Startseite Investigations on laser welding of magnesium alloys
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Investigations on laser welding of magnesium alloys

  • Jun Dai , Jian Huang , Zhuguo Li , Jie Dong und Yixiong Wu
Veröffentlicht/Copyright: 13. April 2012
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 103 Heft 10

Abstract

The welding processes of three different magnesium alloys ZK60, AZ31, and Mg-rare earth alloy NZ30K were studied using a high-power CO2 laser. The microstructure and tensile strength of welded joints were tested and analyzed. With increasing welding speed the tensile strength and total elongation of welded joints of ZK60 alloy are improved. The ultimate tensile strength of the welded joint of ZK60 is 211.18 MPa, 90% of the base metal. The tensile strengths of welded joints of AZ31 and NZ30K are better than those of the base metal. The expansion of the plasma of laser-welded ZK60 is the strongest with the highest temperature.

Keywords: Laser welding; Mg-rare earth alloy; Spectral analysis; Plasma; NZ30K
1 Correspondence address: Jian Huang, Shanghai Key Laboratory of Materials Laser Processing and Modification, Shanghai Jiao Tong University, 800 Dong Chuan RoadShanghai 200240China, Tel.: +86-21-34 202 837, Fax: +86-21-34 203 024, E-mail:

Refrences

[1]Z.Yang, J.P.Li, J.X.Zhang, G.W.Lorimer, J.Robson: Acta Metall. Sinica21 (2008) 313. 10.1016/S1006-7191(08)60054-XSuche in Google Scholar

[2]C.J.Bettles, M.A.Gibson, S.M.Zhu: Mater. Sci. Eng. A505 (2009) 6. 10.1016/j.msea.2008.11.004Suche in Google Scholar

[3]J.Bohlen: Acta Mater.55 (2007) 2101. 10.1016/j.actamat.2006.11.013Suche in Google Scholar

[4]I.Stulikova, B.Smola: Mater. Character.61 (2010) 952. 10.1016/j.matchar.2010.06.004Suche in Google Scholar

[5]X.Cao, M.Jahazi, J.P.Immarigeon, W.Wallace: J. Mater. Process. Technol.171 (2006) 188. 10.1016/j.jmatprotec.2005.06.068Suche in Google Scholar

[6]J.Zhu, L.Li, Z.Liu: Appl. Surf. Sci.247 (2005) 300. 10.1016/j.apsusc.2005.01.162Suche in Google Scholar

[7]A.Kouadri, L.Barrallier: Mater. Sci. Eng. A429 (2006) 11. 10.1016/j.msea.2006.03.100Suche in Google Scholar

[8]P.H.Fu, L.M.Peng, H.Y.Jiang, J.W.Chang, C.Q.Zhai: Mater. Sci. Eng. A486 (2008) 183. 10.1016/j.msea.2007.08.064Suche in Google Scholar

[9]X.Zheng, J.Dong, Y.Xiang, J.W.Chang, F.H.Wang, L.Jin, Y.Wang, W.J.Ding: Mater. Des.31 (2010) 1417. 10.1016/j.matdes.2009.08.040Suche in Google Scholar

[10]H.P.Schlenvoigt: Nat. Phys.4 (2007) 130. 10.1038/nphys811Suche in Google Scholar

[11]M.Jandaghi: J. Phys. D: Appl. Phys.42 (2009) 205. 10.1088/0022-3727/42/20/205301Suche in Google Scholar

[12]S.Dadras, M.J.Torkamany, J.Sabbaghzadeh: Opt. Lasers Eng.46 (2008) 769. 10.1016/j.optlaseng.2008.04.023Suche in Google Scholar

[13]Y.Zhang, L.Li, G.Zhang: J. Phys. D: Appl. Phys.38 (2005) 703. 10.1088/0022-3727/38/5/007Suche in Google Scholar

Received: 2011-5-29
Accepted: 2012-2-12
Published Online: 2012-04-13
Published in Print: 2012-10-01

© 2012, Carl Hanser Verlag, Munich

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Phase equilibria in the Gd–Ni binary and Mg–Ni–Gd ternary systems
  5. Thermodynamics of dilute binary solid solutions using the cluster variation method
  6. Thermal stability of coherent Pd/TiAl interfaces studied from first-principles calculations and experiments
  7. Electropulsing-induced phase transformations and their effects on the single point diamond turning of a tempered alloy AZ91
  8. Study of the mechanism of ductile-regime grinding of SiCp/Al composites using finite element simulation
  9. Investigations on laser welding of magnesium alloys
  10. Investigation of the surface of a laser-treated cast iron cylinder bore
  11. Solidification behaviour of an AA5754 Al alloy ingot cast with high impurity content
  12. Study of the structural evolution of crystalline zinc oxide films prepared by PLD
  13. Effects of sintering temperature on pore characterization and strength of porous cordierite–mullite ceramics by a pore-forming in-situ technique
  14. Sol–gel synthesis of Eu3+, Tb3+ co-doped Y2O3 scintillating nanopowders
  15. Morphological study of SiC coating developed on 2D carbon composites using MTS precursor in a hot-wall vertical reactor
  16. Self-assembling behavior and corrosion inhibition properties of TDPA films on differently structured surfaces of 2024 and 1060 aluminum alloys
  17. Photocatalytic activity of MnWO4 powder in highly effective hydrogen generation from H2O and H2O2
  18. Rheology and microstructure of polymer-modified asphalt nanocomposites
  19. Short Communications
  20. Microstructure and phase composition in a die cast Mg–Nd alloy containing Zn and Zr
  21. DGM News
  22. DGM News
https://doi.org/10.3139/146.110764
Schlagwörter für diesen Artikel
Laser welding; Mg-rare earth alloy; Spectral analysis; Plasma; NZ30K

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Phase equilibria in the Gd–Ni binary and Mg–Ni–Gd ternary systems
  5. Thermodynamics of dilute binary solid solutions using the cluster variation method
  6. Thermal stability of coherent Pd/TiAl interfaces studied from first-principles calculations and experiments
  7. Electropulsing-induced phase transformations and their effects on the single point diamond turning of a tempered alloy AZ91
  8. Study of the mechanism of ductile-regime grinding of SiCp/Al composites using finite element simulation
  9. Investigations on laser welding of magnesium alloys
  10. Investigation of the surface of a laser-treated cast iron cylinder bore
  11. Solidification behaviour of an AA5754 Al alloy ingot cast with high impurity content
  12. Study of the structural evolution of crystalline zinc oxide films prepared by PLD
  13. Effects of sintering temperature on pore characterization and strength of porous cordierite–mullite ceramics by a pore-forming in-situ technique
  14. Sol–gel synthesis of Eu3+, Tb3+ co-doped Y2O3 scintillating nanopowders
  15. Morphological study of SiC coating developed on 2D carbon composites using MTS precursor in a hot-wall vertical reactor
  16. Self-assembling behavior and corrosion inhibition properties of TDPA films on differently structured surfaces of 2024 and 1060 aluminum alloys
  17. Photocatalytic activity of MnWO4 powder in highly effective hydrogen generation from H2O and H2O2
  18. Rheology and microstructure of polymer-modified asphalt nanocomposites
  19. Short Communications
  20. Microstructure and phase composition in a die cast Mg–Nd alloy containing Zn and Zr
  21. DGM News
  22. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 17.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110764/pdf?lang=de
Button zum nach oben scrollen