Radioiodination of 3-iodo-4,5-diphenyl-1H-pyrazolo[3,4-c]pyridazine via isotopic exchange reaction
-
Khalid El-Azony
Abstract
Radioiodination of 3-iodo-4,5-diphenyl-1H-pyrazolo[3,4-c]pyridazine (3-IPP) with iodine-125 was performed via125I for I isotopic exchange reaction in different organic media such as acetone, dimethyl formamide (DMF), ethanol and ethyl acetate. The reaction temperature has a great effect on the labeling yield in case of DMF or ethanol as a reaction medium. The activation energies were calculated to be 4.6 kcal/mol (19.3 kJ/mol) in case of DMF as a reaction medium without phase transfer catalyst and 3.3 kcal/mol (13.8 kJ/mol) in the presence of tetrabutyl ammonium bromide (TBAB) as a phase transfer catalyst. These values are low compared with the calculated activation energy in the case of ethanol as a reaction medium (9.2 kcal/mol (38.5 kJ/mol)). The maximum radiochemical yield of 3- 125IPP (92%) was obtained by using 20 μL of Na 125I (7.4 MBq (200 μCi)) in the reaction flask and then adding the mixture of 150 μL of 3-IPP (1.88 mM) and 50 μL TBAB (3 mM) at 160 °C within 5 min. The labeled product was purified by means of high pressure liquid chromatography (HPLC) to give a specific activity of 272 MBq/mmol for 3-125IPP.
© by Oldenbourg Wissenschaftsverlag, München, Germany
Articles in the same Issue
- Cross section measurements of (n, 2n), (n, p) and (n, α) reactions on gadolinium isotopes in the neutron energy range of 13.5 to 14.8 MeV
- Indication for a volatile element 114
- Extraction of Am(III) and Eu(III) from nitrate media with Cyanex®-301 and neutral “N” donor ligands: A thermodynamic study
- A 44Ti/44Sc radionuclide generator for potential application of 44Sc-based PET-radiopharmaceuticals
- Efficient post-processing of aqueous generator eluates facilitates 68Ga-labelling under anhydrous conditions
- A new technique for tritium labeling of humic substances
- Radioiodination of 3-iodo-4,5-diphenyl-1H-pyrazolo[3,4-c]pyridazine via isotopic exchange reaction
- Radiosynthesis and evaluation of [61Cu]-9,10-phenanthrenequinone thiosemicarbazone in fibrosarcoma-bearing animals for PET imaging
- Use of synthetic multi-element standards (SMELS) in the quality control and method validation of k0-neutron activation analysis
Articles in the same Issue
- Cross section measurements of (n, 2n), (n, p) and (n, α) reactions on gadolinium isotopes in the neutron energy range of 13.5 to 14.8 MeV
- Indication for a volatile element 114
- Extraction of Am(III) and Eu(III) from nitrate media with Cyanex®-301 and neutral “N” donor ligands: A thermodynamic study
- A 44Ti/44Sc radionuclide generator for potential application of 44Sc-based PET-radiopharmaceuticals
- Efficient post-processing of aqueous generator eluates facilitates 68Ga-labelling under anhydrous conditions
- A new technique for tritium labeling of humic substances
- Radioiodination of 3-iodo-4,5-diphenyl-1H-pyrazolo[3,4-c]pyridazine via isotopic exchange reaction
- Radiosynthesis and evaluation of [61Cu]-9,10-phenanthrenequinone thiosemicarbazone in fibrosarcoma-bearing animals for PET imaging
- Use of synthetic multi-element standards (SMELS) in the quality control and method validation of k0-neutron activation analysis
