Abstract
The separation of Cd(II) and Ni(II) ions was studied in an aqueous sulphate medium using supported liquid membrane (SLM). D2EHPA/M2EHPA was used as a mobile carrier, microporous hydrophobic PTFE film was used as a solid support for the liquid membrane, and the strip phase was sulphuric acid. The effects of different parameters such as feed concentration, carrier concentration, feed phase pH, and strip phase pH on the separation factor and flux of Cd(II) and Ni(II) ions were studied. The optimum values obtained to achieve the maximum flux were 5.0 for feed pH, 40 vol. % for D2EHPA/M2EHPA concentration in the membrane phase, 0.5 for strip pH, and 0.012 mass % for feed concentration. Under these optimum conditions, the flux values of Cd(II) and Ni(II) were 15.7 × 10−7 kg m−2 s−1 and 2.6 × 10−7 kg m−2 s−1, respectively. The separation factors of Cd(II) over Ni(II) were studied under different experimental conditions. At a carrier concentration of 10 vol. % and feed concentration of 0.012 mass %, the maximum value of 185.1 was obtained for the separation factor of Cd(II) over Ni(II). After 24 h, the percentages of the extracted Cd(II) and Ni(II) were 83.3 % and 0.45 %, respectively.
[1] Alguacil, F. J., & Navarro, P. (2001). Permeation of cadmium through a supported liquid membrane impregnated with CYANEX 923. Hydrometallurgy, 61, 137–142. DOI: 10.1016/s0304-386x(01)00163-3. http://dx.doi.org/10.1016/S0304-386X(01)00163-310.1016/S0304-386X(01)00163-3Search in Google Scholar
[2] Alguacil, F. J., & Alonso, M. (2005). Separation of zinc(II) from cobalt(II) solutions using supported liquid membrane with DP-8R (di(2-ethylhexyl) phosphoric acid) as a carrier. Separation and Purification Technology, 41, 179–184. DOI: 10.1016/j.seppur.2004.06.010. http://dx.doi.org/10.1016/j.seppur.2004.06.01010.1016/j.seppur.2004.06.010Search in Google Scholar
[3] Dalali, N., Yavarizadeh, H., & Agrawal, Y. K. (2012). Separation of zinc and cadmium from nickel and cobalt by facilitated transport through bulk liquid membrane using trioctyl methyl ammonium chloride as carrier. Journal of Industrial and Engineering Chemistry, 18, 1001–1005. DOI: 10.1016/j.jiec.2011.11.151. http://dx.doi.org/10.1016/j.jiec.2011.11.15110.1016/j.jiec.2011.11.151Search in Google Scholar
[4] Dżygiel, P., & Wieczorek, P. (2010). Supported liquid membranes and their modifications: Definition, classification, theory, stability, application and perspectives. In V. S. Kislik (Ed.), Liquid membranes: Principles and applications in chemical separations and wastewater treatment (chapter 3, pp. 76–80). Amsterdam, The Netherlands: Elsevier. DOI: 10.1016/b978-0-444-53218-3.00003-9. 10.1016/B978-0-444-53218-3.00003-9Search in Google Scholar
[5] He, D. S., Luo, X. J., Yang, C. M., Ma, M., & Wan, Y. (2006). Study of transport and separation of Zn(II) by a combined supported liquid membrane/strip dispersion process containing D2EHPA in kerosene as the carrier. Desalination, 194, 40–51, DOI:10.1016/j.desal.2005.10.024. http://dx.doi.org/10.1016/j.desal.2005.10.02410.1016/j.desal.2005.10.024Search in Google Scholar
[6] Jafari, S., Yaftian, M. R., & Parinejad, M. (2009). Facilitated transport of cadmium as anionic iodo-complexes through bulk liquid membrane containing hexadecyltrimethylammonium bromide. Separation and Purification Technology, 70, 118–122. DOI: 10.1016/j.seppur.2009.09.003. http://dx.doi.org/10.1016/j.seppur.2009.09.00310.1016/j.seppur.2009.09.003Search in Google Scholar
[7] Jha, M. K., Kumar, V., Jeong, J. K., & Lee, J. C. (2012). Review on solvent extraction of cadmium from various solutions. Hydrometallurgy, 111–112, 1–9. DOI: 10.1016/j.hydromet.2011.09.001. http://dx.doi.org/10.1016/j.hydromet.2011.09.00110.1016/j.hydromet.2011.09.001Search in Google Scholar
[8] Juang, R. S., Kao, H. C., & Wu, W. H. (2004). Analysis of liquid membrane extraction of binary Zn(II) and Cd(II) from chloride media with Aliquat 336 based on thermodynamic equilibrium models. Journal of Membrane Science, 228, 169–177. DOI: 10.1016/j.memsci.2003.10.005. http://dx.doi.org/10.1016/j.memsci.2003.10.00510.1016/j.memsci.2003.10.005Search in Google Scholar
[9] Kumbasar, R. A. (2010). Extraction of cadmium from solutions containing various heavy metal ions by Amberlite LA-2. Journal of Industrial and Engineering Chemistry, 16, 207–213. DOI: 10.1016/j.jiec.2009.08.002. http://dx.doi.org/10.1016/j.jiec.2009.08.00210.1016/j.jiec.2009.08.002Search in Google Scholar
[10] Lv, J. W., Yang, Q., Jiang, J. W., & Chung, T. S. (2007). Exploration of heavy metal ions transmembrane flux enhancement across a supported liquid membrane by appropriate carrier selection. Chemical Engineering Science, 62, 6032–6039. DOI: 10.1016/j.ces.2007.06.013. http://dx.doi.org/10.1016/j.ces.2007.06.01310.1016/j.ces.2007.06.013Search in Google Scholar
[11] Marták, J., Schlosser, Š., & Blahušiak, M. (2011). Mass-transfer in pertraction of butyric acid by phosphonium ionic liquids and dodecane. Chemical Papers, 65, 608–619. DOI: 10.2478/s11696-011-0069-3. http://dx.doi.org/10.2478/s11696-011-0069-310.2478/s11696-011-0069-3Search in Google Scholar
[12] Nogueira, C. A., & Delmas, F. (1999). New flowsheet for the recovery of cadmium, cobalt and nickel from spent Ni-Cd batteries by solvent extraction. Hydrometallurgy, 52, 267–287. DOI: 10.1016/s0304-386x(99)00026-2. http://dx.doi.org/10.1016/S0304-386X(99)00026-210.1016/S0304-386X(99)00026-2Search in Google Scholar
[13] Parhi, P. K., Das, N. N., & Sarangi, K. (2009). Extraction of cadmium from dilute solution using supported liquid membrane. Journal of Hazardous Materials, 172, 773–779. DOI: 10.1016/j.jhazmat.2009.07.063. http://dx.doi.org/10.1016/j.jhazmat.2009.07.06310.1016/j.jhazmat.2009.07.063Search in Google Scholar
[14] Peydayesh, M., Esfandyari, G. R., Mohammadi, T., & Keshavarz Alamdari, E. (2013). Pertraction of cadmium and zinc ions using a supported liquid membrane impregnated with different carriers. Chemical Papers, 67, 389–397. DOI: 10.2478/s11696-013-0310-3. http://dx.doi.org/10.2478/s11696-013-0310-310.2478/s11696-013-0310-3Search in Google Scholar
[15] Ramachandra Reddy, B., Venkateswara Rao, S., & Neela Priya, D. (2008). Selective separation and recovery of divalent Cd and Ni from sulphate solutions with mixtures of TOPS 99 and Cyanex 471 X. Separation and Purification Technology, 59, 214–220. DOI: 10.1016/j.seppur.2007.06.006. http://dx.doi.org/10.1016/j.seppur.2007.06.00610.1016/j.seppur.2007.06.006Search in Google Scholar
[16] Rathore, N. S., Leopold, A., Pabby, A. K., Fortuny, A., Coll, M. T., & Sastre, A. M. (2009). Extraction and permeation studies of Cd(II) in acidic and neutral chloride media using Cyanex 923 on supported liquid membrane. Hydrometallurgy, 96, 81–87. DOI: 10.1016/j.hydromet.2008.08.009. http://dx.doi.org/10.1016/j.hydromet.2008.08.00910.1016/j.hydromet.2008.08.009Search in Google Scholar
[17] Sarangi, K., Sarma, P. V. R. B., Das, S. C., & Misra, V. N. (2002). Separation/recovery of cadmium and nickel from industrial waste through supported liquid membrane using D2EHPA. In Y. V. Swamy, S. N. Das, K. M. Parida, & V. N. Misra (Eds.), Management of industrial effluents and wastes (pp. 101–106). Search in Google Scholar
[18] Sarangi, K., & Das, R. P. (2004). Separation of copper and zinc by supported liquid membrane using TOPS-99 as mobile carrier. Hydrometallurgy, 71, 335–342. DOI: 10.1016/s0304-386x(03)00085-9. http://dx.doi.org/10.1016/S0304-386X(03)00085-910.1016/S0304-386X(03)00085-9Search in Google Scholar
[19] Sürücü, A., Eyüpoglu, V., & Tutkun, O. (2010). Selective separation of cobalt and nickel by supported liquid membranes. Desalination, 250, 1155–1156. DOI: 10.1016/j.desal.2009.09.131. http://dx.doi.org/10.1016/j.desal.2009.09.13110.1016/j.desal.2009.09.131Search in Google Scholar
[20] Surucu, A., Eyupoglu, V., & Tutkun, O. (2012). Selective separation of cobalt and nickel by flat sheet supported liquid membrane using Alamine 300 as carrier. Journal of Industrial and Engineering Chemistry, 18, 629–634. DOI: 10.1016/j.jiec.2011.11.019. http://dx.doi.org/10.1016/j.jiec.2011.11.01910.1016/j.jiec.2011.11.019Search in Google Scholar
[21] Swain, B., Sarangi, K., & Das, R. P. (2004). Separation of cadmium and zinc by supported liquid membrane using TOPS-99 as mobile carrier. Separation Science and Technology, 39, 2171–2188. DOI: 10.1081/ss-120039305. http://dx.doi.org/10.1081/SS-12003930510.1081/SS-120039305Search in Google Scholar
[22] Swain, B., Sarangi, K., & Das, R. P. (2006). Effect of different anions on separation of cadmium and zinc by supported liquid membrane using TOPS-99 as mobile carrier. Journal of Membrane Science, 277, 240–248. DOI: 10.1016/j.memsci.2005.10.034. http://dx.doi.org/10.1016/j.memsci.2005.10.03410.1016/j.memsci.2005.10.034Search in Google Scholar
[23] Swain, B., Jeong, J. K., Lee, J. C., & Lee, G. H. (2007). Separation of Co(II) and Li(I) by supported liquid membrane using Cyanex 272 as mobile carrier. Journal of Membrane Science, 297, 253–261. DOI: 10.1016/j.memsci.2007.03.051. http://dx.doi.org/10.1016/j.memsci.2007.03.05110.1016/j.memsci.2007.03.051Search in Google Scholar
[24] Yang, X. J., Fane, A. G., & Soldenhoff, K. (2003). Comparison of liquid membrane processes for metal separations: Permeability, stability, and selectivity. Industrial & Engineering Chemistry Research, 42, 392–403. DOI: 10.1021/ie011044z. http://dx.doi.org/10.1021/ie011044z10.1021/ie011044zSearch in Google Scholar
[25] Zhang, Y. L., Liu, P. H., Zhang, Q. Y., & Cheng, W. (2010). Separation of cadmium(II) from spent nickel/cadmium battery by emulsion liquid membrane. The Canadian Journal of Chemical Engineering, 88, 95–100. DOI: 10.1002/cjce.20251. http://dx.doi.org/10.1002/cjce.2024710.1002/cjce.20251Search in Google Scholar
© 2013 Institute of Chemistry, Slovak Academy of Sciences
Articles in the same Issue
- Rapid determination of fosetyl-aluminium in commercial pesticide formulations by high-performance liquid chromatography
- Immobilisation of acid pectinase on graphene oxide nanosheets
- Bench-scale biosynthesis of isonicotinic acid from 4-cyanopyridine by Pseudomonas putida
- Enzymatic synthesis of a chiral chalcogran intermediate
- Separation of Cd(II) and Ni(II) ions by supported liquid membrane using D2EHPA/M2EHPA as mobile carrier
- Fouling of nanofiltration membranes used for separation of fermented glycerol solutions
- Oxyhumolite influence on adsorption and desorption of phosphate on blast furnace slag in the process of two-stage selective adsorption of Cu(II) and phosphate
- Cellulose-precipitated calcium carbonate composites and their effect on paper properties
- Landfill leachate treatment using the sequencing batch biofilm reactor method integrated with the electro-Fenton process
- Effect of sintering temperature on the magnetic properties and charge density distribution of nano-NiO
- Synthesis, optimization, characterization, and potential agricultural application of polymer hydrogel composites based on cotton microfiber
- Cu(II) removal enhancement from aqueous solutions using ion-imprinted membrane technique
- Synthesis of new eburnamine-type alkaloid via direct hydroalkoxylation
- Selection of surfactants as main components of ecological wetting agent for effective extinguishing of forest and peat-bog fires
- Ultrasonic and Lewis acid ionic liquid catalytic system for Kabachnik-Fields reaction
- A simple method for creating molecularly imprinted polymer-coated bacterial cellulose nanofibers
- Determination of pK a of N-alkyl-N,N-dimethylamine-N-oxides using 1H NMR and 13C NMR spectroscopy
Articles in the same Issue
- Rapid determination of fosetyl-aluminium in commercial pesticide formulations by high-performance liquid chromatography
- Immobilisation of acid pectinase on graphene oxide nanosheets
- Bench-scale biosynthesis of isonicotinic acid from 4-cyanopyridine by Pseudomonas putida
- Enzymatic synthesis of a chiral chalcogran intermediate
- Separation of Cd(II) and Ni(II) ions by supported liquid membrane using D2EHPA/M2EHPA as mobile carrier
- Fouling of nanofiltration membranes used for separation of fermented glycerol solutions
- Oxyhumolite influence on adsorption and desorption of phosphate on blast furnace slag in the process of two-stage selective adsorption of Cu(II) and phosphate
- Cellulose-precipitated calcium carbonate composites and their effect on paper properties
- Landfill leachate treatment using the sequencing batch biofilm reactor method integrated with the electro-Fenton process
- Effect of sintering temperature on the magnetic properties and charge density distribution of nano-NiO
- Synthesis, optimization, characterization, and potential agricultural application of polymer hydrogel composites based on cotton microfiber
- Cu(II) removal enhancement from aqueous solutions using ion-imprinted membrane technique
- Synthesis of new eburnamine-type alkaloid via direct hydroalkoxylation
- Selection of surfactants as main components of ecological wetting agent for effective extinguishing of forest and peat-bog fires
- Ultrasonic and Lewis acid ionic liquid catalytic system for Kabachnik-Fields reaction
- A simple method for creating molecularly imprinted polymer-coated bacterial cellulose nanofibers
- Determination of pK a of N-alkyl-N,N-dimethylamine-N-oxides using 1H NMR and 13C NMR spectroscopy