Article
Licensed
Unlicensed
Requires Authentication
DGM News
Published/Copyright:
January 7, 2015
Published Online: 2015-01-07
Published in Print: 2015-01-09
© 2015, Carl Hanser Verlag, München
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Contents
- Contents
- Original Contributions
- A novel roll-bonding methodology for the cross-scale analysis of phase properties and interactions in multiphase structural materials
- Excellent cold rollability in a single pass of an Mg-4Er (wt.%) alloy
- An experimental study of the precipitation kinetics of pre-rolled Ni-Span-C 902 superalloy
- Influences of high temperature on the microstructural, electrical and mechanical properties of Ni-23 wt.% Al alloy
- Investigation of the wear resistance and microstructure of Al/SiC metal matrix composites as a function of reinforcement volume fraction and reinforcement to matrix particle size ratio applying artificial neural network
- Influence of zinc (II) ion concentration on Ni–Zn–P coatings deposited onto aluminum and their corrosion behavior
- Joining steel to aluminum alloy by resistance spot welding with a rivet
- Electrophysical and structure-sensitive properties of liquid Ga–In alloys
- Short Communications
- Synthesis and characterization of the novel nanocomposite Co(OH)2/graphene as supercapacitor materials
- Preparation of MnAlC flakes by surfactant-assisted ball-milling and the effects of annealing
- An improved two-stage sintering method for tungsten heavy alloys: conventional solid-phase sintering followed by microwave heating
- Effect of excess Pb on ferroelectric characteristics of conductive Al-doped ZnO and Sn-doped In2O3 top electrodes in PbLaZrTiOx capacitors
- Effects of La–Zn substituent and calcination temperature on the microstructure and magnetic properties of Sr-ferrites
- Predicting the corrosion tendency of α-brass in acidic and alkaline tap water
- People
- 10.3139/146.610026
- DGM News
- DGM News
Articles in the same Issue
- Contents
- Contents
- Original Contributions
- A novel roll-bonding methodology for the cross-scale analysis of phase properties and interactions in multiphase structural materials
- Excellent cold rollability in a single pass of an Mg-4Er (wt.%) alloy
- An experimental study of the precipitation kinetics of pre-rolled Ni-Span-C 902 superalloy
- Influences of high temperature on the microstructural, electrical and mechanical properties of Ni-23 wt.% Al alloy
- Investigation of the wear resistance and microstructure of Al/SiC metal matrix composites as a function of reinforcement volume fraction and reinforcement to matrix particle size ratio applying artificial neural network
- Influence of zinc (II) ion concentration on Ni–Zn–P coatings deposited onto aluminum and their corrosion behavior
- Joining steel to aluminum alloy by resistance spot welding with a rivet
- Electrophysical and structure-sensitive properties of liquid Ga–In alloys
- Short Communications
- Synthesis and characterization of the novel nanocomposite Co(OH)2/graphene as supercapacitor materials
- Preparation of MnAlC flakes by surfactant-assisted ball-milling and the effects of annealing
- An improved two-stage sintering method for tungsten heavy alloys: conventional solid-phase sintering followed by microwave heating
- Effect of excess Pb on ferroelectric characteristics of conductive Al-doped ZnO and Sn-doped In2O3 top electrodes in PbLaZrTiOx capacitors
- Effects of La–Zn substituent and calcination temperature on the microstructure and magnetic properties of Sr-ferrites
- Predicting the corrosion tendency of α-brass in acidic and alkaline tap water
- People
- 10.3139/146.610026
- DGM News
- DGM News
