Effect of Preparation on the Correct Interpretation of Thermal Spray Coatings on the Basis of Selected Atmospheric Plasma and Flame Spray Coatings
-
S. Schultz
Abstract
For quality assurance, thermal spray coatings undergo, metallographic examination, among other things, Here, for example, unmelted particles, pores, oxides, phase fractions, homogeneity, separations, cracks and impurities are estimated.
The correct evaluation of thermal spray samples is heavily influenced by embedding and preparation methods.
Kurzfassung
Thermische Spritzschichten werden zur Qualitätssicherung u. a. metallographisch untersucht. Dabei werden z. B. unaufgeschmolzene Partikel, Poren, Oxide, Phasenanteile, Homogenität, Trennungen, Risse und Verunreinigungen analysiert.
Die richtige Auswertung von thermischen Spritzproben wird stark durch Einbett- und Präparationsmethoden beeinflusst.
References / Literatur
[1] Handbuch der thermischen Spritztechnik, Technologien – Werkstoffe – Fertigung, Prof. Dr. techn. E.Lugscheider (Hrsg.), Fachbuchreihe Schweisstechnik Band 139, DVS Verlag, ISBN 3 – 87155 – 186 – 4, Düsseldorf, 2002, S. 1Search in Google Scholar
[2] Handbuch der thermischen Spritztechnik, Technologien – Werkstoffe – Fertigung, Prof. Dr. techn. E.Lugscheider (Hrsg.), Fachbuchreihe Schweisstechnik Band 139, DVS Verlag, ISBN 3 – 87155 – 186 – 4, Düsseldorf, 2002, S. 22Search in Google Scholar
[3] MTU Maintenance Berlin-Brandenburg GmbH internSearch in Google Scholar
[4] Sulzer Metco, Thermal Spray Materials Guide, 06.2010 aSearch in Google Scholar
[5] Standard Practice Manuals der OriginalherstellerSearch in Google Scholar
© 2016, Carl Hanser Verlag, München
Articles in the same Issue
- Contents/Inhalt
- Contents
- Editorial
- Editorial
- Technical Contributions/Fachbeiträge
- Effect of Preparation on the Correct Interpretation of Thermal Spray Coatings on the Basis of Selected Atmospheric Plasma and Flame Spray Coatings
- Microstructural Characterisation of Glass Ceramics as a Component Part of High Pressure Discharge Lamps
- Characterization of Ultra Thin Copper Layers
- Metallurgical Failure Investigation of a Surface Hardened Drive Shaft Made of Tempered Low-Alloy Steel 25CrMo4 (1.7218)
- Meeting Diary/Veranstaltungskalender
- Meeting Diary
Articles in the same Issue
- Contents/Inhalt
- Contents
- Editorial
- Editorial
- Technical Contributions/Fachbeiträge
- Effect of Preparation on the Correct Interpretation of Thermal Spray Coatings on the Basis of Selected Atmospheric Plasma and Flame Spray Coatings
- Microstructural Characterisation of Glass Ceramics as a Component Part of High Pressure Discharge Lamps
- Characterization of Ultra Thin Copper Layers
- Metallurgical Failure Investigation of a Surface Hardened Drive Shaft Made of Tempered Low-Alloy Steel 25CrMo4 (1.7218)
- Meeting Diary/Veranstaltungskalender
- Meeting Diary
