Artikel
Lizenziert
Nicht lizenziert
Erfordert eine Authentifizierung
Contents
Veröffentlicht/Copyright:
2. November 2018
Published Online: 2018-11-02
Published in Print: 2018-11-15
© 2018, Carl Hanser Verlag, München
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Artikel in diesem Heft
- Inhalt/Contents
- Contents
- Fachbeiträge/Technical Contributions
- Bending deformation and indentation hardness of electrochemically deposited nanocrystalline nickel-iron alloys
- Al-Si piston alloy behavior under combined mechanical and thermal cyclic loading with superimposed high-frequency thermal cycling
- Porosity of LMD manufactured parts analyzed by Archimedes method and CT
- Structure and mechanical properties of ADC 12 Al foam-polymer interpenetrating phase composites with epoxy resin or silicone
- Strength changes of 40 Cr steel subjected to cyclic torsion below the fatigue limit
- Auxetic aluminum sheets in lightweight structures
- Effect of thickness on the fracture toughness of high strength steel for gas well casings
- Effect of laser welding speed on the weld quality of a 5A06 aluminum alloy
- Correlation of ultrasound velocity with physico-mechanical properties of Jodhpur sandstone
- Etching behavior of ZnO:Ga thin films
- Repair of an aluminum plate with an elliptical hole using a composite patch
- Impression creep behavior of extruded ZK60 and ZK60+1 %Y magnesium alloys
- Experimental study for the bearing capacity calculation of concrete expanded plates in squeezed branch piles
- Mechanical properties and microstructure of autoclaved green UHPC blended with granite stone powders
- Mechanical properties and microstructure of glass carbon hybrid composites
Artikel in diesem Heft
- Inhalt/Contents
- Contents
- Fachbeiträge/Technical Contributions
- Bending deformation and indentation hardness of electrochemically deposited nanocrystalline nickel-iron alloys
- Al-Si piston alloy behavior under combined mechanical and thermal cyclic loading with superimposed high-frequency thermal cycling
- Porosity of LMD manufactured parts analyzed by Archimedes method and CT
- Structure and mechanical properties of ADC 12 Al foam-polymer interpenetrating phase composites with epoxy resin or silicone
- Strength changes of 40 Cr steel subjected to cyclic torsion below the fatigue limit
- Auxetic aluminum sheets in lightweight structures
- Effect of thickness on the fracture toughness of high strength steel for gas well casings
- Effect of laser welding speed on the weld quality of a 5A06 aluminum alloy
- Correlation of ultrasound velocity with physico-mechanical properties of Jodhpur sandstone
- Etching behavior of ZnO:Ga thin films
- Repair of an aluminum plate with an elliptical hole using a composite patch
- Impression creep behavior of extruded ZK60 and ZK60+1 %Y magnesium alloys
- Experimental study for the bearing capacity calculation of concrete expanded plates in squeezed branch piles
- Mechanical properties and microstructure of autoclaved green UHPC blended with granite stone powders
- Mechanical properties and microstructure of glass carbon hybrid composites