Investigation of indentation and dry sliding wear behaviour of Al-12.6 wt.% Si-10 wt.% TiB₂ composites produced by sequential milling and pressureless sintering

References

[1] G.E.Totten, D.S.Mackenzie: Handbook of Aluminum Nolume 2 – Alloy Production And Materials Manufacturing (2003). 10.1590/S1516-18462008000300012Suche in Google Scholar

[2] J.Milligan, R.Vintila, M.Brochu: Mater. Sci. Eng.A 508 (2009) 43. 10.1016/j.msea.2008.12.017Suche in Google Scholar

[3] Z.Fan, X.Fang, S.Ji: Mater. Sci. Eng.A 412 (2005) 298. 10.1016/j.msea.2005.09.001Suche in Google Scholar

[4] N.Kang, P.Coddet, H.Liao, T.Baur, C.Coddet: Appl. Surf. Sci.378 (2016) 142. 10.1016/j.apsusc.2016.03.221Suche in Google Scholar

[5] R.S.Jiang, W.H.Wang, G.D.Song, Z.Q.Wang: J. Manuf. Process.23 (2016) 249. 10.1016/j.jmapro.2016.05.004Suche in Google Scholar

[6] E.Tekoğlu, D.Ağaoğulları, S.Mertdinç, M.Lütfi Öveçoğlu: J. Mater. Sci.53 (2018) 2537. 10.1007/s10853-017-1687-0Suche in Google Scholar

[7] C.Suryanarayana: Prog. Mater. Sci.46 (2001) 1. 10.1016/S0079-6425(99)00010-9Suche in Google Scholar

[8] J.S.Benjamin, T.E.Volin: Metall. Trans.5 (1974) 1929. 10.1007/BF02644161Suche in Google Scholar

[9] M.Omidi, A.Khodabandeh, S.Nategh, M.Khakbiz: Tribol. Int.110 (2017) 151. 10.1016/j.triboint.2017.01.033Suche in Google Scholar

[10] P.Li, W.Tian, D.Wang, X.Liu: J. Rare Earths30 (2012) 1172. 10.1016/S1002-0721(12)60200-2Suche in Google Scholar

[11] S.L.Pramod, S.R.Bakshi, B.S.Murty: J. Mater. Eng. Perform.24 (2015) 2185. 10.1007/s11665-015-1424-2Suche in Google Scholar

[12] Z.Wang, J.Tan, S.Scudino, B.A.Sun, R.T.Qu, J.He, K.G.Prashanth, W.W.Zhang, Y.Y.Li, J.Eckert: Adv. Powder Technol.25 (2014) 635. 10.1016/j.apt.2013.10.005Suche in Google Scholar

[13] R.Maiti, M.Chakraborty: J. Alloys Compd.458 (2008) 450. 10.1016/j.jallcom.2007.04.001Suche in Google Scholar

[14] M.S.Song, M.X.Zhang, S.G.Zhang, B.Huang, J.G.Li: Mater. Sci. Eng.A 473 (2008) 166. 10.1016/j.msea.2007.03.086  Suche in Google Scholar

[15] J.Wang, D.Yi, X.Su, F.Yin, H.Li: Mater. Des.30 (2009) 78. 10.1016/j.matdes.2008.04.039Suche in Google Scholar

[16] S.Kumar, M.Chakraborty, V. SubramanyaSarma, B.S.Murty: Wear265 (2008) 134. 10.1016/j.wear.2007.09.007Suche in Google Scholar

[17] K.Tee, L.Lu, M.Lai: Wear240 (2000) 59. 10.1016/S0043-1648(00)00337-9Suche in Google Scholar

[18] K.Niranjan, P.R.Lakshminarayanan: Mater. Des.47 (2013) 167. 10.1016/j.matdes.2012.11.035Suche in Google Scholar

[19] A.Mandal, M.Chakraborty, B.S.Murty: Wear262 (2007) 160. 10.1016/j.wear.2006.04.003Suche in Google Scholar

[20] S.Mertdinç, E.Tekoğlu, D.Ağaoğulları, M.L.Öveçoğlu: Mater. Test.60 (2018). 10.3139/120.111207Suche in Google Scholar

[21] A.T.Alpas, J.Zhang: Metall. Mater. Trans.A 25 (1994) 969. 10.1007/BF02652272Suche in Google Scholar

[22] M.Moazami-Goudarzi, F.Akhlaghi: Tribol. Int.102 (2016) 28. 10.1016/j.triboint.2016.05.013Suche in Google Scholar

[23] M.Roy, B.Venkataraman, V.V.Bhanuprasad, Y.R.Mahajan, G.Sundararajan: Metall. Trans.A 23 (1992) pp. 2883. 10.1007/BF02651761Suche in Google Scholar

[24] S.Mahdavi, F.Akhlaghi, J. Mater. Sci.46 (2011) 7883. 10.1007/s10853-011-5776-1Suche in Google Scholar

[25] Y.N.Liang, Z.Y.Ma, S.Z.Li, S.Li, J.Bi: J. Mater. Sci. Lett.14 (1995) 114. 10.1007/BF00456563Suche in Google Scholar

[26] A.Canakci, F.Arslan: Int. J. Adv. Manuf. Technol.63 (2012) 785. 10.1007/s00170-012-3931-8Suche in Google Scholar

[27] S.K.Jo, W.J.Lee, Y.H.Park, I.M.Park: Tribol. Lett.45 (2012) 101. 10.1007/s11249-011-9866-7Suche in Google Scholar

[28] Ö.Balci, D.Ağaoğulları, H.Gökçe, I.Duman, M.L.Öveçoğlu: J. Alloys Compd.586 (2014) s78. 10.1016/j.jallcom.2013.03.007Suche in Google Scholar

[29] K.S.Foo, W.M.Banks, A.J.Craven, A.Hendry: Composites25 (1994) 677. 10.1016/0010-4361(94)90201-1Suche in Google Scholar

[30] ÖzgeBalcı, D.Ağaoğulları, D.Ovalı, M.L.Öveçoğlu, İ.Duman: Adv. Powder Technol.26 (2015) 1200. 10.1016/j.apt.2015.06.001Suche in Google Scholar

[31] Z.F.Zhang, L.C.Zhang, Y.W.Mai: J. Mater. Sci.30 (1995) 1961. 10.1007/BF00353018Suche in Google Scholar

[32] A.T.Alpas, J.Zhang: Wear155 (1992) 83. 10.1016/0043-1648(92)90111-KSuche in Google Scholar

[33] C.N.Shyam Kumar, R.Bauri, D.Yadav: Tribol. Int.101 (2016) 284. 10.1016/j.triboint.2016.04.033Suche in Google Scholar

[34] J.R.Barber, in: Solid Mech. Its Appl.250 (2018) 29. 10.1007/978-3-319-70939-0_3Suche in Google Scholar

[35] Ö.Balcı, D.Ağaoğulları, H.Gökçe, M.L.Öveçoğlu, M.Somer: J. Alloys Compd.757 (2018) 393. 10.1016/j.jallcom.2018.05.098Suche in Google Scholar

[36] E.Tekoğlu, D.Ağaoğulları, S.Mertdinç, A.H.Paksoy, M.L.Öveçoğlu: Adv. Powder Technol.29 (2018) 2070. 10.1016/j.apt.2018.05.013Suche in Google Scholar

[37] E.Tekoğlu, D.Ağaoğulları, Y.Yürektürk, B.Bulut, M.L.Öveçoğlu: Powder Technol.340 (2018) 473. 10.1016/j.powtec.2018.09.055Suche in Google Scholar

[38] M.Wang, D.Chen, Z.Chen, Y.Wu, F.Wang, N.Ma, H.Wang: Mater. Sci. Eng.A 590 (2014) 246. 10.1016/j.msea.2013.10.021Suche in Google Scholar

[39] J.Xue, Y.F.Han, J.Wang, B.D.Sun: Mater. Sci. Technol.29 (2013) 1373. 10.1179/1743284713Y.0000000283Suche in Google Scholar

[40] D.Chen, M.L.Wang, Y.J.Zhang, X.F.Li, Z.Chen, N.H.Ma, H.W.Wang: Mater. Res. Innov.18 (2014) S4–514. 10.1179/1432891714Z.000000000731Suche in Google Scholar

[41] M.Fellah, M.A.Samad, M.Labaiz, O.Assala, A.Iost: Tribol. Int.91 (2015) 151. 10.1016/j.triboint.2015.07.006Suche in Google Scholar

[42] T.Sano, T.S.Srivatsan: Advanced Composites for Aerospace, Marine, and Land Applications II (John Wiley & Sons), (2015). 10.1002/9781119093213Suche in Google Scholar

[43] S.Q.Wang, M.X.Wei, F.Wang, Y.T.Zhao: Tribol. Int.43 (2010) 577. 10.1016/j.triboint.2009.09.006Suche in Google Scholar

[44] A.Mandal, B.S.Murty, M.Chakraborty: Mater. Sci. Eng.A 506 (2009) 27. 10.1016/j.msea.2008.11.007Suche in Google Scholar