Article
Licensed
Unlicensed
Requires Authentication
How formation should be measured and characterized
-
Isko M. Kajanto
Published/Copyright:
July 19, 2018
Published Online: 2018-07-19
Published in Print: 1989-08-01
© 2018 by Walter de Gruyter Berlin/Boston
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Treatment of C-stage and E-stage bleaching plant effluent by ultrafiltration
- The wood extractives in alkaline peroxide bleaching of groundwood from Norway spruce
- Closed-cycle recovery and combustion of bleachery filtrate
- Color changes in lignin-rich pulps on irradiation by light
- Bond setting in the corrugating operation
- Analysis of lignins by 1H NMR spectroscopy
- Normal forces in coating colors and their importance for blade coating
- How formation should be measured and characterized
- Erratum to
Keywords for this article
Formation;
Radiography;
Images;
Image analy-sis;
Opacity;
Mechanical properties;
Strength;
Formation testers;
Formation measurements
Articles in the same Issue
- Treatment of C-stage and E-stage bleaching plant effluent by ultrafiltration
- The wood extractives in alkaline peroxide bleaching of groundwood from Norway spruce
- Closed-cycle recovery and combustion of bleachery filtrate
- Color changes in lignin-rich pulps on irradiation by light
- Bond setting in the corrugating operation
- Analysis of lignins by 1H NMR spectroscopy
- Normal forces in coating colors and their importance for blade coating
- How formation should be measured and characterized
- Erratum to
