Influence of ABS Type and Compatibilizer on the Thermal and Mechanical Properties of PC/ABS Blends

References

Balakrishanan, S., Neelakantan, N. R., “Mechanical Properties of Blends of Polycarbonate with Unmodified and Maleic Anhydride Grafted ABS”, Polym. Int., 45, 347–352 (1998) 10.1002/(SICI)1097-0126(199804)45:4<347::AID-PI940>3.0.CO;2-RSearch in Google Scholar

Balakrishanan, S., Neelakantana, N. R., Sahebb, N. D. and Jog, J. P., “Rheological and Morphological Behaviour of Blends of Polycarbonate with Unmodified and Maleic Anhydride Grafted ABS”, Polymer, 39, 5765–5771 (1998) 10.1016/S0032-3861(98)00088-3Search in Google Scholar

Balart, R., López, J., García, D. and Salvador, M. D., “Recycling of ABS and PC from Electrical and Electronic Waste. Effect of Miscibility and Previous Degradation on Final Performance of Industrial Blends”, Eur. Polym. J., 41, 2150–2160 (2005) 10.1016/j.eurpolymj.2005.04.001Search in Google Scholar

Baltá-Calleja, F. J., “Microhardness Relating to Crystalline Polymers”, Adv. Polym. Sci., 66, 66, 117 (1985) 10.1007/3-540-13779-3_19Search in Google Scholar

Borah, J. S., ChakiT. K., “Dynamic Rheological, Morphology and Mechanical Properties of Compatibilized LLDPE/EMA Blends”, J. Polym. Res., 18, 907–916 (2011) 10.1007/s10965-010-9488-zSearch in Google Scholar

Chen, B., Tang, T., Li, X., Xu, S., Zhang, X. and Huang, B., “Morphology, Tensile Strength and Thermal Behavior of Isotactic Polypropylene/Syndiotactic Polystyrene Blends Compatibilized by SEBS Copolymers”, Polym. J., 36, 284–293 (2004) 10.1295/polymj.36.284Search in Google Scholar

Chiang, C. R., Tseng, C.-R. and Chang, F.-C., “Polymer Blends of PA6 and PPE Compatibilized by. Phenolic Novolac Epoxy Coupler”, J. Polym. Res., 4, 91–99 (1997) 10.1007/s10965-006-0012-4Search in Google Scholar

Chiang, W.-Y., Tzeng, G.-L., “Effect of the Compatibilizers on Flame-Retardant Polycarbonate (PC)/Acrylonitrile–Butadiene–Styrene (ABS) Alloy”, J. Appl. Polym. Sci., 65, 795–805 (1997) 10.1002/(SICI)1097-4628(19970725)65:4<795::AID-APP17>3.0.CO;2-SSearch in Google Scholar

Cho, C. G., Park, T. H. and Kim, Y. S., “Interfacial Enrichment of a Compatibilizing Graft Copolymer in a Partially Miscible Polymer Blend”, Polymer, 38, 4687–4696 (1997) 10.1016/S0032-3861(96)01073-7Search in Google Scholar

Choi, H. J., Park, S. H., Kim, J. K. and Jun, J. I., “Effects of Acrylonitrile Content on PC/ABS Alloy Systems with a Flame Retardant”, J. Appl. Polym. Sci., 75, 417–423 (2000) 10.1002/(SICI)1097-4628(20000118)75:3<417::AID-APP11>3.0.CO;2–4Search in Google Scholar

Choi, K. J., Lee, G. H., Ahn, S. J., Shon, K. H., Kim, I. and JeongH. M., “Compatibilizing Effect of Poly(methyl methacrylate) in Polycarbonate/Poly(acrylonitrile-co-butadiene-co-styrene) Blend”, J. Appl. Polym. Sci., 59, 557–560 (1996) 10.1002/(SICI)1097-4628(19960118)59:3<557::AID-APP22>3.0.CO;2-PSearch in Google Scholar

Chun, J. H., Maeng, K. S. and Suh, K. S., “Miscibility and synergistic Effect of Impact Strength in Polycarbonate/ABS Blends”, J. Mater. Sci., 26, 5347–5352 (1991) 10.1007/BF01143232Search in Google Scholar

Costa, L. C., Ambrosio, J. D., Chinelatto, M. A. and Hage, E., “Development of Phase Morphology in Immiscible Poly(styrene-co-acrylonitrile)/Poly(butylene terephthalate) Nanoblends: Mechanical Properties and Effect of the Compatibilizer”, J. Appl. Polym. Sci., 134, 45030–45038 (2017) 10.1002/app.45030Search in Google Scholar

Dai, P.-B., Meng, F.-D., Wang, X.-L. and Wang, Y.-Z., “Effect of an Ultrahigh Rubber ABS Impact Modifier Resin on Mechanical Properties of Intumescent Flame-Retardant ABS Composites”, J. Macromol. Sci., Part B, Phys., 49, 542–551 (2010) 10.1080/00222341003591484Search in Google Scholar

Debbah, I., Krache, R., Aranburu, N., Fernández, M. and Etxeberria, A., “Effect of SEBS-g-MAH Addition on the Mechanical, Rheological, and Morphological Properties of Polycarbonate/Acrylonitrile–Butadiene–Styrene Blends”, J. Elastomers Plast., 50, 611–633 (2018) 10.1177/0095244317753652Search in Google Scholar

Dewi, R., Indrajati, I. N. and Nurhajati, D. W., “Effect of Compatibilizer on the Mechanical and Morphological Properties of Polycarbonate/Poly(acrylonitrile-butadiene-styrene) Blends”, Mater. Sci. Eng., 432 (2018) 10.1088/1757-899X/432/1/012039Search in Google Scholar

Duan, H., Xin, M. Q., Kim, K. Y. and Tang, J. J., “The Role of Compatibilizers on the Properties of PC/ABS Alloy”, J. Mater. Sci. Chem. Eng., 5, 21–30 (2017), 10.4236/msce.2017.56003 10.4236/msce.2017.56003Search in Google Scholar

Farzadfar, A., Khorasani, S. N., “Effect of EVA-g-MAH on Mechanical Properties of PC/ABS Blends”, Polym. Plast. Technol. Eng., 51, 1424–1426 (2012) 10.1080/03602559.2012.706863   Search in Google Scholar

Farzadfar, A., Khorasani, S. N. and Khalili, S., “Blends of Recycled Polycarbonate and Acrylonitrile–Butadiene–Styrene: Comparing the Effect of Reactive Compatibilizers on Mechanical and Morphological Properties”, Polym. Int., 63, 145–150 (2014) 10.1002/pi.4493Search in Google Scholar

Greco, R., Astarita, M. F., Dong, L. and Sorrentino, A., “Polycarbonate/ABS Blends: Processability, Thermal Properties, and Mechanical and Impact Behavior”, Adv. Polym. Technol., 13, 259–274 (1994) 10.1002/adv.1994.060130402Search in Google Scholar

Greco, R., Iavarone, M., “Influence of Low Molecular Weight ABS Species on Properties of PC/ABS Systems”, Polym. Eng. Sci., 40, 1701–1715 (2000) 10.1002/pen.11302Search in Google Scholar

Guest, M. J., Daly, J. H., “The use of Glass Transition Data for Characterizing Polycarbonate Based Blends”, Eur. Polym. J., 25, 985 (1989) 10.1016/0014-3057(89)90124-9Search in Google Scholar

Haghighi-Yazdi, M., Tang, J. K. Y. and Lee-Sullivan, P., “Moisture Uptake of a Polycarbonate Blend Exposed to Hygrothermal Aging”, Polym. Degrad. Stab., 96, 1858–1865 (2011) 10.1016/j.polymdegradstab.2011.07.007Search in Google Scholar

Hanafy, G. M., Samy, A., Madbouly, S. A., Ougizawaa, T. and Inoue, T., “Effects of AN-Contents and Shear flow on the Miscibility of PC/SAN Blends”, Polymer, 45, 6879–6887 (2004) 10.1016/j.polymer.2004.08.014Search in Google Scholar

Herpels, J. J., Mascia, L., “Effects of Styrene Acrylonitrile/Butadiene Ratio on the Toughness of Polycarbonate/ABS Blends”, Eur. Polym. J., 26, 997–1003 (1990) 10.1016/0014-3057(90)90114-JSearch in Google Scholar

Hong, J. H., Song, K. H., Lee, H. G., HanM. S., Kim, Y. H. and Kim, W. N., “Morphological, Mechanical and Rheological Properties of Poly(acrylonitrile-butadiene styrene)/Polycarbonate/Poly(∊-caprolactone) ternary blends”, Macromol. Res., 15, 520–526 (2007a) 10.1007/BF03218825Search in Google Scholar

Hong, J. H., Sung, Y.-T., Song, K. H., Kim, W. N., Kang, B. I., Kim, S. L. and Lee, C. H., “Morphology and Dynamic Mechanical Properties of Poly(acrylonitrile-butadiene-styrene)/Polycarbonate/Claynanocomposites Prepared by Melt Mixing”, Compos. Interfaces, 14, 519–532 (2007b) 10.1163/156855407781291290Search in Google Scholar

Hu, B., Ni, X., “The Properties of Sepiolite Nanofibers Reinforced Polycarbonate/Poly(acrylonitrile-butadiene-styrene) Composites Using a PS-co-MAH Compatibilizer”, Polym.-Plast. Techn. Eng., 53, 1434–1441 (2014) 10.1080/03602559.2014.909478Search in Google Scholar

Huang, J. C., Wang, M. S., “Recent Advance in ABS/PC Blends”, Adv. Polym. Technol., 9, 293–299 (1989) 10.1002/adv.1989.060090403Search in Google Scholar

Ishikawa, M., “Stability of Plastic Deformation and Toughness of Polycarbonate Blended with Poly(acrylonitriIe-butadiene-styrene) Copolymer”, Polymer, 36, 2203–2210 (1995) 10.1016/0032-3861(95)95297-ESearch in Google Scholar

Janarthanan, V., Stein, R. S. and Garrett, P. D., “Effects of oligomers and acrylonitrile content on the interfacial adhesion between PC and SAN”, J. Polym. Sci. Part B Polym. Phys., 31, 1995–2001 (1993) 10.1002/polb.1993.090311312Search in Google Scholar

Jin, D. W., Shon, K. H., Jeong, H. M. and Kim, B. K., “Compatibility Enhancement of ABS/Polycarbonate Blends”, J. Appl. Polym. Sci., 69, 533–542 (1998) 10.1002/(SICI)1097-4628(19980718)69:3<533::AID-APP13>3.0.CO;2-USearch in Google Scholar

Jung, W. H., Choi, Y. S., Moon, J. M., Tortorrela, N., Beatty, C. L. and Lee, J.-O., “Reactive Processing of Recycled Polycarbonate/Acrylonitrile Butadiene Styrene”, Environ. Sci. Technol., 43, 2563–2568 (2009) PMid:19452917; 10.1021/es803355tSearch in Google Scholar

Keitz, J. D., Barlow, J. W. and Paul, D. R., “Polycarbonate Blends with Styrene/Acrylonitrile Copolymers”, J. Appl. Polym. Sci., 29, 3131–3145 (1984) 10.1002/app.1984.070291016Search in Google Scholar

Kim, W. N., Burns, C. M., “Phase Behavior of Blends of Polycarbonate with Partially Miscible Polymers”, J. Appl. Polym. Sci., 41, 1575–1593 (1990) 10.1002/app.1990.070410718Search in Google Scholar

Krache, R., Debbah, I., “Some Mechanical and Thermal Properties of PC/ABS”, Mater. Sci. Appl., 2, 404–410 (2011) 10.4236/msa.2011.25052Search in Google Scholar

Kuram, E., Ozcelik, B. and Yilmaz, F., “The Effects of Recycling Process on Thermal, Chemical, Rheological, and Mechanical Properties of PC/ABS Binary and PA6/PC/ABS Ternary Blends”, J. Elastomers Plast., 48, 164–181 (2016) 10.1177/0095244315576239Search in Google Scholar

Kuthanova, V., Hausnerova, B., Kitano, T., Lapciková, M. and Sáha, P., “Linear Viscoelastic and Morphological Description of Multiphase Systems Affected by Processing Parameters”, J. Appl. Polym. Sci., 119, 989–999 (2011) 10.1002/app.29487Search in Google Scholar

Lashgari, S., Azar, A. A., Lashgari, S. and Gezaz, S. M., “Properties of Waste-Poly(ethylene terephthalate)/Acrylonitrile Butadiene Styrene Blends Compatibilized with Maleated Acrylonitrile Butadiene Styrene”, J. Vinyl Add. Tech., 16, 246–253 (2010) 10.1002/vnl.20247Search in Google Scholar

Li, S., Tang, R., Jing, B., Dai, W. and Zou, X., “Phase Morphology and Interfacial Characteristics of Polycarbonate/Acrylonitrile-Ethylene-Propylene-Diene-Styrene Blends Compatibilized by Styrene-Maleic Anhydride Copolymers”, J. Appl. Polym. Sci., 132, 42103–42115 (2015) 10.1002/app.42103Search in Google Scholar

Li, J., Wang, X. F., Yang, C., Yang, J., Wang, Y. and Zhang, J., “Toughening Modification of Polycarbonate/Poly(butylene terephthalate) Blends Achieved by Simultaneous Addition of Elastomer Particles and Carbon Nanotubes”, Composites: Part A, 90, 200–210 (2016) 10.1016/j.compositesa.2016.07.006Search in Google Scholar

Lim, J. C., Cho, K. Y. and Park, J. K., “Weld Line Characteristics of PC/ABS Blend II: Effect of Reactive Compatibilizer”, J. Appl. Polym. Sci., 108, 3632–3643 (2008) 10.1002/app.27316Search in Google Scholar

Liu, Y., Li, H., Ding, X., Zhu, J., Zhang, L., Pan, W. and Cai, R., “Effect of the Compatibilizers on Polycarbonate (PC)/Acrylonitrile-Butadiene-Styrene (ABS) Blend”, Am. J. Mater. Res., 1, 48–52 (2014), http://www.aascit.org.journal/ajmrSearch in Google Scholar

Lombardo, B. S., Keskkula, H. and Paul, D. R., “Influence of ABS Type on Morphology and Mechanical Properties of PC/ABS Blends”, J. Appl. Polym. Sci., 54, 1697–1720 (1994) 10.1002/app.1994.070541113Search in Google Scholar

Majumdar, B., Keskkula, H., Paul, D. R. and Harvey, N. G., “Control of the Morphology of Polyamide/Styrene-Acrylonitrile Copolymer Blends via Reactive Compatibilizers”, Polymer, 35, 4263–4279 (1994) 10.1016/0032-3861(94)90082-5Search in Google Scholar

Panda, B., Bhattacharyya, A. R. and Kulkarni, A. R., “Morphology and Dielectric Relaxation Spectroscopy of Ternary Polymer Blends of Polyamide 6, Polypropylene, and Acrylonitrile Butadiene Styrene Copolymer: Influence of Compatibilizer and Multiwall Carbon Nanotubes”, J. Appl. Polym. Sci., 15, 1433–1445 (2013) 10.1002/app.38074Search in Google Scholar

Pietrasanta, Y., Robin, J. J., Torres, N. and Boutevin, B., “Reactive Compatibilization of HDPE/PET Blends by Glycidyl Methacrylate Functionalized Polyolefins”, Macromol. Chem. Phys., 200, 142–149 (1999) 10.1002/(SICI)1521-3935(19990101)200:1<142::AID-MACP142>3.3.CO;2-NSearch in Google Scholar

Quan, Y., Yang, M. S. and Yan, Q., “Studies on Flame-Retardant PC/ABS Multiple-Element Alloy”, Chinese. J. Polym. Sci., 19, 183–187 (2001)Search in Google Scholar

Rafizadeh, M., Morshedian, J., Ghasemi, I. and Bolouri, A., “Experimental Relationship for Impact Strength of PC/ABS Blend Based on the Taguchi Method”, Iran. Polym. J., 14, 881–889 (2005)Search in Google Scholar

Raj, M. M., “Studies on Mechanical Properties of PC – ABS Blends”, Int. J. Appl. Sci. Eng. Res., 3, 512–518 (2014)Search in Google Scholar

Ramesh, V., Manoranjan, B., Mohanty, S. and Nayak, S. K., “Recycling of Engineering Plastics from Waste Electrical and Electronic Equipments: Influence of Virgin Polycarbonate and Impact Modifier on the Final Performance of Blends”, Waste. Manage. Res., 32, 379–388 (2014) PMid:24695435; 10.1177/0734242X14528404Search in Google Scholar

Santana, O., Maspoch, M. L., Martínez, A., “Polycarbonate/Acrylonitrile-Butadiene-Styrene Blends: Miscibility and Interfacial Adhesion”, Polym. Bull., 41, 721–728 (1998) 10.1007/s002890050424Search in Google Scholar

Taheri, S., Nakhlband, E. and Nazockdast, H., “Microstructure and Multiwall Carbon Nanotube Partitioning in Polycarbonate/Acrylonitrile-Butadiene-Styrene/Multiwall Carbon Nanotube Nanocomposites”, Polym. Plast. Techn. Eng., 52, 300–309 (2013) 10.1080/03602559.2012.748807Search in Google Scholar

Tan, Z. Y., Xu, X. F., Sun, S. L., Zhou, C., Ao, Y. H. and Zhang, H. X., “Influence of Rubber Content in ABS in Wide Range on the Mechanical Properties and Morphology of PC/ABS Blends with Different Composition”, Polym. Eng. Sci., 46, 1476–1484 (2006) 10.1002/pen.20584Search in Google Scholar

Tasdemir, M., “Properties of Acrylonitrile–Butadiene–Styrene/Polycarbonate Blends with Styrene–Butadiene–Styrene Block Copolymer”, J. Appl. Polym. Sci., 93, 2521–2527 (2004) 10.1002/app.20708Search in Google Scholar

Tjong, S. C., Meng, Y. Z., “Effect of Reactive Compatibilizers on the Mechanical Properties of Polycarbonate/Poly(acrylonitrile-butadiene-styrene) Blends”, Eur. Polym. J., 36, 123–129 (2000) 10.1016/S0014-3057(99)00044-0Search in Google Scholar

Triantou, M. I., Tarantili, P. A., “Studies on Morphology and Thermomechanical Performance of ABS/PC/Organoclay Hybrids”, Polym. Composites, 35, 1395–1407 (2014) 10.1002/pc.22792Search in Google Scholar

Triantou, M. I., Chatzigiannakis, E. M., Tarantili, P. A. and Andreopoulos, A. G., “Compatibilization Mechanism and Property Improvement of Immiscible Engineering Plastics Blend”, Macromol. Symp., 331–332, 81–88 (2013) 10.1002/masy.201300049Search in Google Scholar

Wang, H., Zhang, Y., Huang, Z., Gao, H., Zhang, Y., Gao, X. and Zhou, H., “Experimental and Modeling Study of the Compressive Behavior of PC/ABS at Low, Moderate and High Strain Rates”, Polym. Test., 56, 115–123 (2016) 10.1016/j.polymertesting.2016.09.027Search in Google Scholar

Wildes, G. S., Harada, T., Keskkula, H., Paul, D. R., Janarthanan, V. and Padwa, A. R., “Synthesis and Characterization of an Amine-Functional SAN for the Compatibilization of PC/ABS Blends”, Polymer, 40, 3069–3082 (1999a) 10.1016/S0032-3861(98)00521-7Search in Google Scholar

Wildes, G., Keskkula, H. and Paul, D. R., “Fracture Characterization of PC/ABS Blends: Effect of Reactive Compatibilization, ABS Type and Rubber Concentration”, Polymer, 40, 7089–7107 (1999b) 10.1016/S0032-3861(98)00865-9Search in Google Scholar

Wong, A. C.-Y., “Polycarbonate Effects on Selected Mechanical Properties of Polycarbonate/Acrylonitrile-Butadiene-Styrene (PC/ABS) Binary Blending Systems”, Polym. Plast. Technol Eng., 42, 171–180 (2003) 10.1081/PPT-120017920Search in Google Scholar

Wu, J. S., Shen, S. C. and Chang, F. C., “Effect of Rubber Content in Acrylonitrile Butadiene Styrene and Additional Rubber on the Polymer Blends of Polycarbonate and Acrylonitrile Butadiene Styrene”, Polym. J., 26, 33–42 (1994) 10.1295/polymj.26.33Search in Google Scholar

Yang, K., Lee, S. H. and Oh, J. M., “Effects of Viscosity Ratio and Compatibilizers on the Morphology and Mechanical Properties of Polycarbonate/Acrylonitrile-Butadiene-Styrene Blends”, Polym. Eng. Sci., 39, 1667–1677 (1999) 10.1002/pen.11561Search in Google Scholar

Yin, Z. N., Fan, L. F. and Wang, T. J., “Experimental Investigation of the Viscoelastic Deformation of PC, ABS and PC/ABS Alloys”, Mater. Lett., 62, 2750–2753 (2008) 10.1016/j.matlet.2008.01.041Search in Google Scholar

Zamfirova, G., Lorenzo, V., Benavente, R. and Pereña, J. M., “On the Relationship between Modulus of Elasticity and Microhardness”, J. Appl. Polym. Sci., 88, 1794–1798 (2003) 10.1002/app.12632Search in Google Scholar

Zhang, A., Zhao, G., Gao, J. and Guan, Y., “Effect of Acrylonitrile Butadiene Styrene High Rubber Powder and Strain Rate on the Morphology and Mechanical Properties of Acrylonitrile Butadiene Styrene/Poly(methacrylate) Blends”, Polym. Plastics Technol. Eng., 49, 296–304 (2010) 10.1080/03602550903413979Search in Google Scholar

Zhang, X., Chen, Y., Zhang, Y., Peng, Z., Zhang, Y. and Zhou, W., “Effects of ABS-g-MAH on Mechanical Properties and Compatibility of ABS/PC Alloy”, J. Appl. Polym. Sci., 81, 831–836 (2001) 10.1002/app.1502Search in Google Scholar

Zhao, B., Wang, Q., Hu, G., Wang, B., Li, Y., Song, J., Wang, Z. and Li, Q. “Effect of Methyl Methacrylate Graft Acrylonitrile–Butadiene-Styrene on Morphology and Properties of Polycarbonate/Acrylonitrile–Butadiene-Styrene Blend”, J. Macromol. Sci. Part B Phys., 51, 2276–2283 (2012) 10.1080/00222348.2012.672839Search in Google Scholar