Abstract
Single phased white light emitting phosphors are more ideal for fabricating white LEDs due to higher stability and color reproducibility. Herein, we report a new white light emitting phosphor, SrCeO3: xSm3+ (x = 1 wt%, 2 wt%, 3 wt%) from a blue light emitting phosphor, SrCeO3 using an efficient, low energy consuming fuel excess gel combustion technique. From the XRD crystallographic investigation, all the synthesised samples have orthorhombic structure with space group Pnma. A broad absorption band in the UV–visible spectra around 350 nm occurs due to the efficient energy transfer from Ce4+ to Sm3+ ion. PL spectra analysis at UV excitations 280 nm and 406 nm, consist of 4f-Sm3+ transitions 4G5/2-6H5/2, 4G5/2-6H7/2, 4G5/2-6H9/2 and charge transfer band from O2− to Ce4+. The energy transfer between activator ions occurs through dipole–dipole interaction, owing to concentration quenching after 2 wt% Sm3+ and the optimised dopant concentration was 2 wt%. SrCe0.98Sm0.02O3 showed mixed blue-yellow-orange-red emission, owing near white light under both excitations. PL data were utilised to find the color parameters and found high color rendering index (CRI ∼ 84) for optimised sample at 406 nm excitation. SEM analysis reveals that the optimised sample exhibit dense ensembled morphology with well-defined grain boundaries and uniformity with average grain size ∼1.24 μm. Further, the elemental composition was confirmed using EDS analysis. From the digital photographs of samples, it is foreseen that, SrCe0.98Sm0.02O3 pumped using near UV LED chip can be used for commercial white light generation.
Acknowledgment
We extend our sincere thanks to all the concerned authorities of the Kannur University who provided me sufficient facilities here for doing my research.
-
Research ethics: Not applicable.
-
Author contributions: Shilpa C K has designed the framework of manuscript. Shilpa C K, Jasira S V, Veena V P, Umadevi P and Nissamudeen K M carried out the implementation. All the authors have accepted responsibility for the entire content of this manuscript and approved the submission.
-
Competing interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
-
Research funding: None declared.
-
Data availability: The raw data can be obtained on request from the corresponding author.
References
[1] R. Cao, J. Lin, B. Lan, et al.., “Luminescence properties, tunable emission and energy transfer of Na3Sc2(PO4)3: Sm3+, Bi3+ phosphors,” J. Mol. Struct., vol. 1282, p. 135221, 2023. https://doi.org/10.1016/j.molstruc.2023.135221.Suche in Google Scholar
[2] L. Chen, C. I. Chu, and R. S. Liu, “Improvement of emission efficiency and color rendering of high-power LED by controlling size of phosphor particles and utilization of different phosphors,” Microelectron. Reliab., vol. 52, p. 900, 2012. https://doi.org/10.1016/j.microrel.2011.07.058.Suche in Google Scholar
[3] R. Cao, Z. Jiang, T. Chen, et al.., “Study on the luminescence properties and energy transfer of Na4CaSi3O9:Ce3+, Sm3+ phosphor,” J. Lumin., vol. 243, p. 118618, 2022. https://doi.org/10.1016/j.jlumin.2021.118618.Suche in Google Scholar
[4] L. Chen, M. Fei, Z. Zhang, et al.., “Understanding the local and electronic structures toward enhanced thermal stable luminescence of CaAlSiN3:Eu2+,” Chem. Mater., vol. 28, p. 5505, 2016. https://doi.org/10.1021/acs.chemmater.6b02121.Suche in Google Scholar
[5] L. Chen, X. Chen, F. Liu, et al.., “Charge deformation and orbital hybridization: intrinsic mechanisms on tunable chromaticity of Y3Al5O12:Ce3+ luminescence by doping Gd3+ for warm white LEDs,” Sci. Rep., vol. 5, p. 11514, 2015. https://doi.org/10.1038/srep11514.Suche in Google Scholar PubMed PubMed Central
[6] V. Chauhan, P. K. Pandey, P. Dixit, P. Deshmukh, S. Satapathy, and P. C. Pandey, “Effect of Zn2+ co-doping on the luminescence of Sm3+ doped SrMoO4 phosphor,” J. Lumin., vol. 248, p. 118994, 2022. https://doi.org/10.1016/j.jlumin.2022.118994.Suche in Google Scholar
[7] Y. Zhou, X. Ge, Z. Zhang, et al.., “Design and realization on orange-red emitting of samarium activated sodium lanthanum metaphosphate with low CCT and high CP,” J. Alloys Compd., vol. 811, p. 152020, 2019. https://doi.org/10.1016/j.jallcom.2019.152020.Suche in Google Scholar
[8] A. Tiwari and S. J. Dhoble, “Tunable lanthanide/transition metal ion‐doped novel phosphors for possible application in w‐LEDs: a review,” Luminescence, vol. 35, p. 4, 2020. https://doi.org/10.1002/bio.3712.Suche in Google Scholar PubMed
[9] Y. Zhu, J. Zhu, H. Song, J. Huang, Z. Lu, and G. Pan, “Samarium doping improves luminescence efficiency of Cs3Bi2Br9 perovskite quantum dots enabling efficient white light-emitting diodes,” J. Rare Earths, vol. 39, p. 374, 2021. https://doi.org/10.1016/j.jre.2020.06.007.Suche in Google Scholar
[10] H. Iwahara, T. Esaka, H. Uchida, and N. Maeda, “Proton conduction in sintered oxides and its application to steam electrolysis for hydrogen production,” Solid State Ionics, vol. 3, p. 359, 1981. https://doi.org/10.1016/0167-2738(81)90113-2.Suche in Google Scholar
[11] R. B. Basavaraj, S. Kumar, D. P. Aarti, et al.., “Color tunable orange-red light emitting Sm3+ doped BaZrO3 nanopowders: photoluminescence properties for w-LED applications,” Inorg. Chem. Commun., vol. 128, p. 108577, 2021. https://doi.org/10.1016/j.inoche.2021.108577.Suche in Google Scholar
[12] D. Yadav, U. Kumar, and S. Upadhyay, “Study of structural, electrical, and photoluminescent properties of SrCeO3 and Sr2CeO4,” J. Adv. Ceram., vol. 8, p. 377, 2019. https://doi.org/10.1007/s40145-019-0320-x.Suche in Google Scholar
[13] R. Cao, J. Wei, T. Chen, et al.., “Synthesis, adjustable-color emission and energy transfer of Ba2MgSi2O7:Sm3+, Bi3+ phosphors,” J. Mol. Struct., vol. 1274, p. 134404, 2023. https://doi.org/10.1016/j.molstruc.2022.134404.Suche in Google Scholar
[14] D. Zhao, X. Y. Han, Y. L. Xue, R. J. Zhang, S. R. Zhang, and Y. N. Li, “Design and realization of an orange–red phosphor samarium-activated diphosphate Na5Bi1−xSmx(P2O7)2,” J. Mater. Sci. Mater. Electron., vol. 31, p. 9911, 2020. https://doi.org/10.1007/s10854-020-03536-y.Suche in Google Scholar
[15] L. A. Jacob, S. Sisira, K. Thomas, et al.., “A reddish-orange emitting samarium doped α-Na3Y(VO4)2 nanocrystals for single phased UV excitable white light applications,” J. Solid State Chem., vol. 280, p. 120998, 2019. https://doi.org/10.1016/j.jssc.2019.120998.Suche in Google Scholar
[16] F. Song, “Novel orange-red emitting Sm3+-doped Bi4Sr3Te5O19 phosphors with high color purity for white light-emitting diodes,” J. Mater. Sci. Mater. Electron., vol. 31, p. 12417, 2020. https://doi.org/10.1007/s10854-020-03788-8.Suche in Google Scholar
[17] S. V. Jasira, C. K. Shilpa, V. P. Veena, and K. M. Nissamudeen, “Unprecedented investigation on luminescence property of proton conductive samarium incorporated barium cerate nanoparticles,” Mater. Today Proc., 2023. https://doi.org/10.1016/j.matpr.2023.03.050, In press.Suche in Google Scholar
[18] M. Shivaram, H. Nagabhushana, S. C. Sharma, et al.., “Synthesis and luminescence properties of Sm3+ doped CaTiO3 nanophosphor for application in white LED under NUV excitation,” Spectrochim. Acta Mol. Biomol. Spectrosc., vol. 128, p. 891, 2014. https://doi.org/10.1016/j.saa.2014.02.117.Suche in Google Scholar PubMed
[19] A. K. Pal, S. Som, and C. H. Lu, “Synthesis and spectroscopic analysis of Sm3+ doped CeO2 ceramic powders for the application of white LEDs,” Ceram. Int., vol. 44, p. 18256, 2018. https://doi.org/10.1016/j.ceramint.2018.07.036.Suche in Google Scholar
[20] S. V. Aswathy, M. Venugopal, and H. P. Kumar, “Photoluminescent properties of nanocrystalline Sm3+-doped CaO–CeO2 system synthesized by an auto-igniting combustion synthesis technique,” Mod. Phys. Lett. B, vol. 32, p. 1850255, 2018. https://doi.org/10.1142/s021798491850255x.Suche in Google Scholar
[21] K. V. R. Murthy, B. N. Rao, B. N. Rajasekhar, B. W. R. Kumar, K. Suresh, and B. S. Rao, “Effect of flux on the formation of Sr2CeO4 phosphor doped with Er,” Phys. Procedia, vol. 29, p. 65, 2012. https://doi.org/10.1016/j.phpro.2012.03.694.Suche in Google Scholar
[22] N. P. Bhagya, P. A. Prashanth, R. Hari Krishna, B. M. Nagabhushana, and H. Ramachandra, “Enhancement of luminescence properties of SrTiO3:Sm3+ nanophosphor by charge compensator Li+ ion,” Opt. Mater., vol. 107, p. 110115, 2020. https://doi.org/10.1016/j.optmat.2020.110115.Suche in Google Scholar
[23] K. C. Sushma, S. Kumar, G. Nagaraju, et al.., “Color tunable SrZrO3:Sm3+ nanopowders with satisfactory photoluminescent, band engineering properties for warm white LEDs and advanced forensic applications,” J. Mol. Struct., vol. 1254, p. 132302, 2022. https://doi.org/10.1016/j.molstruc.2021.132302.Suche in Google Scholar
[24] C. Zhang, S. Li, X. Liu, et al.., “Low temperature synthesis of Yb doped SrCeO3 powders by gel combustion process,” Int. J. Hydrogen Energy, vol. 38, p. 12921, 2013. https://doi.org/10.1016/j.ijhydene.2013.05.069.Suche in Google Scholar
[25] S. Chen, Y. Wang, B. Zhao, et al.., “Luminescence properties of novel orange-red-emitting Gd2InSbO7:Sm3+ phosphor with high color purity for W-LEDs,” J. Lumin., vol. 237, p. 118148, 2021. https://doi.org/10.1016/j.jlumin.2021.118148.Suche in Google Scholar
[26] D. Yadav, U. Kumar, G. Nirala, A. K. Mall, and S. Upadhyay, “Effect of acceptor Na1+ doping on the properties of perovskite SrCeO3,” J. Mater. Sci. Mater. Electron., vol. 30, p. 15772, 2019. https://doi.org/10.1007/s10854-019-01963-0.Suche in Google Scholar
[27] P. Kumar, S. Singh, I. Gupta, A. Hooda, V. Kumar, and D. Singh, “Reddish-orange color tunable Sm3+ activated Gd3Al5O12 phosphors: crystallographic and photophysical investigation for lighting applications,” J. Mol. Struct., vol. 1271, p. 134074, 2023. https://doi.org/10.1016/j.molstruc.2022.134074.Suche in Google Scholar
[28] Z. Hu, D. Chen, S. Wang, N. Zhang, L. Qin, and Y. Huang, “Facile synthesis of Sm-doped BiFeO3 nanoparticles for enhanced visible light photocatalytic performance,” Mater. Sci. Eng. B Solid State Mater. Adv. Technol., vol. 220, p. 1, 2017.10.1016/j.mseb.2017.03.005Suche in Google Scholar
[29] P. Kumar, D. Singh, I. Gupta, S. Singh, and V. Kumar, “Structural and luminescent characteristics of orthorhombic GdAlO3:Sm3+ nanocrystalline materials for solid state lighting,” Chem. Phys. Lett., vol. 812, p. 140277, 2023. https://doi.org/10.1016/j.cplett.2022.140277.Suche in Google Scholar
[30] Y. Yang, Z. Liang, Z. Hu, et al.., “Synthesis and luminescence properties of double perovskite red-emitting NaSrLaTeO6:Sm3+ phosphors with high thermal stability and color purity for w-LEDs,” J. Lumin., vol. 252, p. 119262, 2022. https://doi.org/10.1016/j.jlumin.2022.119262.Suche in Google Scholar
[31] S. Thomas, R. George, N. Qamhieh, K. G. Gopchandran, S. T. Mahmoud, and A. Quatela, “Sm3+-doped strontium barium borate phosphor for white light emission: spectroscopic properties and Judd–Ofelt analysis,” Spectrochim. Acta Mol. Biomol. Spectrosc., vol. 248, p. 119187, 2021. https://doi.org/10.1016/j.saa.2020.119187.Suche in Google Scholar PubMed
[32] R. B. Basavaraj, H. Nagabhushana, B. Daruka Prasad, S. C. Sharma, S. C. Prashantha, and B. M. Nagabhushana, “A single host white light emitting Zn2SiO4:Re3+ (Eu, Dy, Sm) phosphor for LED applications,” Optik, vol. 126, p. 1745, 2015. https://doi.org/10.1016/j.ijleo.2014.07.149.Suche in Google Scholar
[33] D. P. Dutta, A. Ballal, J. Nuwad, and A. K. Tyagi, “Optical properties of sonochemically synthesized rare earth ions doped BaTiO3 nanophosphors: probable candidate for white light emission,” J. Lumin., vol. 148, p. 230, 2014. https://doi.org/10.1016/j.jlumin.2013.11.071.Suche in Google Scholar
[34] D. T. Khan, N. T. Dang, S. H. Jabarov, et al.., “Study on luminescent properties of Tb3+ and Sm3+ co-doped CaSiO3 phosphors for white light emitting diodes,” Mater. Res. Express., vol. 7, p. 016507, 2019. https://doi.org/10.1088/2053-1591/ab5ab8.Suche in Google Scholar
[35] X. Huang and H. Guo, “LiCa3MgV3O12:Sm3+: a new high-efficiency white-emitting phosphor,” Ceram. Int., vol. 44, p. 10340, 2018. https://doi.org/10.1016/j.ceramint.2018.03.043.Suche in Google Scholar
[36] V. P. Veena, C. K. Shilpa, S. V. Jasira, K. Vini, and K. M. Nissamudeen, “Adroit low-temperature synthesis and origin of blue–yellow–red emission in activated La2-xDyxMgTiO6 novel perovskite phosphor for WLED,” J. Mater. Sci. Mater. Electron., vol. 34, p. 870, 2023. https://doi.org/10.1007/s10854-023-10262-8.Suche in Google Scholar
© 2023 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Dynamical Systems & Nonlinear Phenomena
- Bifurcation analysis of ion-acoustic superperiodic waves in ultra-relativistic dense plasma
- Unsteady temperature distribution in a cylinder made of functionally graded materials under circumferentially-varying convective heat transfer boundary conditions
- Hydrodynamics
- Refined composite multivariate multiscale complexity-entropy causality plane analysis for gas-liquid two-phase flow
- Solid State Physics & Materials Science
- Red-emitting phosphors of BaSr2(PO4)2: 4 %Eu3+, 4 %A (A = Li+, Na+, K+) for white LEDs
- Effect of deposition potential and saccharin addition on structural, magnetic and magnetoresistance characteristics of NiCoFeCu films
- Structural and optical analysis of nanostructural CuCrO3 perovskite by sol–gel method
- Investigation of alkali halide crystals AX (A = Li, Na, K; X = F, Cl, Br) by elastic, mechanical and ultrasonic analysis
- Robust white light emission of UV pumped SrCeO3: xSm3+ perovskites for wLEDs
- Thermodynamics & Statistical Physics
- Theoretical determination of speed of sound and fourth virial coefficient by using Kihara (12–6) potential
Artikel in diesem Heft
- Frontmatter
- Dynamical Systems & Nonlinear Phenomena
- Bifurcation analysis of ion-acoustic superperiodic waves in ultra-relativistic dense plasma
- Unsteady temperature distribution in a cylinder made of functionally graded materials under circumferentially-varying convective heat transfer boundary conditions
- Hydrodynamics
- Refined composite multivariate multiscale complexity-entropy causality plane analysis for gas-liquid two-phase flow
- Solid State Physics & Materials Science
- Red-emitting phosphors of BaSr2(PO4)2: 4 %Eu3+, 4 %A (A = Li+, Na+, K+) for white LEDs
- Effect of deposition potential and saccharin addition on structural, magnetic and magnetoresistance characteristics of NiCoFeCu films
- Structural and optical analysis of nanostructural CuCrO3 perovskite by sol–gel method
- Investigation of alkali halide crystals AX (A = Li, Na, K; X = F, Cl, Br) by elastic, mechanical and ultrasonic analysis
- Robust white light emission of UV pumped SrCeO3: xSm3+ perovskites for wLEDs
- Thermodynamics & Statistical Physics
- Theoretical determination of speed of sound and fourth virial coefficient by using Kihara (12–6) potential