Article
Licensed
Unlicensed
Requires Authentication
Contents
Published/Copyright:
November 30, 2013
Published Online: 2013-11-30
Published in Print: 2013-12-12
© 2013, Carl Hanser Verlag, München
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Contents
- Contents
- Original Contributions
- Critical sizes for coherent to semicoherent transition in precipitates
- Thixoformability evaluation of AA2011 and AA2014 alloys
- Joint strength of friction stir welded AISI 304 austenitic stainless steels
- Optimization of process parameters in explosive cladding of titanium/stainless steel 304L plates
- Optimization of the hot rolling parameters for evaluation of the formability of Nb-microalloyed steel sheet by using the Taguchi method
- XPS measurements of LDX 2101 duplex steel surface after magnetoelectropolishing
- Phase equilibria of the Al-Cr-Pr ternary system at 773 K
- Processing and mechanical characterisation of monolithic silicon carbide ceramic consolidated by spark plasma sintering (SPS)
- Effect of Mn doping on the microstructure and dielectric properties of BaHf0.1Ti0.9O3 ceramics
- Nano hydroxyapatite–polysulfone coating on Ti-6Al-4V substrate by electrospinning
- Photocatalytic and self-cleaning properties of SiO2/TiO2/SiO2 nanostructured thin film
- Formation mechanism of manganese vanadate microtubes and their electrochemical sensing properties
- Modification of the luminescent properties of ZnS nanoparticles by the adsorbed species
- DGM News
- DGM News
Articles in the same Issue
- Contents
- Contents
- Original Contributions
- Critical sizes for coherent to semicoherent transition in precipitates
- Thixoformability evaluation of AA2011 and AA2014 alloys
- Joint strength of friction stir welded AISI 304 austenitic stainless steels
- Optimization of process parameters in explosive cladding of titanium/stainless steel 304L plates
- Optimization of the hot rolling parameters for evaluation of the formability of Nb-microalloyed steel sheet by using the Taguchi method
- XPS measurements of LDX 2101 duplex steel surface after magnetoelectropolishing
- Phase equilibria of the Al-Cr-Pr ternary system at 773 K
- Processing and mechanical characterisation of monolithic silicon carbide ceramic consolidated by spark plasma sintering (SPS)
- Effect of Mn doping on the microstructure and dielectric properties of BaHf0.1Ti0.9O3 ceramics
- Nano hydroxyapatite–polysulfone coating on Ti-6Al-4V substrate by electrospinning
- Photocatalytic and self-cleaning properties of SiO2/TiO2/SiO2 nanostructured thin film
- Formation mechanism of manganese vanadate microtubes and their electrochemical sensing properties
- Modification of the luminescent properties of ZnS nanoparticles by the adsorbed species
- DGM News
- DGM News
