Home Technology Cracks in Hot-Dip Galvanized Steel Components
Article
Licensed
Unlicensed Requires Authentication

Cracks in Hot-Dip Galvanized Steel Components

  • C. Freitag and M. Panzenböck
Published/Copyright: May 29, 2017
Become an author with De Gruyter Brill
Submit Manuscript Author Information
Practical Metallography
From the journal Practical Metallography Volume 54 Issue 6

Abstract

Again and again, components fail due to sudden crack initiation. In the present case, a hot-dip galvanized structural hollow section failed. It was manufactured from unalloyed structural steel of the type S355J0. Hydrogen plays a decisive role in this failure which results from a time-delayed damage of the material.

Kurzfassung

Immer wieder kommt es zum Versagen von Bauteilen durch plötzlich auftretende Rissbildung. Im gegenständlichen Fall kam es zur Schädigung eines feuerverzinkten Stahlbauhohlprofiles, welches aus einem Baustahl vom Typ S355J0 gefertigt wurde. Das Versagen ist auf eine zeitverzögerte Werkstoffschädigung zurückzuführen, wobei der Wasserstoff eine entscheidende Rolle spielt.

Translation: E. Engert

References / Literatur

[1] Nies, H.; Schambil, G.; Stiefel, B.: SVS Schweißtechnik Soudure, 2007, S. 8–11Search in Google Scholar

[2] Stahlbau77, Nr. 1, 2008, S. 62–6310.1002/stab.200890002Search in Google Scholar

[3] Internationale Fachzeitschrift, 40. Jahrgang, Düsseldorf, Nr. 02, 2011Search in Google Scholar

[4] Panzenböck, M.; Mendez-Martin, F.; Rashkova, B.; Schütz, P.; Kaiser, R.: Prakt. Met. Sonderband 47, 2015, S. 203–208Search in Google Scholar

[5] Luithle, A.: Dissertation, Ruhr-UniversitätBochum, 2013Search in Google Scholar

[6] Pohl, M.; Kühn, S.: Materials Testing, 2010, Vol. 52, S. 52–5610.3139/120.110111Search in Google Scholar

Received: 2017-01-24
Accepted: 2017-02-01
Published Online: 2017-05-29
Published in Print: 2017-06-19

© 2017, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents/Inhalt
  2. Contents
  3. Editorial
  4. Editorial
  5. Technical Contributions/Fachbeiträge
  6. The Copper of the Kyffhäuser Monument
  7. Preparing Soft Magnetic Composites for Structural and Micromechanical Investigations
  8. Round Robin Test on the “Analysis of Graphite Shapes by Means of Microscopic Images of Cast Iron Samples” in the DGM Working Group “Quantitative Structural Analysis” of the Expert Committee Materialography
  9. Failure Analysis
  10. Cracks in Hot-Dip Galvanized Steel Components
  11. Meeting Diary/Veranstaltungskalender
  12. Meeting Diary
https://doi.org/10.3139/147.110452

Articles in the same Issue

  1. Contents/Inhalt
  2. Contents
  3. Editorial
  4. Editorial
  5. Technical Contributions/Fachbeiträge
  6. The Copper of the Kyffhäuser Monument
  7. Preparing Soft Magnetic Composites for Structural and Micromechanical Investigations
  8. Round Robin Test on the “Analysis of Graphite Shapes by Means of Microscopic Images of Cast Iron Samples” in the DGM Working Group “Quantitative Structural Analysis” of the Expert Committee Materialography
  9. Failure Analysis
  10. Cracks in Hot-Dip Galvanized Steel Components
  11. Meeting Diary/Veranstaltungskalender
  12. Meeting Diary
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 9.12.2025 from https://www.degruyterbrill.com/document/doi/10.3139/147.110452/pdf
Scroll to top button