Article
Licensed
Unlicensed
Requires Authentication
Mixing Ring
-
A. J. Ingen-Housz
Published/Copyright:
May 28, 2013
Abstract
A new mixing device, to be mounted on the tip of a single screw extruder, is equipped with a freely rotating ring. Its homogenising action is clearly understood and explained. In order to understand its dispersing action experiments have been performed in order to find proof of the presence of elongational flow. They regard visualisation of the flow in a transparent model and blending of PS into PE with various viscosity ratios. Aspects of design and applications are discussed.
Received: 1994-7-28
Accepted: 1994-12-5
Published Online: 2013-05-28
Published in Print: 1995-05-01
© 1995, Carl Hanser Verlag, Munich
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Contents
- Contents
- Editorial
- Fourteenth in a Series: Pomini SpA: Dynamic International Machinery Manufacturer
- Internal Mixers
- Non-isothermal Dispersive Flow of a Rubber Mixture Inside an Internal Rotor Mixer
- Screw Extrusion/Continuous Mixing
- Solids Conveying and Melting in a Starve Fed Self-wiping Co-rotating Twin Screw Extruder
- Modeling the Residence Time Distribution of a Non-Intermeshing Twin Screw Extruder
- Mixing Ring
- Morphology in Blends of a Thermotropic Liquid Crystalline Polymer and Polypropylene
- Die Extrusion
- Mechanical Effects in Extrusion: Slit Dies
- Fibers and Films
- Relationship of Stresses in Blown-film Processes
- Molding
- Modelling and Experiments of Squeezing Flow of Polymer Melts
- Crystallization Behavior of Carbon Fiber Reinforced Polyamides (I) Dynamic and Isothermal Crystallization
- Structures and Properties of Injection Moldings of β-Crystal Nucleator-Added Polypropylenes
- Forging
- Numerical Simulation of Polymer Forging
- Rapid Communication of Recent Advances
- Unstable Gas Penetrations in Symmetrical Rib Channels During Gas-assisted Injection Molding
Articles in the same Issue
- Contents
- Contents
- Editorial
- Fourteenth in a Series: Pomini SpA: Dynamic International Machinery Manufacturer
- Internal Mixers
- Non-isothermal Dispersive Flow of a Rubber Mixture Inside an Internal Rotor Mixer
- Screw Extrusion/Continuous Mixing
- Solids Conveying and Melting in a Starve Fed Self-wiping Co-rotating Twin Screw Extruder
- Modeling the Residence Time Distribution of a Non-Intermeshing Twin Screw Extruder
- Mixing Ring
- Morphology in Blends of a Thermotropic Liquid Crystalline Polymer and Polypropylene
- Die Extrusion
- Mechanical Effects in Extrusion: Slit Dies
- Fibers and Films
- Relationship of Stresses in Blown-film Processes
- Molding
- Modelling and Experiments of Squeezing Flow of Polymer Melts
- Crystallization Behavior of Carbon Fiber Reinforced Polyamides (I) Dynamic and Isothermal Crystallization
- Structures and Properties of Injection Moldings of β-Crystal Nucleator-Added Polypropylenes
- Forging
- Numerical Simulation of Polymer Forging
- Rapid Communication of Recent Advances
- Unstable Gas Penetrations in Symmetrical Rib Channels During Gas-assisted Injection Molding
