Contents

Articles in the same Issue

1. Contents
2. Contents
3. Editorial
4. First in a Series: Pioneers of Polymer Processing: Thomas Hancock – The First Polymer Processing Innovator
5. Mixing
6. The Extensional Flow Mixer, EFM
7. Reactive Extrusion
8. Continuous Polymerization of Caprolactam-Polyether Sulfone Solutions in a Twin Screw Extruder to Form Reactive Polyamide–6/Polyether Sulfone Blends and Their Melt Spun Fibers
9. Biodegradable Poly(Lactic Acid) with High Molecular Weight
10. Acceleration of Chemical Reaction in Reactive Extrusion Accompained by Devolatilization
11. Fibers and Films
12. Viscous-Elastic Effects in a PA 6 Melt – Cause of Unevennesses in Melt-Spun Yarns**
13. Gear Pump Performance in Polypropylene Filament Yarn Uniformity
14. Molding
15. Physically-Based Model of Thermoplastics Injection Molding for Control Applications
16. Effect of Pressure and Shear Stress on Crystallization Behaviors in Injection Molding
17. The Crystallinity of PVC and its Effect on Physical Properties**
18. Molecular Orientation in Polycarbonate Induced by Cooling Stresses