Startseite Solidification behaviour of an AA5754 Al alloy ingot cast with high impurity content
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Solidification behaviour of an AA5754 Al alloy ingot cast with high impurity content

  • Sundaram Kumar , Nadendla Hari Babu , Geoff M. Scamans , Dmitry G. Eskin und Zhongyun Fan
Veröffentlicht/Copyright: 26. März 2012
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 103 Heft 10

Abstract

In view of the recycling of aluminium scrap for automotive sheet application, we have investigated the solidification behaviour of AA5754 alloy containing additional amounts of impurity elements such as Si, Fe, and Cu. Ingot casts with a high impurity content resulted in coarse α-Al dendrites and complex-shaped secondary phases. A large volume of coarse Chinese script and needle-type Fe-bearing intermetallic phases were observed to form at the centre of an ingot. In addition to the grain-boundary eutectic, spherically shaped rosette-type eutectic phases were observed within the Al grain in the high-impurity alloy. The more uniform size distribution of the Fe-bearing intermetallics observed in the Al–Ti–B grain refined alloy is attributed to the presence of a large fraction of α-Al grain boundaries which distributes the eutectic liquid where the Fe-bearing intermetallic forced to nucleate and grow.

Keywords: Al–Mg alloy; Impurity; Grain refiner; Recycling; Al2CuMg
2 Correspondence address: Dr. Kumar Sundaram, Department of Materials, University of Oxford, Oxford, OX1 3PH, UK, Tel.: +44(0)1865 273778, Fax: +44(0)1865 848790, E-mail:

Refrences

[1]G.Hoyle: Conserv. Recycl.15 (1995) 181. 10.1016/0921-3449(95)00022-4Suche in Google Scholar

[2]L.F.Mondolfo: Aluminium Alloys: Structure and Properties, London: Butterworths, 1976.10.1016/B978-0-408-70932-3.50008-5Suche in Google Scholar

[3]C.M.Allen, K.A.Q.O'Reilly, B.Cantor, P.V.Evans: Prog. Mater. Sci.43 (1998) 89. 10.1016/S0079-6425(98)00003-6Suche in Google Scholar

[4]D.G.Eskin, Suyitno, L. Katgerman: Prog. Mater. Sci.49 (2004) 629. 10.1016/S0079-6425(03)00037-9Suche in Google Scholar

[5]S.A.Metz, M.C.Flemings: AFS Trans.78 (1970) 453.Suche in Google Scholar

[6]A.K.Dahle, L.Arnberg: Acta. Mater.45 (1997) 547. 10.1016/S1359-6454(96)00203-0Suche in Google Scholar

[7]M.W.Meredith, A.L.Greer, P.V.Evans, in: J. Beech and H. Jones (Eds.), Proc. 4th Decennial Int. Conf. Solidification Processing (Eds.), Sheffield, (1997), 541.Suche in Google Scholar

[8]G.Sha, K.A.Q.O'Reilly, B.Cantor, J.M.Titchmarsh, R.G.Hamerton: Acta Mater.51 (2003) 1883. 10.1016/S1359-6454(02)00595-5Suche in Google Scholar

[9]C.A.Ahravci, M.O.Pekguleryuz: Calphad22 (1998) 147. 10.1016/S0364-5916(98)00020-0Suche in Google Scholar

[10]Z.Zhu, M.J.Starink: Mater. Sci. Eng. A488 (2008) 125. 10.1016/j.msea.2007.12.018Suche in Google Scholar

[11]Y.CLee, A.K.Dahle, D.H.StJohn and J.E.C.Hutt: Mater. Sci. Eng. A259 (1999) 43. 10.1016/S0921-5093(98)00884-3Suche in Google Scholar

[12]B.J.McKay, P.Cizek, P.Schumacher, K.A.Q.O'Reilly: Mater. Sci. Eng. A304–306 (2001) 240. 10.1016/S0921-5093(00)01476-3Suche in Google Scholar

[13]T.E.Quested, A.L.Dinsdale, A.L.Greer: Mater. Sci. Technol.22 (2006) 1126. 10.1179/174328406X114234Suche in Google Scholar

[14]M.Easton, D.StJohn: Metal. Mater. Trans.30 (1999) 1613. 10.1007/s11661-999-0098-5Suche in Google Scholar

[15]M.Johnsson and L.Backerud: Z. Metallkd.87 (1996) 216.10.1515/ijmr-1996-870312Suche in Google Scholar

[16]A.K.Dahle, L.Arnberg: Mater. Sci. Eng. A225 (1997) 38. 10.1016/S0921-5093(96)10873-XSuche in Google Scholar

[17]H.Xu, L.D.Xu, S.J.Zhang, Q.Han: Scripta Mater.54 (2006) 2191. 10.1016/j.scriptamat.2006.02.035Suche in Google Scholar

[18]B.Dutta, M.Rettenmayr: Mater. Sci. Eng.283 (2000) 218. 10.1016/S0921-5093(00)00742-5Suche in Google Scholar

[19]J.L.Murray: MRS Proc.19 (1982) 249. 10.1557/PROC-19-249Suche in Google Scholar

[20]H.Tezuka, A.Kamio, in: Proc. Int. Conf. Al alloys, Norway, Vol. 1 (1992), 117.Suche in Google Scholar

[21]G.Sha, K.A.Q.O'Reilly, B.Cantor, J.M.Titchmarsh, R.G.Hamerton: Mater. Sci. Forum331–337 (2000) 253.Suche in Google Scholar

[22]S.Kumar, N.Hari Babu, G.M.Scamans, Z.Fan: Mater. Sci. Technol.27 (2011) 1833. 10.111.1179/174-3284710y.0000000044Suche in Google Scholar

[23]S.Kumar, N.Hari Babu, G.M.Scamans, Z.Fan: Metal. Mater. Trans.42 (2011) 3141. 10.1007/s11661-011-0722-zSuche in Google Scholar

[24]C.C.Wang, C.S.Smith: Metall. Pet. Eng.188 (1950) 136.Suche in Google Scholar

[25]D.T.L.Alexander, A.L.Greer: Acta Mater.52 (2004) 5853. 10.1016/j.actamat.2004.08.043Suche in Google Scholar

[26]L.Jacques, L.Gerard, A.Ibrahim: Mater. Sci. Forum217-222 (1996) 171.Suche in Google Scholar

[27]W.T.Kim, B.Cantor: Acta Mater.42 (1994) 3045. 10.1016/0956-7151(94)90401-4Suche in Google Scholar

[28]A.K.Mukhopadhyay: Scripta Mater.41 (1999) 667. 10.1016/S1359-6462(99)00110-4Suche in Google Scholar

[29]F.P.Dai, W.J.Xie, B.Wei: Phil. Mag. Lett.89 (2009) 170. 10.1080/09500830902720909Suche in Google Scholar

Received: 2011-3-29
Accepted: 2012-2-8
Published Online: 2012-03-26
Published in Print: 2012-10-01

© 2012, Carl Hanser Verlag, Munich

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Phase equilibria in the Gd–Ni binary and Mg–Ni–Gd ternary systems
  5. Thermodynamics of dilute binary solid solutions using the cluster variation method
  6. Thermal stability of coherent Pd/TiAl interfaces studied from first-principles calculations and experiments
  7. Electropulsing-induced phase transformations and their effects on the single point diamond turning of a tempered alloy AZ91
  8. Study of the mechanism of ductile-regime grinding of SiCp/Al composites using finite element simulation
  9. Investigations on laser welding of magnesium alloys
  10. Investigation of the surface of a laser-treated cast iron cylinder bore
  11. Solidification behaviour of an AA5754 Al alloy ingot cast with high impurity content
  12. Study of the structural evolution of crystalline zinc oxide films prepared by PLD
  13. Effects of sintering temperature on pore characterization and strength of porous cordierite–mullite ceramics by a pore-forming in-situ technique
  14. Sol–gel synthesis of Eu3+, Tb3+ co-doped Y2O3 scintillating nanopowders
  15. Morphological study of SiC coating developed on 2D carbon composites using MTS precursor in a hot-wall vertical reactor
  16. Self-assembling behavior and corrosion inhibition properties of TDPA films on differently structured surfaces of 2024 and 1060 aluminum alloys
  17. Photocatalytic activity of MnWO4 powder in highly effective hydrogen generation from H2O and H2O2
  18. Rheology and microstructure of polymer-modified asphalt nanocomposites
  19. Short Communications
  20. Microstructure and phase composition in a die cast Mg–Nd alloy containing Zn and Zr
  21. DGM News
  22. DGM News
https://doi.org/10.3139/146.110760
Schlagwörter für diesen Artikel
Al–Mg alloy; Impurity; Grain refiner; Recycling; Al2CuMg

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Phase equilibria in the Gd–Ni binary and Mg–Ni–Gd ternary systems
  5. Thermodynamics of dilute binary solid solutions using the cluster variation method
  6. Thermal stability of coherent Pd/TiAl interfaces studied from first-principles calculations and experiments
  7. Electropulsing-induced phase transformations and their effects on the single point diamond turning of a tempered alloy AZ91
  8. Study of the mechanism of ductile-regime grinding of SiCp/Al composites using finite element simulation
  9. Investigations on laser welding of magnesium alloys
  10. Investigation of the surface of a laser-treated cast iron cylinder bore
  11. Solidification behaviour of an AA5754 Al alloy ingot cast with high impurity content
  12. Study of the structural evolution of crystalline zinc oxide films prepared by PLD
  13. Effects of sintering temperature on pore characterization and strength of porous cordierite–mullite ceramics by a pore-forming in-situ technique
  14. Sol–gel synthesis of Eu3+, Tb3+ co-doped Y2O3 scintillating nanopowders
  15. Morphological study of SiC coating developed on 2D carbon composites using MTS precursor in a hot-wall vertical reactor
  16. Self-assembling behavior and corrosion inhibition properties of TDPA films on differently structured surfaces of 2024 and 1060 aluminum alloys
  17. Photocatalytic activity of MnWO4 powder in highly effective hydrogen generation from H2O and H2O2
  18. Rheology and microstructure of polymer-modified asphalt nanocomposites
  19. Short Communications
  20. Microstructure and phase composition in a die cast Mg–Nd alloy containing Zn and Zr
  21. DGM News
  22. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 17.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110760/pdf?lang=de
Button zum nach oben scrollen