Home Preparation of high-performance soft magnetic Fe-0.8% P alloy by powder metallurgy
Article
Licensed
Unlicensed Requires Authentication

Preparation of high-performance soft magnetic Fe-0.8% P alloy by powder metallurgy

  • Jidong Ma , Houan Zhang , Liang Yang , Dil Faraz Khan , Yihang Yang , Siyong Gu , Jiqiong Lian and Xiaofeng Zhang
Published/Copyright: December 4, 2019
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 110 Issue 12

Abstract

Fe-0.8% P soft magnetic alloy was prepared by powder metallurgy. The compressibility and purity of powder were improved through collocation of powder particles and annealing treatment. The effect of sintering temperature on density, microstructure, and magnetic properties of the alloys was studied. Results show that the magnetic performance of the alloy was enhanced due to increased density because of the formation of liquid phase at low temperature and δ phase at high temperature. The optimum magnetic properties of Fe-0.8% P alloy with magnetic induction (B6000) of 1.83 T, maximum permeability of 18706 and coercive force of 30 A m−1 were obtained due to increased density (relative density 99.4%) and sintering temperatures.

Keywords: Fe-0.8% P alloy; Powder metallurgy; Density; Magnetic properties
∗Correspondence address, Jidong Ma, School of Materials Science and Engineering, Xiamen University of Technology, No. 60 Ligong Road, Xiamen 361024, P.R. China, Tel.: +86 05926291326, Fax: +86 05926291326, E-mail: ,

References

[1] H.Shokprollahi, K.Janghorban: J. Mater. Process. Technol.189 (1) (2007) 1. 10.1016/j.jmatprotec.2007.02.034Search in Google Scholar

[2] J.A.Bas, J.A.Calero, M.J.Dougan: J. Magn. Magn. Mater.254–255 (2003) 391. 10.1016/S0304-8853(02)00934-4Search in Google Scholar

[3] S.K.Chaurasia, P.Ujjwal, P.S.Misra, K.Chandra: Bull. Mater. Sci.35 (2012) 191. 10.1007/s12034-012-0272-zSearch in Google Scholar

[4] J.Das, K.Chandra, P.S.Misra, B.Sarma: J. Magn. Magn. Mater.320 (2008) 906. 10.1016/j.jmmm.2007.09.013Search in Google Scholar

[5] H.H.Stadelmaier: Mater. Sci. Eng. A287 (2000) 138. 10.1016/S0921-5093(00)00766-8Search in Google Scholar

[6] J.W.Stewart, J.A.Charles, E.R.Wallach: Mater. Sci. Technol.16 (2000) 275. 10.1179/02670830010157839Search in Google Scholar

[7] M.C.José Azevedo, C.S.André, M.AJulian: Powder Technol.328 (2018) 329. 10.1016/j.powtec.2018.01.009Search in Google Scholar

[8] A.Shagil, S.Mohammad, R.M.Mohd, C.S.Manish: Mater. Today: P.5 (2018) 18649. 10.1016/j.matpr.2018.06.210Search in Google Scholar

[9] B.Weglinski, J.Kaczmar: Powder Metall.4 (1980) 210. 10.1179/pom.1980.23.4.210Search in Google Scholar

[10] A.Chauhan, R.Vaish: Mater. Des.36 (2012) 1. 10.1016/j.matdes.2011.11.021Search in Google Scholar

[11] S.Tajima, T.Hattori, M.Kondoh, H.Okajima, M.Sugiyama, T.Kikko: Mater. Trans.46 (2005) 1402. 10.2497/jjspm.51.542Search in Google Scholar

[12] A.F.Zhornyak, V.E.Oliker: Powder Metall. Met. Ceram.17 (1978) 558. 10.1007/BF00791936Search in Google Scholar

[13] L.Sun, B.Oguz, P.Kwon: Powder Technol.195 (2009) 227–234. 10.1016/j.powtec.2009.06.004Search in Google Scholar

[14] J.Das, K.Chandra, P.S.Misra, B.Sarma: Mater. Sci. Eng. A479 (2008) 164. 10.1016/j.msea.2007.06.030Search in Google Scholar

[15] A.Choudhury, B.Nestler, A.Telang, M.Selzer, F.Wendler: Acta Mater.58 (2010) 3815. 10.1016/j.actamat.2010.03.030Search in Google Scholar

[16] D.C.Jiles: Acta Mater.51 (2003) 5907–5939. 10.1016/j.actamat.2003.08.011Search in Google Scholar

[17] S.M.Lee, S.J.Kang: Acta Mater.46 (1998) 3191. 10.1016/S1359-6454(97)00489-8Search in Google Scholar

[18] S.Ii, K.Hirayama, K.Matsunaga, H.Fujiib, S.Tsurekawa: Scr. Mater.68 (2013) 253. 10.1016/j.scriptamat.2012.10.028Search in Google Scholar

[19] K.Y.He: J. Appl. Phys.110 (2012) 043925–1. 10.1063/1.3622583Search in Google Scholar

[20] I.Gilbert, S.Bull, T.Evans, A.Jack, D.Stephenson, A.De: J. Mater. Sci.39 (2004) 457. 10.1023/B:JMSC.0000011498.90378.7eSearch in Google Scholar

[21] G.L.Zhao, C.Wu, M.Yan: J. Alloys Compd.710 (2017) 138. 10.1016/j.jallcom.2017.03.229Search in Google Scholar

Received: 2019-04-23
Accepted: 2019-07-18
Published Online: 2019-12-04
Published in Print: 2019-12-10

© 2019, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Editorial
  5. Original Contributions
  6. Effect of Cr and Ni on the microstructural evolution in Co–Re–Cr–Ni alloys
  7. Review
  8. Dynamic mechanical behavior of magnesium alloys: a review
  9. Original Contributions
  10. Composition dependence of the glass-forming ability and soft magnetic properties of Fe-rich Fe–Nb–B ternary alloys
  11. Deposition temperature dependence on the bonding structure and mechanical properties of laser ablated boron-carbonitride thin films
  12. Preparation of high-performance soft magnetic Fe-0.8% P alloy by powder metallurgy
  13. Preparations of superhydrophobic surfaces using the one-step spin coating method and characterizations of their anti-icing behavior
  14. Atomistic study of fracture behavior of metallic glass fiber reinforced metal-matrix nanocomposite during bending creep deformation process
  15. Development and characterization of eutectic Sn-Zn, Sn-Ag, Sn-Bi and Sn-Cu solder alloys
  16. Effect of current density and deposition time on the corrosion and wear resistance of Ni–W alloy coatings
  17. Short Communications
  18. Synthesis and characterization of layered perovskite cathode materials for SOFC application
  19. People
  20. Professor Elazar Gutmanas (28.10.1939 – 26.10.2019)
  21. DGM News
  22. DGM News
https://doi.org/10.3139/146.111849
Keywords for this article
Fe-0.8% P alloy; Powder metallurgy; Density; Magnetic properties

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Editorial
  5. Original Contributions
  6. Effect of Cr and Ni on the microstructural evolution in Co–Re–Cr–Ni alloys
  7. Review
  8. Dynamic mechanical behavior of magnesium alloys: a review
  9. Original Contributions
  10. Composition dependence of the glass-forming ability and soft magnetic properties of Fe-rich Fe–Nb–B ternary alloys
  11. Deposition temperature dependence on the bonding structure and mechanical properties of laser ablated boron-carbonitride thin films
  12. Preparation of high-performance soft magnetic Fe-0.8% P alloy by powder metallurgy
  13. Preparations of superhydrophobic surfaces using the one-step spin coating method and characterizations of their anti-icing behavior
  14. Atomistic study of fracture behavior of metallic glass fiber reinforced metal-matrix nanocomposite during bending creep deformation process
  15. Development and characterization of eutectic Sn-Zn, Sn-Ag, Sn-Bi and Sn-Cu solder alloys
  16. Effect of current density and deposition time on the corrosion and wear resistance of Ni–W alloy coatings
  17. Short Communications
  18. Synthesis and characterization of layered perovskite cathode materials for SOFC application
  19. People
  20. Professor Elazar Gutmanas (28.10.1939 – 26.10.2019)
  21. DGM News
  22. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 2.10.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.111849/html?srsltid=AfmBOorWpUO1qepDMMpIHHP3vuUtLSyVbtpIQdBDmIb2kHGOxZAa-2gy
Scroll to top button