Band 76, Heft 9

Waveform control of three kinds of chirped pulses (i.e. βt , βt 2 and βt 3 ) to produce harmonic spectra and attosecond pulses has been investigated. It is found that by properly choosing the chirps, the chirp delays and the other laser parameters, not only the instantaneous frequency of some specific half profiles can be decreased, but also its intensity can be increased. As a result, the free electron can receive more energy when it accelerates in these regions, thus leading to the extension of the harmonic cutoff and harmonic plateau. Finally, through the Fourier transformation of the harmonic spectra and by superposing some harmonics, three single attosecond pulses with the durations of 30 as, 33 as and 39 as can be obtained.

Nonlinear stable oscillations, solitary, periodic and shock waves in electron–positron–ion (EPI) quantum plasma in the presence of an external static magnetic field are reported. The Korteweg-de Vries-Burgers (KdVB) equation is derived by the reductive perturbation technique (RPT). The wave solution gives shock waves depending on various parameters as quantum diffraction parameter ( β ), electron and positron Fermi temperatures, and densities of the system species. Amplitude, polarity, speed, and width of wave solutions are remarkably modified by species densities, kinematic viscosity, and the Bohm potential. Existence of stable oscillation of ion-acoustic waves (IAWs) is shown by using the concept of phase plane analysis. Stability of wave solution is analysed by examining the Bohm potential effect. In the absence of dissipation, phase plane of the considered plasma system is analysed to discuss the existence of periodic wave solution. The results of this study could be helpful for comprehension of the wave features in dense quantum plasmas, like white dwarfs, laboratory plasma as interaction experiments of intense laser-solid matter and microelectronic devices.

This work aims to study nonlinear vibration of rotating composite laminated cylindrical shells under hygrothermal environment and radial harmonic excitation. Based on Love’s nonlinear shell theory, and considering the effects of rotation-induced initial hoop tension, centrifugal and Coriolis forces, the nonlinear partial differential equations of the shells are derived by Hamilton’s principle, in which the constitutive relation and material properties of the shells are both hygrothermal-dependent. Then, the Galerkin approach is applied to discrete the nonlinear partial differential equations, and the multiple scales method is adopted to obtain an analytical solution on the dynamic response of the nonlinear shells under primary resonances of forward and backward traveling wave, respectively. The stability of the solution is determined by using the Routh–Hurwitz criterion. Some interesting results on amplitude–frequency relations and nonlinear dynamic responses of the shells are proposed. Special attention is given to the combined effects of temperature and moisture concentration on nonlinear resonance behavior of the shells.

This paper focuses on the vibration characteristics of the parabolic functionally graded material (FGM) beam considering the axially moving and spinning motion. Based on the Hamilton’s principle, the governing equation of the beam is derived. Then, the Galerkin’s method is employed to solve the equation. The combined influence of axial speed, spinning speed, and geometric parameters on natural frequencies of the beam are investigated. What’s more, the axially moving and spinning motion can lead to a critical axial speed and critical spinning angular speed, respectively. These two critical speeds and stable region affected by different parameters are also discussed.

This paper aims to investigate the transfer of heat phenomenon in a hydromagnetic time dependent flow of micropolar fluid across an oscillating stretchable curved surface by using the Cattaneo–Christov heat flux model, which considers thermal relaxation time. An elastic curved surface that stretches back and forth causes the flow situation. The flow equations are derived as nonlinear partial differential equations by incorporating a curvilinear coordinates system, which is then solved analytically via the homotopy analysis method (HAM). The accuracy of the derived analytical results is also examined by using a finite-difference technique known as the Keller box method, and it is found to be in strong agreement. The influences of various physical characteristics such as material parameter, magnetic parameter, thermal relaxation parameter, a dimensionless radius of curvature, Prandtl number and ratio of surface’s oscillating frequency to its stretching rate parameter on angular velocity, fluid velocity, pressure, temperature, heat transmission rate, and skin friction and couple stress coefficient are depicted in detail with the help of graphs and tables. Furthermore, for the verification and validation of the current results, a tabular comparison of the published data in the literature for the case of flat oscillating surface versus curved oscillating surface is carried out and found to be in good agreement.

Trace estimators allow us to approximate thermodynamic equilibrium observables with astonishing accuracy. A prominent representative is the finite-temperature Lanczos method (FTLM) which relies on a Krylov space expansion of the exponential describing the Boltzmann weights. Here we report investigations of an alternative approach which employs Chebyshev polynomials. This method turns out to be also very accurate in general, but shows systematic inaccuracies at low temperatures that can be traced back to an improper behavior of the approximated density of states with and without smoothing kernel. Applications to archetypical quantum spin systems are discussed as examples.

In this paper, Sn-doped TiO 2 nanomaterials with varying concentrations were manufactured through a simple procedure. The fabricated TiO 2 and Sn loaded on TiO 2 nanoparticles were studied using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive X-rays, Fourier transform infrared spectroscopy, and resistance analyses. The benefits of dielectric constant and ac conductivity rise at high Sn loaded concentration on TiO 2 nanoparticles. The enhanced electrical conductivity is seen for STO3 (3.5% Sn doped TiO 2 ) and STO4 (5% Sn doped TiO 2 ) specimens are apparently associated with the introduced high defect TiO 2 lattice. Furthermore, the fabricated specimens’ obtained findings may be applied as possible candidates for high-energy storage devices. Moreover, proper for the manufacture of materials working at a higher frequency.

The effect of reducing oxygen in glass network on the electrical conductivity of system 50 B 2 O 3 − 20 Pb 3 O 4 − 10 Co 3 O 4 − (20 − x )CaO − x CaCl 2 (0 ≤ x ≤ 20 mol%) has thoroughly been investigated. This reduction was created by substituting oxygen ions with chloride ions. The measurements were conducted in the temperature range 320–560 K for fixed frequencies 0.1, 1, 10 and 100 kHz. It was found that at low temperatures, the dc conductivity ( σ dc ) is lower than the measured ac conductivity σ ( ω ), whereas σ ( ω ) and σ dc became equal at high temperature for all frequencies. The ac, dc conductivity as well as dc activation energies decrease with the gradual increase of CaCl 2 content. The ac conductivity and the frequency exponent data showed that the correlated barrier hopping of electrons between both of oxidation states of cobalt ions (Co 2+ and Co 3+ ) is the most probable mechanism. The dielectric constant and the dielectric loss of the present glass system can be fitted to the Cole–Cole equation for all frequencies and temperatures.

The approximate analytical solutions are obtained for adiabatic and isothermal flows behind a cylindrical shock wave in a dusty gas. A mixture of perfect gas and micro size small inert solid particles is taken as the dusty gas. The inert solid particles are distributed continuously in the mixture. It is considered that the equilibrium flow conditions are maintained. The flow variables are expanded in power series to obtain the solution of the problem. The analytical solutions are obtained for the first order approximation in both the adiabatic and isothermal cases. Also, the system of ordinary differential equations for second order approximations to the solution is obtained. The influence of an increase in the ratio of the density of the inert solid particles to the initial density of the perfect gas, the rotational parameter and the mass concentration of inert solid particles in the mixture are discussed on the flow variables for first approximation. Our first approximation to the solution corresponds to the Taylor’s solution for the creation of a blast wave by a strong explosion. A comparison is also made between the solutions for isothermal and adiabatic flows. It is investigated that the density and pressure near the line of symmetry in the case of isothermal flow become zero and hence a vacuum is formed at the axis of symmetry when the flow is isothermal. Also, it is found that an increase in the value of rotational parameter or the mass concentration of solid particles in the mixture has a decaying effect on shock wave. The present work may be used to verify the correctness of the solution obtained by self-similarity and numerical methods.