First in a Series: Polymer Processing in Developing Countries Polymer Processing in Peru

Articles in the same Issue

1. Contents
2. Contents
3. Editorial
4. First in a Series: Polymer Processing in Developing Countries Polymer Processing in Peru
5. Screw Extrusion
6. Modeling and Analysis of Helicoidal Flow in a Conical Extruder
7. A Powerful Universal Plasticating System for Single-screw-extruders and Injection-moulding Machines
8. Cross Channel Flow Velocity and Motion Trajectory of Polymers in a Helical Channel
9. Mixing and Compounding
10. Influence of Low Molecular Weight Additives on Die Extrusion Rheometer Flow of Thermoplastic Melts
11. Design of a Static Temperature Scanning Ultrasonic Measurement System and Application to Multi-phase Polymer Systems
12. Raman Spectroscopy as an On-line Technique to Monitor Shear Flow Effect on Partially Miscible Polymer Blends
13. Reactive Extrusion
14. Flow Effects on Polymer Transesterification
15. A Dynamic Model Accounting for Oscillating Behavior in Reactive Extrusion
16. Study on Functionalization of Isotactic PP with Maleic Anhydride in an Internal Mixer and a Twin-screw Extruder
17. Quality Aspects on the Power Cable Core Insulation Extrusion and Thermal Curing Process
18. Die Extrusion
19. Flow Balancing in Extrusion Dies for Thermoplastic Profiles
20. Flow Balancing in Extrusion Dies for Thermoplastic Profiles
21. Molding
22. On the Residual Stress and Shrinkage in Injection Compression Molding