Startseite Effect of the particle size on the mechanical properties of 60 vol.% SiCp reinforced Al matrix composites
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Effect of the particle size on the mechanical properties of 60 vol.% SiCp reinforced Al matrix composites

  • H. Ahlatci , E. Candan und H. Çimenoğlu EMAIL logo
Veröffentlicht/Copyright: 4. Januar 2022
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 93 Heft 4

Abstract

The effect of the reinforcing particle size on the mechanical properties of 60 vol.% SiC reinforced aluminium matrix composites produced by the pressure infiltration technique was examined by compression, impact and wear tests. The compression strength and the impact resistance decreased with increasing reinforcing particle size. The composites exhibited different abrasion behaviour depending on the size of abrasive Al2O3 grains. On fine abrasive Al2O3 grains (85 μm), the abrasion resistance increased with increasing reinforcing SiC particle size. The contrary result was obtained on coarse abrasive Al2O3 grains (250 μm). The wear tests conducted on M2 quality tool steel revealed that reinforcing of aluminium with coarse SiC particles has a very beneficial effect on the wear resistance with respect to fine reinforcing SiC particles.

Keywords: Aluminium; Composite; Infiltration; SiC; Wear
Prof. Dr. H. Çimenoğlu Istanbul Technical University Metallurgy and Materials Engineering Department 80626 Maslak, Istanbul, Turkey Tel.: +90 212 285 6834 Fax: +90 212 285 3427

References

1 Eliassen, J.; Sandström, R.: Key Eng. Mater. 104–106 (1995) 3.10.4028/www.scientific.net/KEM.104-107.3Suche in Google Scholar

2 Wang, A.G.; Hutchings, I.M.: Mater. Sci. Technol. 5 (1989) 71.10.1179/mst.1989.5.1.71Suche in Google Scholar

3 Alpas, A.T.; Zhang, J.: Scripta Metall. Mater. 26 (1992) 505.10.1016/0956-716X(92)90638-USuche in Google Scholar

4 Alpas, A.T.; Zhang, J.: Wear 155 (1992) 83.10.1016/0043-1648(92)90111-KSuche in Google Scholar

5 Pramila Bai, B.N.; Ramasesh, B.S.; Surappa, M.K.: Wear 157 (1992) 295.10.1016/0043-1648(92)90068-JSuche in Google Scholar

6 Modi, O.P.; Prasad, B.K.; Yegnewaran, A.H.; Vaidya, M.L.: Mater. Sci. Eng. A 151 (1992) 235.10.1016/0921-5093(92)90212-JSuche in Google Scholar

7 Alpas, A.T.; Zhang, J.: Metall. Trans. A 25 (1994) 969.10.1007/BF02652272Suche in Google Scholar

8 Hutchings, I.M.: Mater. Sci. Technol. 10 (1994) 513.10.1179/mst.1994.10.6.513Suche in Google Scholar

9 Axen, N.; Jacobson, S.: Wear 178 (1994) 1.10.1016/0043-1648(94)90124-4Suche in Google Scholar

10 Axen, N.; Alahelisten, A.; Jacobson, S.: Wear 173 (1994) 95.10.1016/0043-1648(94)90261-5Suche in Google Scholar

11 Gurcan, A.B.; Baker, T.N.: Wear 188 (1995) 185.10.1016/0043-1648(95)06639-XSuche in Google Scholar

12 Song, W.Q.; Krauklis, P.; Mouritz, A.P.; Bandyopadhyay, S.:Wear 185 (1995) 125.10.1016/0043-1648(95)06599-7Suche in Google Scholar

13 Liang, Y.N.; Ma, Z.Y.; Li, S.Z.; Li, S.; Bi, J.: J. Mater. Sci. Lett. 14 (1995) 114.10.1007/BF00456563Suche in Google Scholar

14 Zhang, Z.; Zhang, L.; Mai, Y.W.: J. Mater. Sci. 30 (1995) 5999.10.1007/BF01151519Suche in Google Scholar

15 Sheu, C.-Y.; Lin, S.-J.: Scripta Metall. Mater. 35 (1996) 1271.10.1016/1359-6462(96)00291-6Suche in Google Scholar

16 Bai, M.; Xue, Q.; Guo, H.: Wear 194 (1996) 126.10.1016/0043-1648(95)06820-1Suche in Google Scholar

17 Ma, Z.Y.; Liang, Y.N.; Zhang, Y.Z.; Lu, Y.X.; Bi, J.: Mater. Sci. Technol. 12 (1996) 751.10.1179/mst.1996.12.9.751Suche in Google Scholar

18 Ravikiran, A.; Surappa, M.K.: Wear 206 (1997) 33.10.1016/S0043-1648(96)07341-3Suche in Google Scholar

19 Wilson, S.; Alpas, A.T.: Wear 212 (1997) 41.10.1016/S0043-1648(97)00142-7Suche in Google Scholar

20 Al Rubaie, K.S.; Yashimura, H.N.; Biasali de Mello, J.D.: Wear 233–235 (1999) 444.10.1016/S0043-1648(99)00185-4Suche in Google Scholar

21 Long, S.; Beffort, O.; Cayron, C.; Bonjour, C.: Mater. Sci. Eng. A 269 (1999) 175.10.1016/S0921-5093(99)00163-XSuche in Google Scholar

22 Li, X.Y.; Tandon, K.N.: Wear 245 (2000) 148.10.1016/S0043-1648(00)00475-0Suche in Google Scholar

23 Candan, E.; Ahlatci, H.; Çimenoğlu, H.: Wear 247 (2001) 133.10.1016/S0043-1648(00)00499-3Suche in Google Scholar

24 Yang, Y.; Cady, C.; Hu, M.S.; Zok, F.; Mehrabian, R.; Evans, A.G.: Acta Metall. Mater. 38 (1990) 2613.10.1016/0956-7151(90)90273-JSuche in Google Scholar

25 Hu, M.S.: Scripta Metall. Mater. 25 (1991) 695.10.1016/0956-716X(91)90117-JSuche in Google Scholar

26 Arsenault, R.J.; Wang, L.; Feng, C.R.: Acta Metall. Mater. 39 (1991) 47.10.1016/0956-7151(91)90327-WSuche in Google Scholar

27 Hunt, Jr., W.H.; Brockenbrough, J.R.; Magnusen, P.E.: Scripta Metall. Mater. 25 (1991) 15.10.1016/0956-716X(91)90346-3Suche in Google Scholar

28 Weng, B.J.; Chang, S.T.; Shiau, J.S.: Scripta Metall. Mater. 27 (1992) 1127.10.1016/0956-716X(92)90586-4Suche in Google Scholar

29 Jiang, J.; Dodd, B.: Composites 26 (1995) 62.10.1016/0010-4361(94)P3631-ASuche in Google Scholar

30 Davidson, A.M.; Regener, D.: Composites Sci. Technol. 60 (2000) 865.10.1016/S0266-3538(99)00151-7Suche in Google Scholar

31 Flom, Y.; Arsenault, R.J.: Acta Metall. Mater. 37 (1989) 2413.10.1016/0001-6160(89)90039-4Suche in Google Scholar

32 Brechet, Y.; Embury, J.D.; Tao, S.; Luo, L.; Acta Metall. Mater. 39 (1991) 17781.Suche in Google Scholar

33 Hunt, Jr., W.H.; Osman, T.M.; Lewandowski, J.J.: JOM 45 (1993) 30.10.1007/BF03223363Suche in Google Scholar

34 Arikan, M.M.; Çimenoğlu, H.; Kayali, E.S.:Wear 247 (2001) 231.10.1016/S0043-1648(00)00523-8Suche in Google Scholar

35 Sun, Y.; Baydoğan, M.; Çimenoğlu, H.. Mater. Lett. 38 (1999) 221.10.1016/S0167-577X(98)00162-1Suche in Google Scholar

36 Candan, E.; Atkinson, H.V.; Jones, H.: Scripta Metall. Mater. 38 2(1998) 999.10.1016/S1359-6462(97)00553-8Suche in Google Scholar
Received: 2001-07-27
Published Online: 2022-01-04

© 2002 Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Frontmatter
  2. Articles/Aufsätze
  3. 59Fe Grain boundary diffusion in nanostructured γ-Fe–Ni
  4. 59Fe Grain boundary diffusion in nanostructured γ-Fe–Ni
  5. Thermodynamic assessment of the Cu–Ti system taking into account the new stable phase CuTi3
  6. Thermodynamic assessment of the Pd–Sc system
  7. Heat content of liquid Fe –Cu–Si alloys formed in the melting treatment process of domestic waste incineration residue
  8. A model of viscosity for liquid metals
  9. Umwandlungswärme einer NiTi-Gedächtnislegierung unter Last
  10. Study of magnetic properties of Ni –Fe –P and Ni –Fe –P–B chemical films
  11. Geometrical modelling of a crystal grain in a weld of ferritic stainless steel
  12. Welding of heat-resistant 20% Cr – 5% Al steels
  13. Finite element analysis of γ′ directional coarsening in Ni-based superalloys
  14. Quantitative analysis of aluminium alloys using SIMS
  15. Effect of the particle size on the mechanical properties of 60 vol.% SiCp reinforced Al matrix composites
  16. Notifications/Mitteilungen
  17. Personal/Personelles
https://doi.org/10.3139/ijmr-2002-0060
Schlagwörter für diesen Artikel
Aluminium; Composite; Infiltration; SiC; Wear

Artikel in diesem Heft

  1. Frontmatter
  2. Articles/Aufsätze
  3. 59Fe Grain boundary diffusion in nanostructured γ-Fe–Ni
  4. 59Fe Grain boundary diffusion in nanostructured γ-Fe–Ni
  5. Thermodynamic assessment of the Cu–Ti system taking into account the new stable phase CuTi3
  6. Thermodynamic assessment of the Pd–Sc system
  7. Heat content of liquid Fe –Cu–Si alloys formed in the melting treatment process of domestic waste incineration residue
  8. A model of viscosity for liquid metals
  9. Umwandlungswärme einer NiTi-Gedächtnislegierung unter Last
  10. Study of magnetic properties of Ni –Fe –P and Ni –Fe –P–B chemical films
  11. Geometrical modelling of a crystal grain in a weld of ferritic stainless steel
  12. Welding of heat-resistant 20% Cr – 5% Al steels
  13. Finite element analysis of γ′ directional coarsening in Ni-based superalloys
  14. Quantitative analysis of aluminium alloys using SIMS
  15. Effect of the particle size on the mechanical properties of 60 vol.% SiCp reinforced Al matrix composites
  16. Notifications/Mitteilungen
  17. Personal/Personelles
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 17.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/ijmr-2002-0060/pdf?lang=de
Button zum nach oben scrollen