Home Physical Sciences Fifteenth in a Series: Ikegai Corporation: From Engine Lathes to Twin Screw Extruders
Article
Licensed
Unlicensed Requires Authentication

Fifteenth in a Series: Ikegai Corporation: From Engine Lathes to Twin Screw Extruders

  • James L. White
Published/Copyright: May 28, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 10 Issue 3

Published Online: 2013-05-28
Published in Print: 1995-09-01

© 1995, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Fifteenth in a Series: Ikegai Corporation: From Engine Lathes to Twin Screw Extruders
  5. Die Extrusion
  6. Analysis of Polymer Flow through Coathanger Melt Distributors
  7. Viscosity and the Formation of Die Drool at the Polymer-Metal Interfaces
  8. Flow Implications in the Processing of Tetrafluoroethylene/Hexafluoropropylene Copolymers
  9. Reactive Processing
  10. Thermal/Peroxide Induced Degradation and Maleation of Polypropylene by Reactive Extrusion
  11. Fibers and Films
  12. Biaxially Oriented Polyethylene Films by Compression of Injection Moldings
  13. Tubular Film Blowing
  14. Tubular Film Blowing
  15. Molding
  16. Elastic Calculation of Residual Stresses in Injection Molding
  17. On the Limitations of Shear Induced Crystallization in Polypropylene Melts
  18. Structure and Properties of Injection Moldings of β-Crystal Nucleator-Added Polypropylene
  19. Study on the Performance of Cooling Systems in Precision Injection Molds
  20. Measurement of Planar Orientation of Fibers for Reinforced Thermoplastics Using Image Processing
  21. Welding
  22. Dynamics and Structure Development in Spin Welding of Polyvinylidene Fluoride Cylindrical Rods
https://doi.org/10.3139/217.950194

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Fifteenth in a Series: Ikegai Corporation: From Engine Lathes to Twin Screw Extruders
  5. Die Extrusion
  6. Analysis of Polymer Flow through Coathanger Melt Distributors
  7. Viscosity and the Formation of Die Drool at the Polymer-Metal Interfaces
  8. Flow Implications in the Processing of Tetrafluoroethylene/Hexafluoropropylene Copolymers
  9. Reactive Processing
  10. Thermal/Peroxide Induced Degradation and Maleation of Polypropylene by Reactive Extrusion
  11. Fibers and Films
  12. Biaxially Oriented Polyethylene Films by Compression of Injection Moldings
  13. Tubular Film Blowing
  14. Tubular Film Blowing
  15. Molding
  16. Elastic Calculation of Residual Stresses in Injection Molding
  17. On the Limitations of Shear Induced Crystallization in Polypropylene Melts
  18. Structure and Properties of Injection Moldings of β-Crystal Nucleator-Added Polypropylene
  19. Study on the Performance of Cooling Systems in Precision Injection Molds
  20. Measurement of Planar Orientation of Fibers for Reinforced Thermoplastics Using Image Processing
  21. Welding
  22. Dynamics and Structure Development in Spin Welding of Polyvinylidene Fluoride Cylindrical Rods
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2026 De Gruyter Brill
Downloaded on 16.2.2026 from https://www.degruyterbrill.com/document/doi/10.3139/217.950194/html
Scroll to top button