Aqeous Solution Using Bottom Ash as an Adsorbent 961
101. Research Progress of N₂O Production in Different Wastewater Treatment Processes 971
102. Application of Alternative Environmental Protection Leather in Clothing 983
103. The Application of Green Environmental Protection Material in Clothing Design 991
104. Full-Flow Balance Analysis of Copper in Municipal Wastewater Treatment Plant of Hardware Electron-Mechanical Industrial Area 999
105. Study on Biological Treatment -Fenton - Oxidation Treatment -Biological Treated Landfill Leachate 1009
106. Normal Section Bearing Capacity Test on Columns Composed by Fine Slag Aggregate Concrete 1017
107. A Nonlinear Rheological Model for Rocks Considering the Tertiary Creep Stage 1025
108. Construction of Multilayer Geo-Metadata Management System 1037
109. Automobile Body Shop Optimization Design of Displacement Ventilation 1047
110. The Research Progress of Polycyclic Aromatic Hydrocarbons Processing Technology in Coking Wastewater 1059
111. Experimental Investigation on Flexural Properties of Sisal Fiber Reinforced Foam Concrete 1069
112. Reservoir Modeling Constrained by Geological Conceptual Patterns of DC Oilfield in Llanos Basin 1079
113. Numerical Simulation of Mold Surface Built-up Welding Temperature Field Based on ANSYS 1091
114. Adsorption of β - HCH on Constructed Wetland Substrates 1099
115. Structure and Spatial Distribution of Greenhouse Gas Emissions from Livestock and Poultry Manure Management 1107
116. Study on Assimilable Organic Carbon (AOC) and Influencing Factors in Northern Living District Water Distribution System 1117
117. A New Magnetic Pb (II)-Imprinted Polymer as a Highly Selective Sorbent for Preconcentration and Determination of Lead Ions in Wastewater Samples 1129
118. Analysis on the Characteristics of Smog Pollution in the Urban Centre of Chongqing Municipal 1147
119. Remote Sensing Monitoring Analysis of Typical Islands in Paracel Islands 1155
120. The Structural Character and Optimal Design of Canal Aqueduct 1169
121. Different Aqueduct Structure Make and Design 1177
122. Liquefaction Technology of Rice Husk in Polyhydric Alcohols 1185
123. Study on Engineering Example of Risk Based Inspection and Verification of Acoustic Emission Inspection for Storage Tank Group 1195
124. Experimental Setup for Boron Meter Accuracy Analysis in Nuclear Reactor Environment 1205
125. Effects of Material Dispersion on Heat Transfer Analysis of Integrated Thermal Protection Systems 1213
126. Dust Pollution Emission Characteristics and Dust Suppression Effect of Porous Windbreak and Large Strip Warehouse Based on Wind Tunnel Experiments 1225
127. Removal of Cadmium, Iron and Sulfate from Synthetic Acid Rock Drainage Using Metal- Tolerant Sulfate Reducing Bacterial Sludge 1235
128. Measures to Prevent Subsea Wellhead Instability for Deepwater Drilling 1245
129. Simultaneous Analysis of Methanol, Ethyl Acetate and Fusel Oil in Wine 1257
130. Influence on Wetting Performance by Polarity Difference between Organic Acid and Organic Alcohol 1265
131. Evaluation and Application of Poverty Index Water Based on Principal Component Analysis 1273
132. Research Progress on Degradation of Polycyclic Aromatic Hydrocarbons in Cooking Flue Gas 1291
133. Measurements of Contact Angles for CO2- Brine-Berea Sandstones System at Reservoir Conditions 1299
134. The Numerical Simulation of the Surface Settlement and the Pile Horizontal Displacement Caused by the Foundation Pit Dewatering 1307
135. A Study on the Influence of Integrative Structure Combined with Subway Station and Underground Passage under Dynamic Load of Subway Train 1317
136. Research on Three-Dimensional Topographic Characteristics of Tensile Cement Stone Crack Surface 1331
137. Diurnal Fluctuations in Oxygen Release from Roots of Phragmites Australis in Constructed Wetland Systems 1339
138. Different Detection Methods for HPLC Analysis of Fatty Acid Methyl Esters in Biodiesel 1347
139. Measurement and Analysis of Sound Absorption Coefficient by the Method of Reverberation Chamber and Impedance Tube 1355
140. The Influence of Boundary Conditions on Sound Field in Long Space 1365
141. Two Methods of Measuring Reverberation Time and Sound Absorption Coefficient in Reverberation Room 1375
142. Investigation of Heat Transfer of a Square Impinging Air Jet on a Flat Surface using Thermochromic Liquid Crystal Sheet 1385
143. Drying Behavior of Fluidized Bed Dried Peppercorns 1395