Article
Open Access
Thermal buckling load optimization of laminated general quadrilateral and trapezoidal thin plates
-
Umut Topal
Published/Copyright:
November 23, 2012
Received: 2012-9-4
Accepted: 2012-9-10
Published Online: 2012-11-23
Published in Print: 2013-02-01
©2013 by Walter de Gruyter Berlin Boston
Articles in the same Issue
- Masthead
- Masthead
- Original Articles
- Influence of nanoparticle on hygroscopic thickness swelling rate of composites from hemp fiber and recycled plastic
- Composite reinforcement by oxide TiO2
- Preparation and characterization of antibacterial silver loaded montmorillonite under microwave irradiation
- Influence on variation in process parameters for the design of xanthan-gum-facilitated ethyl cellulose microparticles for intestinal specific delivery
- Thermal and mechanical characteristics of cement nanocomposites
- Influence of class F fly ash and silica nano-micro powder on water permeability and thermal properties of high performance cementitious composites
- Use of marble dust and fly ash in stabilization of base material
- Effect of silica fume on durability of concrete composites containing fly ash
- Mechanical properties of polypropylene/glass weft knitted composites hot pressed in various structures and contents
- Three-dimensional transient analysis of functionally graded cylindrical shells subjected to asymmetric dynamic pressure
- Thermal buckling load optimization of laminated general quadrilateral and trapezoidal thin plates
- Prediction of tensile capacity of adhesive anchors including edge and group effects using neural networks
Keywords for this article
laminated quadrilateral and trapezoidal plates;
modified feasible direction method;
optimization;
thermal buckling
Creative Commons
BY-NC-ND 3.0
Articles in the same Issue
- Masthead
- Masthead
- Original Articles
- Influence of nanoparticle on hygroscopic thickness swelling rate of composites from hemp fiber and recycled plastic
- Composite reinforcement by oxide TiO2
- Preparation and characterization of antibacterial silver loaded montmorillonite under microwave irradiation
- Influence on variation in process parameters for the design of xanthan-gum-facilitated ethyl cellulose microparticles for intestinal specific delivery
- Thermal and mechanical characteristics of cement nanocomposites
- Influence of class F fly ash and silica nano-micro powder on water permeability and thermal properties of high performance cementitious composites
- Use of marble dust and fly ash in stabilization of base material
- Effect of silica fume on durability of concrete composites containing fly ash
- Mechanical properties of polypropylene/glass weft knitted composites hot pressed in various structures and contents
- Three-dimensional transient analysis of functionally graded cylindrical shells subjected to asymmetric dynamic pressure
- Thermal buckling load optimization of laminated general quadrilateral and trapezoidal thin plates
- Prediction of tensile capacity of adhesive anchors including edge and group effects using neural networks
