Texture, structure and properties of Ni-based binary alloy tapes for HTS substrates
-
Irina Gervasyeva
, Dmitrii Rodionov und Yuliya Khlebnikova
Abstract
Depending on the contents of alloying elements (Nb, up to 5.4 at.%; W, up to 7.4 at.%; Re, up to 4.1 at.%; Mo, up to 9.5 at.%; V, up to 10.1 at.%; Mn, up to 22.1 at.%; Al, 12.0 at.%; and Cr, up to 22.0 at.%) texture, structure, and physical and mechanical properties are studied in thin tapes that serve as substrates for epitaxial deposition of a high-temperature superconductor on the nickel-based binary alloys. The upper limit of alloying element content is established at which sharp cube texture of primary recrystallization is feasible to be formed. It is shown that such boundary concentration of alloying elements is associated with a certain quantitative ratio between the deformation texture components and with a certain magnitude of the concentration expansion of lattice parameter. Some mechanical and physical properties of alloys with cube texture are determined.
References
[1] D.P.Norton, A.Goyal, J.D.Budai, D.K.Christen, D.M.Kroeger, E.D.Specht, Q.He, B.Saffian, M.Paranthaman, C.E.Klabunde, D.F.Lee, B.C.Sales, F.A.List: Science274 (1996) 755. 10.1126/science.274.5288.755Suche in Google Scholar
[2] I.V.Gervasyeva, D.P.Rodionov, B.K.Sokolov, Y.V.Khlebnikova, D.V.Dolgikh: Phys. Met. Metallogr.90 (2000) 295.Suche in Google Scholar
[3] I.V.Gervasyeva, B.K.Sokolov, D.P.Rodionov, Y.V.Khlebnikova, Y.V.Podkin: Phys. Met. Metallogr.96 (2003) 209.Suche in Google Scholar
[4] G.Wassermann, J.Grewen: Texturen Metallischer Werkstoffe, Springer, Berlin (1962).10.1007/978-3-662-13128-2Suche in Google Scholar
[5] N.Hansen, D.J.Jensen, D.A.Hughes, in: H.J. Bunge (Ed.), Proc. of the 10th International Conference on Texture of Materials. Mat. Sci. Forum, Trans. Tech. Publication, Switzeland 157–162 (1994) 693.Suche in Google Scholar
[6] R.K.Ray: Acta Met. Mater. 43 No.10 (1995) 3861. 10.1016/0956-7151(95)90169-8Suche in Google Scholar
[7] V.Subramanya Sarma, J.Eickemeyer, C.Mickel, L.Schultz, B.Holzapfel: Mater. Sci. Eng. A380 (2004) 30. 10.1016/j.msea.2004.05.024Suche in Google Scholar
[8] Y.B.Park, Y.H.Kim, B.I.Kim, in: J.A. Szpunar (Ed.), Proc. of the 12th Int. Conf. on Textures of Materials. Ottawa, NRC Research Press (1999) 830.Suche in Google Scholar
[9] B.K.Sokolov, I.V.Gervasyeva, D.P.Rodionov, R.A.Schwarzer, Y.V.Podkin: The Physics of Metals and Metallography 102 No.4 (2006) 439. 10.1134/S0031918X06100115Suche in Google Scholar
[10] I.V.Gervasyeva, B.K.Sokolov, D.P.Rodionov, Y.V.Khlebnikova, in: Proc. of the 14th International Conference on Texture of Materials. Mat. Sci. Forum, Trans. Tech. Publication, Switzerland 495–497 (2005) 1213.Suche in Google Scholar
[11] G.Schulze: Metallphysik, Akademie-Verlag, Berlin (1967).Suche in Google Scholar
[12] H.J.Bunge: Texture Analysis in Materials Science, Betterworths, London (1982).Suche in Google Scholar
[13] R.M.Bozorth: Ferromagnetism, Van Nostrand, New York (1951).Suche in Google Scholar
[14] B.K.Sokolov, I.V.Gervasyeva, D.P.Rodionov, Y.V.Khlebnikova, L.R.Vladimirov, R.A.Schwarzer: Phys. Met. Metallogr.99 (2005) 172.Suche in Google Scholar
[15] B.de Boer, N.Reger, L.G.-R.Fernandez, J.Eickemeyer, P.Berberich, W.Prusseit, B.Holzapfel, L.Schultz: IEEE Trans. Appl. Supercond.11 (2001) 3477. 10.1109/77.919812Suche in Google Scholar
[16] J.Eickemeyer, R.Hühne, A.Güth, C.Rodig, H.Klauß, B.Holzapfel: Supercond. Sci. Technol.21 (2008) 105012 (7pp).Suche in Google Scholar
© 2010, Carl Hanser Verlag, München
Artikel in diesem Heft
- Contents
- Contents
- Editorial
- Editorial October 2010
- History
- Interactions between dislocations and interfaces – consequences for metal and ceramic plasticity
- Deformation mechanisms in yttria-stabilized cubic zirconia single crystals
- Basic
- Superplasticity in nanocrystalline ceramics: pure grain boundary phenomena or not?
- Thermodynamic assessment of the Mn–Ni–O system
- Assessment of niobium segregation energy in migrating ferrite/austenite phase interfaces
- In-situ synthesis and characterization of Al2O3 nanostructured whiskers in Ti–Al intermetallic matrix composites
- Texture, structure and properties of Ni-based binary alloy tapes for HTS substrates
- Microstructure, texture, grain boundary characteristics and mechanical properties of a cold rolled and annealed ferrite–bainite dual phase steel
- Applied
- Microstructure and mechanical properties of differently extruded AZ31 magnesium alloy
- The role of talc in preparing steatite slurries suitable for spray-drying
- Preparation and evaluation of chitosan-gelatin composite scaffolds modified with chondroitin-6-sulphate
- Influence of volume fraction of martensite on the work hardening behaviour of two dual-phase steels with high and low silicon contents
- Controlled synthesis of prussian blue nanoparticles based on polymyxin B/sodium bis(2-ethylhexyl)sulfosuccinate/water/isooctane reverse microemulsion for glucose biosensors
- The melting diagram of the Ti–Dy–Sn system below 40 at.% Sn
- Preparation and photocatalytic properties of TiO2 film produced via spin coating
- DGM News
- Personal
Artikel in diesem Heft
- Contents
- Contents
- Editorial
- Editorial October 2010
- History
- Interactions between dislocations and interfaces – consequences for metal and ceramic plasticity
- Deformation mechanisms in yttria-stabilized cubic zirconia single crystals
- Basic
- Superplasticity in nanocrystalline ceramics: pure grain boundary phenomena or not?
- Thermodynamic assessment of the Mn–Ni–O system
- Assessment of niobium segregation energy in migrating ferrite/austenite phase interfaces
- In-situ synthesis and characterization of Al2O3 nanostructured whiskers in Ti–Al intermetallic matrix composites
- Texture, structure and properties of Ni-based binary alloy tapes for HTS substrates
- Microstructure, texture, grain boundary characteristics and mechanical properties of a cold rolled and annealed ferrite–bainite dual phase steel
- Applied
- Microstructure and mechanical properties of differently extruded AZ31 magnesium alloy
- The role of talc in preparing steatite slurries suitable for spray-drying
- Preparation and evaluation of chitosan-gelatin composite scaffolds modified with chondroitin-6-sulphate
- Influence of volume fraction of martensite on the work hardening behaviour of two dual-phase steels with high and low silicon contents
- Controlled synthesis of prussian blue nanoparticles based on polymyxin B/sodium bis(2-ethylhexyl)sulfosuccinate/water/isooctane reverse microemulsion for glucose biosensors
- The melting diagram of the Ti–Dy–Sn system below 40 at.% Sn
- Preparation and photocatalytic properties of TiO2 film produced via spin coating
- DGM News
- Personal