Seikei-Kakou Abstracts

Artikel in diesem Heft

1. Contents
2. Contents
3. Review Articles
4. Influence of Carbon Fillers on Thermal Properties and Flammability of Polymeric Nanocomposites
5. Regular Contributed Articles
6. Polymer Flow Behavior Analysis Based on Physical Visualization Technology for Ultrasonic Vibration-Assisted Injection Molding
7. Flexural Fatigue Performance of Glass Fiber/Epoxy Step-Wise Functionally and Non-Functionally Graded Composites of Different Structures
8. Establishment and Effect of Constraint on Different Mechanical Properties of Bamboo Filler Reinforced Epoxy Composite
9. Experimental Investigation on Mechanical and Thermo-Mechanical Properties of Alumina Filled Polypropylene Composites Using Injection Molding Process
10. Development and Characterization of Polyurethane and Acrylonitrile Butadiene Styrene and their Compatibilized Blends
11. Mechanical Properties of Polydimethylsiloxane as a Function of the Amount and Type of Crosslinking Agent
12. Numerical Investigation of Effect of Rotor Phase Angle in Partially-Filled Rubber Mixing
13. Method of Calculating the Fluid Permeability of Machined Skin-Covered Porous Sheets from Experimental Flow Data
14. Analysis of Models Predicting Morphology Transitions in Reactive Twin-Screw Extrusion of Bio-Based Polyester/Polyamide Blends
15. A Combined Experimental and Modelling Approach towards an Optimized Heating Strategy in Thermoforming of Thermoplastics Sheets
16. Analyzing the Influence of Surface Renewal on Diffusive Mass Transport in Vented Single-Screw Extruders
17. Research on Optimizing Parameters of Thermal Bonding Technique for PMMA Microfluidic Chip
18. PPS News
19. PPS News
20. Seikei Kakou Abstracts
21. Seikei-Kakou Abstracts