Article
Licensed
Unlicensed
Requires Authentication
The influence of thickeners on the surface structure of coatings evaluated by AFM and pair distribution function analysis
Relationship between surface structure, colloidal stability and viscosity
-
Alexandra Wallström
Published/Copyright:
July 19, 2018
Published Online: 2018-07-19
Published in Print: 2005-12-01
© 2018 by Walter de Gruyter Berlin/Boston
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Evaluation of PFI beating on the strain to failure of spruce fibres using single fibre fragmentation
- Alternative models for describing the acid/base properties of bleached softwood fibres
- The state and spatial distribution of extractives during birch kraft pulping, as evaluated by staining techniques
- Analysis of strains in the fracture process zone
- Rheology and surface tension of water-based flexographic inks and implications for wetting of PE-coated board
- Influence of formulation and properties of water-based flexographic inks on printing performance for PE-coated board
- From wood shavings to mechanical pulp – a new raw material?
- A novel method for studying ink penetration of a print
- The effect of di(oleamidoethyl)ammonium salt addition at the wet-end on drainage and sheet properties
- Influence of birch xylan adsorption during kraft cooking on softwood pulp strength
- Chemical pulp refining for optimum combination of dewatering and tensile strength
- On the role of carbohydrates in oxygen delignification
- Spreading and adhesion of ASA on different surfaces present in paper machines
- High-speed measurements of pressure and temperature in the refining zone of a high-consistency refiner
- Refining zone pressure in a mill-scale TMP refiner measured by fibre-optic sensors
- Direct organic acid-catalyzed polyester derivatization of lignocellulosic material
- The influence of thickeners on the surface structure of coatings evaluated by AFM and pair distribution function analysis
- Quantification method for hydrogen peroxide formation during oxygen delignification of kraft pulp
- Water- and oil-penetration resistances of handsheets prepared by internal addition of diperfluoroalkylethyl phosphate: Influence of cationic polymers co-added
- EFFECT OF REFINING INTENSITY ON PRESSURE SCREEN FRACTIONATED SOFTWOOD KRAFT
- ANNUAL INDEX FOR 2005
Keywords for this article
Rheology;
Surface structure;
Coating;
Pair distribution function;
Atomic force microscopy;
Thickening agent
Articles in the same Issue
- Evaluation of PFI beating on the strain to failure of spruce fibres using single fibre fragmentation
- Alternative models for describing the acid/base properties of bleached softwood fibres
- The state and spatial distribution of extractives during birch kraft pulping, as evaluated by staining techniques
- Analysis of strains in the fracture process zone
- Rheology and surface tension of water-based flexographic inks and implications for wetting of PE-coated board
- Influence of formulation and properties of water-based flexographic inks on printing performance for PE-coated board
- From wood shavings to mechanical pulp – a new raw material?
- A novel method for studying ink penetration of a print
- The effect of di(oleamidoethyl)ammonium salt addition at the wet-end on drainage and sheet properties
- Influence of birch xylan adsorption during kraft cooking on softwood pulp strength
- Chemical pulp refining for optimum combination of dewatering and tensile strength
- On the role of carbohydrates in oxygen delignification
- Spreading and adhesion of ASA on different surfaces present in paper machines
- High-speed measurements of pressure and temperature in the refining zone of a high-consistency refiner
- Refining zone pressure in a mill-scale TMP refiner measured by fibre-optic sensors
- Direct organic acid-catalyzed polyester derivatization of lignocellulosic material
- The influence of thickeners on the surface structure of coatings evaluated by AFM and pair distribution function analysis
- Quantification method for hydrogen peroxide formation during oxygen delignification of kraft pulp
- Water- and oil-penetration resistances of handsheets prepared by internal addition of diperfluoroalkylethyl phosphate: Influence of cationic polymers co-added
- EFFECT OF REFINING INTENSITY ON PRESSURE SCREEN FRACTIONATED SOFTWOOD KRAFT
- ANNUAL INDEX FOR 2005
