Startseite Green synthesis of spinel copper ferrite (CuFe2O4) nanoparticles and their toxicity
Artikel Open Access

Green synthesis of spinel copper ferrite (CuFe2O4) nanoparticles and their toxicity

  • Saade Abdalkareem Jasim , Indrajit Patra , Maria Jade Catalan Opulencia , Kadda Hachem EMAIL logo , Rosario Mireya Romero Parra , Mohammad Javed Ansari , Abduladheem Turki Jalil , Moaed E. Al-Gazally , Mahin Naderifar , Mehrdad Khatami EMAIL logo und Reza Akhavan-Sigari
Veröffentlicht/Copyright: 25. Juni 2022
Artikel downloaden (PDF)
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
Nanotechnology Reviews
Aus der Zeitschrift Nanotechnology Reviews Band 11 Heft 1

Abstract

In this study, magnetic spinel copper ferrite (CuFe2O4) nanostructures were eco-friendly synthesized using Nasturtium officinale extract. Physicochemical properties of these nanostructures were determined by transmission electron microscopy, field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), vibrating sample magnetometry, and energy dispersive X-ray mapping analysis. XRD patterns conform to the CuFe2O4 formation. SEM results demonstrated ceramic spinel CuFe2O4 nanostructures with spherical surface morphologies. The cytotoxicity effect of CuFe2O4 nanostructures against rat pheochromocytoma (PC12) cells was evaluated based on MTT assay. The magnetic nanostructures had low toxicity at a concentration of 250 µg/mL. It appears that these nanostructures can be considered as suitable candidates for drug delivery and other biomedical applications, because of their low toxicity effects.

Keywords: magnetic ceramic ferrites; copper ferrite nanostructures; cytotoxicity evaluation; green chemistry; plant extracts

1 Introduction

Brain tumors and neurological diseases (e.g., Huntington’s, Alzheimer’s, and Parkinson’s) cause nerve cell damage, reduced motor control, cognitive impairment, and death [1]. Current treatments are expensive and have various side effects such as fatigue, general weakness, nausea, and increased liver enzymes, among others [2,3]. Therefore, researchers are looking for new methods to differentiate [4] and repair nerve neurons [5], and prevent diseases [6,7]. Recent findings suggest that a number of microstructures [8] and nanomaterials induce neuroprotective effects and preserve neuronal life [9,10]. Nanomaterials [11] play a significant role in the advancement of science [12–14] and technology [15–18]. These nanomaterials are deployed in the protection of neurons and treatment of brain tumors due to their nanometer size, antioxidant [19,20], surface plasmonic resonance properties [21,22], antimicrobial [23–27], magnetic properties [28], etc. [29,30]. New developments in science [31–33], innovative production [34–36] and technology [37–39] even in energy [40,41,42,43,44], computer [45–49], mathematic [50–55], geometry [56–63], and calculation [64–68] have significant impact on human health [69–72] and life [73,74].

In recent decades, ferrite magnetic nanoparticles (NPs) with the chemical formula of MFe2O4 (M: divalent metal ion, e.g., Zn, Co, Cu, etc.) [75,76] have attracted the attention of researchers in various biomedical fields including magnetic drug delivery [77], hyperthermia [78], catalyst [79], optical [80], labeling of cells [81], etc. [82–86]. Spinel ferrite NPs are of particular importance in neuroprotection [87], and can also be employed as magnetic resonance imaging contrast agents [88]. Ceramic structures [89–92] have been employed in the treatment and diagnosis of various diseases, such as cancers, catalyst [93], and neurological diseases. Spinel ferrites play important roles in biomedicine and nanomedicine due to multimetal components and their unique magnetic properties. Ferrite magnetic NPs can be easily separated and recovered in a reaction mixture by using an external magnet [94,95]. These types of magnetically recyclable nanostructure showed a high activity even after 13 cycles [79,96]. Copper ferrite NPs are ceramic nanoscale materials [97], which can be deployed for different biomedical and biological applications. Some synthesis methodologies of magnetic ferrite NPs are reported (Table 1).

Table 1

Some synthesis methodologies of ferrite NPs and their magnetization values

Ferrite NPs Size (nm) Synthesis methodology Magnetization values (emu/g) Ref.
CoFe2O4 Below 50 Autocombustion synthesis using egg white 42.8 [98]
CuFe2O4 77.7 Sol–gel method 32 [99]
CuFe2O4/Fe2O3 core-shell 80–200 By a simple hydroxide co-precipitation and annealing method 42 [100]
CuFe2O4 ∼9 (average) Sonochemically 9.3 [101]
CuFe2O4 20–50 Chemical co-precipitation 2.7 [102]
CuFe2O4 14.5–22.3  Sol–gel autocombustion 35.4 [103]

Plant extract or plant derivatives such as polysaccharides [104–106] with their medical usage [107–111] for the production of NPs could be an alternative to physiochemical synthesis methods [112].

In this study, copper ferrite NPs were eco-friendly synthesized using aqueous extract of Nasturtium officinale (family: Brassicaceae, English name: watercress). The physicochemical properties of these NPs were determined by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and vibrating-sample magnetometer (VSM) analyses. Finally, the cytotoxicity of these was evaluated against rat pheochromocytoma (PC12) cells based on MTT (3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyltetrazolium bromide) assay.

2 Materials and methods

2.1 Materials

Iron(iii) chloride (Sigma-Aldrich, ≥98%), copper(ii) chloride (Sigma-Aldrich, ≥99%), and sodium hydroxide (Sigma-Aldrich, ≥ 98%) were utilized for the green synthesis of copper ferrite (CuFe2O4) nanoparticles (CFN). Deionized water was utilized in all stages of the synthesis. Rat pheochromocytoma (PC12) cells were purchased from the cellular bank of Pasteur Institute of Iran (Tehran). PC12 cell culture was performed with Dulbecco’s Modified Eagle’s Medium (DMEM; GIBCO, Invitrogen, Paisley, UK), penicillin and streptomycin (both from GIBCO, UK), Fetal Calf Serum (FCS; GIBCO, Invitrogen, Grand Island, NY, USA), and sodium pyruvate (GIBCO, USA) under normal conditions (37°C, 5% CO2, 1% antibiotic solution [pen-strep], high glucose DMEM containing 10% FCS). Cell viability was determined by tetrazolium dye MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide), and also dimethyl sulfoxide (DMSO) was obtained from Sigma-Aldrich (St. Louis, MO, USA).

2.2 Preparation of CFN

The flowering branches of watercress were washed with deionized water. Plant moisture was removed at 27°C. To each gram of watercress powder, 20 cc of deionized water was added and shaken at 27°C, overnight. Finally, the extract was separated with Whatman paper (size No. 40) and centrifuged. About 3.2 g of FeCl3·6H2O and 1.6 g CuCl2·2H2O was added to 200 cc of watercress aqueous extract at 60°C, respectively, and dissolved with stirring. The pH of the mixture was raised to 10 by utilizing NaOH 1 M solution. The final solution was stirred for 2 h at 60°C. The resulting NPs were washed with deionized water and finally dried at 60°C and calcined at 500°C for 8 h.

2.3 Characterization CFN

XRD analysis was deployed to determine the position of the crystal and the percentage of crystallinity of CFN using Panalytical X’PertPro. This analysis was performed in the 2θ of 10–80° using copper anode material. FE-SEM and energy dispersive X-ray (EDS) were deployed for evaluating the morphology and identifying the chemical composition of CFN, respectively (using sigma VP, ZEISS Company equipped with EDS detector of Oxford Instruments Company). The size and shape were determined by transmission electron microscopy (TEM) analysis using Philips CM120. Additionally, the magnetic properties of these NPs were analyzed using VSM analysis (LBKFB; Kashan Kavir Meghnatis Company, Iran) at room temperature.

2.4 Cytotoxicity evaluation of NPs using MTT test

The MTT assay was deployed to assess the cytotoxicity and viability of incubated cells in various concentrations (1, 10, 50, 100, 250, 500, and 1,000 µg/mL) of CFN. Doxorubicin (4 and 8 µg/mL) was utilized as positive control. Around 5,000 cells per well were seeded on the microplate. Concentration of NPs was transferred to each well. Plates were incubated at 37°C and 5% CO2 for 72 h. To perform the MTT assay, the MTT solution was added into each well. After 3 h incubation at 37°C, the medium was eliminated and 100 µL of DMSO was gently added to each well. Subsequently, the absorbance was measured at 490 nm by an enzyme-linked immunosorbent assay reader (BioTeks Elx 800). The IC50 (inhibitory concentration needed for cytotoxicity) was assessed by using the Probit test and plotting the level of inhibition vs the concentration.

3 Results

Figure 1 shows the XRD pattern of CFN synthesized at pH = 10 and temperature of 60°C. The XRD patterns of calcined CFN at 500°C for 4 and 8 h are shown in Figure 1a and b, respectively. The XRD spectrum of the calcined NPs for 4 h shows three broad peaks at 2θ = 35.9°, 57.2°, and 62.3°. The XRD spectrum of calcined NPs for 8 h shows five sharp peaks at 2θ = 30°, 35.9°, 43°, 57.2°, and 62.8°. Therefore, the synthesis process of crystallization of CFN strongly depended on the calcination time. The peaks mentioned in two XRD spectra correspond to the cubic spinel structure of the CFN [79,113,114].

Figure 1 XRD spectrum of CFN after calcination at 500°C for 4 h (a) and 8 h (b).
Figure 1

XRD spectrum of CFN after calcination at 500°C for 4 h (a) and 8 h (b).

Figure 2a and b shows the FE-SEM–EDS images prepared from calcined CFN NPs at 500°C for 4 and 8 h, respectively. SEM images of the calcined NPs for 4 and 8 h confirmed the plate-like and spherical surface morphology, respectively. Cubic and sheet-shaped plates with 76–141 nm wide illustrated that the NPs did not crystallize well in a short time (Figure 2a). As the crystallization time increases, the particles are formed in a regular and spherical manner of 15–50 nm (Figure 2b). Based on the results, by increasing the crystallization time, CFN were more spherical and smaller with higher purity. The presence of iron (59.3 wt%), copper (12.7 wt%), and oxygen (28 wt%) confirmed the type of element constituents of CFN [115]. The presence of element carbon in the EDS diagram was due to the residues of the plant extract in the structure of CFN (Figure 2c and d) [116].

Figure 2 FE-SEM–EDS images of NPs: FE-SEM of NPs calcined at 500°C for 4 h (a), 8 h (b), and EDS of CFN (c and d).
Figure 2

FE-SEM–EDS images of NPs: FE-SEM of NPs calcined at 500°C for 4 h (a), 8 h (b), and EDS of CFN (c and d).

The TEM images with a bright-field background are shown in Figure 3. Nanostructure with spherical and elliptical morphology can be detected.

Figure 3 TEM images of CFN.
Figure 3

TEM images of CFN.

The magnetic properties of CFN at room temperature and ±16 kOe applied field are shown in Figure 4. The amount of magnetic saturation (Ms) for the synthesized NPs was 10 emu/g. According to the literature, CFN had weak superparamagnetic properties. Additionally, the amount of Ms of NPs depends on their size [117,118].

Figure 4 Hysteresis loop of CFN.
Figure 4

Hysteresis loop of CFN.

The cytotoxic effect of CFN was evaluated on PC12 cell lines using MTT assay and compared with the results obtained from the untreated cells (as negative control) and doxorubicin (as positive control) (Figure 5). The CFN demonstrated an insignificance index of anti-multiplication/cytotoxicity effects on PC12 cell lines with IC50 value 225.01 µg/mL. As shown in Figure 5, the cytotoxicity of NPs at a concentration of 250 µg/mL was higher than the positive control.

Figure 5 Cell viability of CFN on neuronal cell line in comparison with doxorubicin as positive control and untreated control (*P value < 0.01).
Figure 5

Cell viability of CFN on neuronal cell line in comparison with doxorubicin as positive control and untreated control (*P value < 0.01).

4 Discussion

In this study, CFN were successfully synthesized using N. officinale aqueous extract. The spinel structure and superparamagnetic behavior of these NPs were confirmed by XRD and VSM analyses. The cytotoxicity of these was evaluated by MTT method against neuronal PC12 cells for 72 h. The cytotoxicity of these at concentrations of 1–1,000 µg/mL was evaluated against rat pheochromocytoma (PC12) cells by MTT method. The CFN demonstrated an insignificance index of anti-multiplication/cytotoxicity effects on PC12 cell lines with IC50 value of 225.01 µg/mL.

According to the literature, plant extract as well as biogenic NPs of copper oxide and iron oxide are the best biological agents in reducing brain damage and treating degenerative neurological diseases. Kanagesan et al. reported that copper ferrite NPs had antioxidant and time-dependent anti-cancer properties at low concentrations and at high concentrations, respectively. These NPs had significant toxicity against human breast adenocarcinoma cancer cells at a concentration of 500 μg/mL [119]. CuFe2O4@Ag biogenic NPs with high permeability in human gastric adenocarcinoma and Michigan Cancer Foundation-7breast cancer caused fragmentation of cell nuclei and increased caspase-3 activity and apoptosis [120]. Copper ions increased the surface to volume ratio in CFN, thus demonstrating good antibacterial properties against Staphylococcus aureus [121].

In recent years, medicinal plants together with various nanomaterials can be considered as promising neuroprotective agents. Scientists are seeking to increase the neuroprotective effect of drugs by producing NPs using plant extracts. In one study, PC12 cell damage by methadone was reduced with Nigella sativa and CuO NPs [122]. In vivo studies demonstrated that iron NPs containing plant saponin could be employed as neuroprotective agent – with better performance than plant saponin due to the synergistic effects of iron NPs and saponin [123]. The synergy of metal ions and plant extracts has been proven in reducing brain damage and treating neurodegenerative diseases. CuO NPs synthesized by applying N. sativa L. have shown suitable antioxidant properties. These biogenic NPs protected phaeochromocytoma (PC12) cells from destructive agents by reducing nucleic acid damage, inflammatory agents, and activity of the enzyme caspase-3 [122]. Sharma et al. reported that magnetic iron oxide NPs were harmless to neurons. Additionally, these NPs in combination with other therapeutic agents were useful in brain and spinal cord injuries as diagnostic and therapeutic agents [124]. In another study, iron oxide NPs were studied (in vivo analysis) for the treatment of Parkinson’s disease, because of their unique magnetic properties, thus identifying these superparamagnetic NPs as neuroprotective agents [125]. Ruanglertboon et al. demonstrated that watercress ethanolic extract improved dexamethasone-induced neuronal destruction in male mice. These results introduced the N. officinale plant as a neuroprotective agent [126]. According to the literature and the results of this study, CFN and N. officinale extract demonstrated no toxicity on neuronal PC12 cells, and as well as promising functionality; therefore, they can be suggested as attractive neuroprotective agents.

5 Conclusion

In this study, CFN were synthesized using aqueous extract of N. officinale via a simple and green method. Physicochemical properties of these NPs were evaluated by XRD, FE-SEM, EDS, VSM, and TEM analyses. Further studies should be conducted to evaluate the biocompatibility and toxicity of these NPs with high functionality and unique properties for clinical and biomedical applications.

  1. Funding information: This work was supported by Tarbiat Modares University.

  2. Author contributions: All authors have accepted responsibility for the entire content of this manuscript and approved its submission.

  3. Conflict of interest: The authors state no conflict of interest.

References

[1] Hamidian K, Sarani M, Sheikhi E, Khatami M. Cytotoxicity evaluation of green synthesized ZnO and Ag-doped ZnO nanoparticles on brain glioblastoma cells. J Mol Structure. 2022;1251:131962.10.1016/j.molstruc.2021.131962Suche in Google Scholar

[2] Islam M, Sultana G, Khan R, Islam A, Mahmud H, Raihan S. Study on mitochondrial ATPase6 gene polymorphisms as a genetic risk factor for breast cancer in Bangladeshi women. Int J Sci Res Dental Med Sci. 2021;3:18–22.Suche in Google Scholar

[3] Solano N, Perez L, Rivera E, Medina C. Hybrid odontogenic tumor with a unique presentation of the calcifying epithelial odontogenic tumor, adenomatoid odontogenic tumor, and calcifying odontogenic cyst: a case report. Int J Sci Res Dental Med Sci. 2021;3:50–4.Suche in Google Scholar

[4] Razavi S, Seyedebrahimi R, Jahromi M. Biodelivery of nerve growth factor and gold nanoparticles encapsulated in chitosan nanoparticles for Schwann-like cells differentiation of human adipose-derived stem cells. Biochem Biophys Res Commun. 2019;513:681–7.10.1016/j.bbrc.2019.03.189Suche in Google Scholar PubMed

[5] Angelova A, Angelov B. Dual and multi-drug delivery nanoparticles towards neuronal survival and synaptic repair. Neural Regeneration Res. 2017;12:886–9.10.4103/1673-5374.208546Suche in Google Scholar PubMed PubMed Central

[6] Mousazadeh M, Palizban A, Salehi R, Salehi M. Gene delivery to brain cells with apoprotein E derived peptide conjugated to polylysine (apoEdp-PLL). J Drug Target. 2007;15:226–30.10.1080/10611860601148908Suche in Google Scholar PubMed

[7] Zha T-H, Castillo O, Jahanshahi H, Yusuf A, Alassafi MO, Alsaadi FE, et al. A fuzzy-based strategy to suppress the novel coronavirus (2019-NCOV) massive outbreak. Appl Comput Math. 2021;160–76.Suche in Google Scholar

[8] Nazeer M, Hussain F, Khan MI, El-Zahar ER, Chu Y-M, Malik M. Theoretical study of MHD electro-osmotically flow of third-grade fluid in micro channel. Appl Math Comput. 2022;420:126868.10.1016/j.amc.2021.126868Suche in Google Scholar

[9] Chu Y-M, Shankaralingappa B, Gireesha B, Alzahrani F, Khan MI, Khan SU. Combined impact of Cattaneo-Christov double diffusion and radiative heat flux on bio-convective flow of Maxwell liquid configured by a stretched nano-material surface. Appl Math Comput. 2022;419:126883.10.1016/j.amc.2021.126883Suche in Google Scholar

[10] Chu Y-M, Nazir U, Sohail M, Selim MM, Lee J-R. Enhancement in thermal energy and solute particles using hybrid nanoparticles by engaging activation energy and chemical reaction over a parabolic surface via finite element approach. Fractal Fract. 2021;5:119.10.3390/fractalfract5030119Suche in Google Scholar

[11] Li B, Li C, Zhang Y, Wang Y, Jia D, Yang M, et al. Heat transfer performance of MQL grinding with different nanofluids for Ni-based alloys using vegetable oil. J Clean Prod. 2017;154:1–11.10.1016/j.jclepro.2017.03.213Suche in Google Scholar

[12] Wang Y, Li C, Zhang Y, Yang M, Li B, Jia D, et al. Experimental evaluation of the lubrication properties of the wheel/workpiece interface in minimum quantity lubrication (MQL) grinding using different types of vegetable oils. J Clean Prod. 2016;127:487–99.10.1016/j.jclepro.2016.03.121Suche in Google Scholar

[13] Zhang Y, Li C, Ji H, Yang X, Yang M, Jia D, et al. Analysis of grinding mechanics and improved predictive force model based on material-removal and plastic-stacking mechanisms. Int J Mach Tools Manufacture. 2017;122:81–97.10.1016/j.ijmachtools.2017.06.002Suche in Google Scholar

[14] Guo S, Li C, Zhang Y, Wang Y, Li B, Yang M, et al. Experimental evaluation of the lubrication performance of mixtures of castor oil with other vegetable oils in MQL grinding of nickel-based alloy. J Clean Prod. 2017;140:1060–76.10.1016/j.jclepro.2016.10.073Suche in Google Scholar

[15] Zhang Y, Li C, Jia D, Zhang D, Zhang X. Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding. Int J Mach Tools Manufacture. 2015;99:19–33.10.1016/j.ijmachtools.2015.09.003Suche in Google Scholar

[16] Zhang Y, Li C, Jia D, Zhang D, Zhang X. Experimental evaluation of MoS2 nanoparticles in jet MQL grinding with different types of vegetable oil as base oil. J Clean Prod. 2015;87:930–40.10.1016/j.jclepro.2014.10.027Suche in Google Scholar

[17] Wang Y, Li C, Zhang Y, Yang M, Li B, Dong L, et al. Processing characteristics of vegetable oil-based nanofluid MQL for grinding different workpiece materials. Int J Precis Eng Manufacturing-Green Technol. 2018;5:327–39.10.1007/s40684-018-0035-4Suche in Google Scholar

[18] Zhang Y, Li HN, Li C, Huang C, Ali HM, Xu X, et al. Nano-enhanced biolubricant in sustainable manufacturing: from processability to mechanisms. Friction. 2022;10:803–41.10.1007/s40544-021-0536-ySuche in Google Scholar

[19] Rzigalinski BA, Carfagna CS, Ehrich M. Cerium oxide nanoparticles in neuroprotection and considerations for efficacy and safety. Wiley Interdiscip Rev: Nanomed Nanobiotechnol. 2017;9:e1444.10.1002/wnan.1444Suche in Google Scholar PubMed PubMed Central

[20] Lu C, Wang YG, Zaman F, Wu X, Adhaduk M, Chang A, et al. Structural characterization and antioxidant activity of a novel high-molecular-weight polysaccharide from Ziziphus jujuba cv. Muzao. J Food Meas Charact. 2022;16:2191–200.10.1007/s11694-022-01288-3Suche in Google Scholar

[21] Liu B, Liu G, Zhang B. Decoration of gold and silver nanoparticles by neuroprotective gabapentin drug and studying the release behavior by surface plasmon resonance. Chem Pap. 2021;75:1–7.10.1007/s11696-021-01661-4Suche in Google Scholar

[22] Zhu H, Zhu J, Zhang Z, Zhao R. Crossover from linear chains to a honeycomb network for the nucleation of hexagonal boron nitride grown on the Ni (111) surface. J Phys Chem C. 2021;125:26542–51.10.1021/acs.jpcc.1c09334Suche in Google Scholar

[23] Cao M, Chang Z, Tan J, Wang X, Zhang P, Lin S, et al. Superoxide radical-mediated self-synthesized Au/MoO3–x hybrids with enhanced peroxidase-like activity and photothermal effect for anti-MRSA therapy. ACS Appl Mater Interfaces. 2022;14(11):13025–37.10.1021/acsami.1c23676Suche in Google Scholar PubMed

[24] Arkaban H, Barani M, Akbarizadeh MR, Pal Singh Chauhan N, Jadoun S, Dehghani Soltani M, et al. Polyacrylic acid nanoplatforms: antimicrobial, tissue engineering, and cancer theranostic applications. Polymers. 2022;14:1259.10.3390/polym14061259Suche in Google Scholar PubMed PubMed Central

[25] Cao Y, Abbasi M, Alijani HQ, Akbarizadeh MR, Iravani S, Barani M, et al. Ceramic magnetic ferrite nanoribbons: eco-friendly synthesis and their antifungal and parasiticidal activity. Ceram Int. 2022;48:3448–54.10.1016/j.ceramint.2021.10.121Suche in Google Scholar

[26] Nazaripour E, Mosazadeh F, Rahimi SS, Alijani HQ, Isaei E, Borhani F, et al. Ferromagnetic nickel(ii) oxide (NiO) nanoparticles: biosynthesis, characterization and their antibacterial activities. Rendiconti Lincei Scienze Fisiche e Naturali. 2022;33:1–8.10.1007/s12210-021-01042-9Suche in Google Scholar

[27] Haghighat M, Alijani HQ, Ghasemi M, Khosravi S, Borhani F, Sharifi F, et al. Cytotoxicity properties of plant-mediated synthesized K-doped ZnO nanostructures. Bioprocess Biosyst Eng. 2022;45:97–105.10.1007/s00449-021-02643-2Suche in Google Scholar PubMed

[28] Naserzadeh P, Hafez AA, Abdorahim M, Abdollahifar MA, Shabani R, Peirovi H, et al. Curcumin loading potentiates the neuroprotective efficacy of Fe3O4 magnetic nanoparticles in cerebellum cells of schizophrenic rats. Biomed Pharmacotherapy. 2018;108:1244–52.10.1016/j.biopha.2018.09.106Suche in Google Scholar PubMed

[29] Gao T, Li C, Zhang Y, Yang M, Jia D, Jin T, et al. Dispersing mechanism and tribological performance of vegetable oil-based CNT nanofluids with different surfactants. Tribol Int. 2019;131:51–63.10.1016/j.triboint.2018.10.025Suche in Google Scholar

[30] Zhang Y, Li C, Jia D, Li B, Wang Y, Yang M, et al. Experimental study on the effect of nanoparticle concentration on the lubricating property of nanofluids for MQL grinding of Ni-based alloy. J Mater Process Technol. 2016;232:100–15.10.1016/j.jmatprotec.2016.01.031Suche in Google Scholar

[31] Zhao T-H, Wang M-K, Chu Y-M. A sharp double inequality involving generalized complete elliptic integral of the first kind. AIMS Math. 2020;5:4512–28.10.3934/math.2020290Suche in Google Scholar

[32] Zhao T-H, Shi L, Chu Y-M. Convexity and concavity of the modified Bessel functions of the first kind with respect to Hölder means. Rev de la Real Academia de Cienc Exactas, Físicas y Naturales Ser A Matemáticas. 2020;114:1–14.10.1007/s13398-020-00825-3Suche in Google Scholar

[33] Zhao T-H, Chu Y-M, Jiang Y-L, Li Y-M. Best possible bounds for Neuman-Sándor mean by the identric, quadratic and contraharmonic means. Abstr Appl Anal. 2013;28:626–34.10.1155/2013/348326Suche in Google Scholar

[34] Qiao W, Wang Y, Zhang J, Tian W, Tian Y, Yang Q. An innovative coupled model in view of wavelet transform for predicting short-term PM10 concentration. J Environ Manag. 2021;289:112438.10.1016/j.jenvman.2021.112438Suche in Google Scholar PubMed

[35] Zhang J, Li C, Zhang Y, Yang M, Jia D, Liu G, et al. Experimental assessment of an environmentally friendly grinding process using nanofluid minimum quantity lubrication with cryogenic air. J Clean Prod. 2018;193:236–48.10.1016/j.jclepro.2018.05.009Suche in Google Scholar

[36] Xin C, Changhe L, Wenfeng D, Yun C, Cong M, Xuefeng X, et al. Minimum quantity lubrication machining of aeronautical materials using carbon group nanolubricant: from mechanisms to application. Chin J Aeronautics. 2021;36:1–12.Suche in Google Scholar

[37] Qiao W, Li Z, Liu W, Liu E. Fastest‐growing source prediction of US electricity production based on a novel hybrid model using wavelet transform. Int J Energy Res. 2022;46:1766–88.10.1002/er.7293Suche in Google Scholar

[38] Zhang S-w, Shang L-y, Zhou L, Lv Z-b. Hydrate deposition model and flow assurance technology in gas-dominant pipeline transportation systems: a review. Energy Fuels. 2022;36:4094–106.10.1021/acs.energyfuels.1c03812Suche in Google Scholar

[39] Karthikeyan K, Karthikeyan P, Baskonus HM, Venkatachalam K, Chu YM. Almost sectorial operators on Ψ‐Hilfer derivative fractional impulsive integro‐differential equations. Math Methods Appl Sci. 2021;45:1–11.10.1002/mma.7954Suche in Google Scholar

[40] Shi J, Zhao Y, He J, Li T, Zhu F, Tian W, et al. Deferred polarization saturation boosting superior energy-storage efficiency and density simultaneously under moderate electric field in relaxor ferroelectrics. ACS Appl Energy Mater. 2022;5:3436–46.10.1021/acsaem.1c04017Suche in Google Scholar

[41] He J, Liu X, Zhao Y, Du H, Zhang T, Shi J. Dielectric stability and energy-storage performance of BNT-based relaxor ferroelectrics through Nb5+ and its excess modification. ACS Appl Electron Mater. 2022;4:735–43.10.1021/acsaelm.1c01129Suche in Google Scholar

[42] Zhao T-H, Qian W-M, Chu Y-M. Sharp power mean bounds for the tangent and hyperbolic sine means. J Math Inequal. 2021;15:1459–72.10.7153/jmi-2021-15-100Suche in Google Scholar

[43] Li B, Li C, Zhang Y, Wang Y, Jia D, Yang M. Grinding temperature and energy ratio coefficient in MQL grinding of high-temperature nickel-base alloy by using different vegetable oils as base oil. Chin J Aeronautics. 2016;29:1084–95.10.1016/j.cja.2015.10.012Suche in Google Scholar

[44] Zhang D, Li C, Zhang Y, Jia D, Zhang X. Experimental research on the energy ratio coefficient and specific grinding energy in nanoparticle jet MQL grinding. Int J Adv Manuf Technol. 2015;78:1275–88.10.1007/s00170-014-6722-6Suche in Google Scholar

[45] Zhao TH, Khan MI, Chu YM. Artificial neural networking (ANN) analysis for heat and entropy generation in flow of non‐Newtonian fluid between two rotating disks. Math Methods Appl Sci. 2022;45:1–12.10.1002/mma.7310Suche in Google Scholar

[46] Zhao T-H, He Z-Y, Chu Y-M. Sharp bounds for the weighted Hölder mean of the zero-balanced generalized complete elliptic integrals. Comput Methods Funct Theory. 2021;21:413–26.10.1007/s40315-020-00352-7Suche in Google Scholar

[47] Zhao T-H, Wang M-K, Zhang W, Chu Y-M. Quadratic transformation inequalities for Gaussian hypergeometric function. J Inequal Appl. 2018;2018:1–15.10.1186/s13660-018-1848-ySuche in Google Scholar PubMed PubMed Central

[48] Zhao T-H, Shen Z-H, Chu Y-M. Sharp power mean bounds for the lemniscate type means. Rev de la Real Academia de Cienc Exactas, Físicas y Naturales Ser A Matemáticas. 2021;115:1–16.10.1007/s13398-021-01117-0Suche in Google Scholar

[49] Zhao T-H, Qian W-M, Chu Y-M. On approximating the arc lemniscate functions. Indian J Pure Appl Math. 2022;53:316–29.10.1007/s13226-021-00016-9Suche in Google Scholar

[50] Zhao T, Wang M, Chu Y. On the bounds of the perimeter of an ellipse. Acta Math Sci. 2022;42:491–501.10.1007/s10473-022-0204-ySuche in Google Scholar

[51] Iqbal MA, Wang Y, Miah MM, Osman MS. Study on date–Jimbo–Kashiwara–Miwa equation with conformable derivative dependent on time parameter to find the exact dynamic wave solutions. Fractal Fract. 2021;6:4.10.3390/fractalfract6010004Suche in Google Scholar

[52] Zhao T-H, Wang M-K, Chu Y-M. Concavity and bounds involving generalized elliptic integral of the first kind. J Math Inequal. 2021;15:701–24.10.7153/jmi-2021-15-50Suche in Google Scholar

[53] Zhao T-H, Wang M-K, Chu Y-M. Monotonicity and convexity involving generalized elliptic integral of the first kind. Rev de la Real Academia de Cienc Exactas, Físicas y Naturales Ser A Matemáticas. 2021;115:1–13.10.1007/s13398-020-00992-3Suche in Google Scholar

[54] Chu H-H, Zhao T-H, Chu Y-M. Sharp bounds for the Toader mean of order 3 in terms of arithmetic, quadratic and contraharmonic means. Math Slov. 2020;70:1097–1112.10.1515/ms-2017-0417Suche in Google Scholar

[55] Chu Y, Zhao T. Concavity of the error function with respect to Hölder means. Math Inequal Appl. 2016;19:589–95.10.7153/mia-19-43Suche in Google Scholar

[56] Zhao T-H, He Z-Y, Chu Y-M. On some refinements for inequalities involving zero-balanced hypergeometric function. AIMS Math. 2020;5:6479–95.10.3934/math.2020418Suche in Google Scholar

[57] Song Y-Q, Zhao T-H, Chu Y-M, Zhang X-H. Optimal evaluation of a Toader-type mean by power mean. J Inequal Appl. 2015;2015:1–12.10.1186/s13660-015-0927-6Suche in Google Scholar

[58] Chu Y-M, Zhao T-H. Convexity and concavity of the complete elliptic integrals with respect to Lehmer mean. J Inequal Appl. 2015;2015:1–6.10.1186/s13660-015-0926-7Suche in Google Scholar

[59] Sun H, Zhao T, Chu Y, Liu B. A note on the Neuman-Sándor mean. J Math Inequal. 2014;8:287–97.10.7153/jmi-08-20Suche in Google Scholar

[60] Chu Y, Zhao T, Liu B. Optimal bounds for Neuman-Sándor mean in terms of the convex combination of logarithmic and quadratic or contra-harmonic means. J Math Inequal. 2014;8:201–17.10.7153/jmi-08-13Suche in Google Scholar

[61] Zhao T-H, Chu Y-M, Liu B-Y. Optimal bounds for Neuman-Sándor mean in terms of the convex combinations of harmonic, geometric, quadratic, and contraharmonic means. Abstr Appl Anal. 2012;2012:302635–9.10.1155/2012/302635Suche in Google Scholar

[62] Wang M-K, Hong M-Y, Xu Y-F, Shen Z-H, Chu Y-M. Inequalities for generalized trigonometric and hyperbolic functions with one parameter. J Math Inequal. 2020;14:1–21.10.7153/jmi-2020-14-01Suche in Google Scholar

[63] Xu H-Z, Qian W-M, Chu Y-M. Sharp bounds for the lemniscatic mean by the one-parameter geometric and quadratic means. Rev de la Real Academia de Cienc Exactas, Físicas y Naturales Ser A Matemáticas. 2022;116:1–15.10.1007/s13398-021-01162-9Suche in Google Scholar

[64] Zhao T-H, Wang M-K, Hai G-J, Chu Y-M. Landen inequalities for Gaussian hypergeometric function. Rev de la Real Academia de Cienc Exactas, Físicas y Naturales Ser A Matemáticas. 2022;116:1–23.10.1007/s13398-021-01197-ySuche in Google Scholar

[65] Zhao T-H, Zhou B-C, Wang M-K, Chu Y-M. On approximating the quasi-arithmetic mean. J Inequal Appl. 2019;2019:1–12.10.1186/s13660-019-1991-0Suche in Google Scholar

[66] Zhao T-H, Yang Z-H, Chu Y-M. Monotonicity properties of a function involving the psi function with applications. J Inequal Appl. 2015;2015:1–10.10.1186/s13660-015-0724-2Suche in Google Scholar

[67] Chu Y-M, Wang H, Zhao T-H. Sharp bounds for the Neuman mean in terms of the quadratic and second Seiffert means. J Inequal Appl. 2014;2014:1–14.10.1186/1029-242X-2014-299Suche in Google Scholar

[68] Yuming C, Tiehong Z, Yingqing S. Sharp bounds for Neuman-Sándor mean in terms of the convex combination of quadratic and first Seiffert means. Acta Math Sci. 2014;34:797–806.10.1016/S0252-9602(14)60050-3Suche in Google Scholar

[69] Sazgar AK, Karimpour S, Abbaszadeh M, Parsa S. Virchow’s node in a different presentation. Int J Sci Res Dental Med Sci. 2020;2:105–6.Suche in Google Scholar

[70] Chukwuanukwu T, Afiadigwe E, Apakama A, Chukwuanukwu R, Uchechukwu E, Nwankwo, et al. Epidemiology of cleft lip and palate in Nigeria: a data-based study. Int J Sci Res Dental Med Sci. 2021;3:73–7.Suche in Google Scholar

[71] Barri Dizaj M, Abdolkarimpour Z, Rabie M, Mehrdad M. Comparison of oral manifestations in patients with hyperthyroidism and hypothyroidism in outpatient clinic of razi hospital in Rasht City in 2018. Int J Sci Res Dental Med Sci. 2019;1:1–6.Suche in Google Scholar

[72] Rim K, Ameni C, Garrach BE, Chaouch MH, Touzi S. Anatomical dimension of the anterior maxillary alveolar process: a cone beam computed tomography study. Int J Sci Res Dental Med Sci. 2021;3:111–6.Suche in Google Scholar

[73] He Z-Y, Abbes A, Jahanshahi H, Alotaibi ND, Wang Y. Fractional-order discrete-time SIR epidemic model with vaccination: chaos and complexity. Mathematics. 2022;10:165.10.3390/math10020165Suche in Google Scholar

[74] Jin F, Qian Z-S, Chu Y-M, ur Rahman M. On nonlinear evolution model for drinking behavior under Caputo-Fabrizio derivative. J Appl Anal Comput. 2022;12:790–806.10.11948/20210357Suche in Google Scholar

[75] Jalajerdi R, Ghanbari D. Microwave synthesis and magnetic investigation of CuFe2O4 nanoparticles and poly styrene-carbon nanotubes composites. J Nanostructures. 2016;6:278–84.Suche in Google Scholar

[76] Amir M, Gungunes H, Baykal A, Almessiere MA, Sözeri H, Ercan I, et al. Effect of annealing temperature on magnetic and mössbauer properties of ZnFe2O4 nanoparticles by sol-gel approach. J Superconductivity Nov Magnetism. 2018;31:3347–56.10.1007/s10948-018-4610-2Suche in Google Scholar

[77] Nigam A, Pawar S. Structural, magnetic, and antimicrobial properties of zinc doped magnesium ferrite for drug delivery applications. Ceram Int. 2020;46:4058–64.10.1016/j.ceramint.2019.10.243Suche in Google Scholar

[78] Mazario E, Menendez N, Herrasti P, Canete M, Connord V, Carrey J. Magnetic hyperthermia properties of electrosynthesized cobalt ferrite nanoparticles. J Phys Chem C. 2013;117:11405–11.10.1021/jp4023025Suche in Google Scholar

[79] Amir M, Sertkol M, Baykal A, Sözeri H. Magnetic and catalytic properties of CuxFe1−xFe2O4 nanoparticles. J Superconductivity Nov Magnetism. 2015;28:2447–54.10.1007/s10948-015-3050-5Suche in Google Scholar

[80] Asiri S, Amir M, Güner S, Gungunes H, Batoo KM, Sertkol M, et al. Structural, optical and Mössbauer study of Ba1 − xCuxFe12O19 (0.5  ≤  x) nano hexaferrites. J Inorg Organomet Polym Mater. 2018;28:1446–56.10.1007/s10904-018-0794-ySuche in Google Scholar

[81] Ghanbarei S, Sattarahmady N, Zarghampoor F, Azarpira N, Hossein-Aghdaie M. Effects of labeling human mesenchymal stem cells with superparamagnetic zinc–nickel ferrite nanoparticles on cellular characteristics and adipogenesis/osteogenesis differentiation. Biotechnol Lett. 2021;43:1–15.10.1007/s10529-021-03134-wSuche in Google Scholar PubMed

[82] Amir M, Gungunes H, Slimani Y, Tashkandi N, El Sayed HS, Aldakheel F, et al. Mössbauer studies and magnetic properties of cubic CuFe2O4 nanoparticles. J Superconductivity Nov Magnetism. 2019;32:557–64.10.1007/s10948-018-4733-5Suche in Google Scholar

[83] Asiri S, Sertkol M, Güngüneş H, Amir M, Manikandan A, Ercan İ, et al. The temperature effect on magnetic properties of NiFe2O4 nanoparticles. J Inorg Organomet Polym Mater. 2018;28:1587–97.10.1007/s10904-018-0813-zSuche in Google Scholar

[84] Rashid S, Abouelmagd EI, Khalid A, Farooq FB, Chu Y-M. Some recent developments on dynamical ℏ-discrete fractional type inequalities in the frame of nonsingular and nonlocal kernels. Fractals. 2022;30(2):2240110.10.1142/S0218348X22401107Suche in Google Scholar

[85] Li C, Li J, Wang S, Zhang Q. Modeling and numerical simulation of the grinding temperature field with nanoparticle jet of MQL. Adv Mech Eng. 2013;5:986984.10.1155/2013/986984Suche in Google Scholar

[86] Liu M, Li C, Zhang Y, An Q, Yang M, Gao T, et al. Cryogenic minimum quantity lubrication machining: from mechanism to application. Front Mech Eng. 2021;16:649–97.10.1007/s11465-021-0654-2Suche in Google Scholar

[87] Jeun M, Jeoung JW, Moon S, Kim YJ, Lee S, Paek SH, et al. Engineered superparamagnetic Mn0. 5Zn0. 5Fe2O4 nanoparticles as a heat shock protein induction agent for ocular neuroprotection in glaucoma. Biomaterials. 2011;32:387–94.10.1016/j.biomaterials.2010.09.016Suche in Google Scholar PubMed

[88] Liu J, Deng M, Huang Z, Yin G, Liao X, Gu J. Preparation of ZnFe2O4 nanoparticles in the template of silk-fibroin peptide and their neuro-cytocompability in PC12 cells. Colloids Surf B: Biointerfaces. 2013;107:19–26.10.1016/j.colsurfb.2013.01.072Suche in Google Scholar PubMed

[89] Yang M, Li C, Zhang Y, Jia D, Zhang X, Hou Y, et al. Maximum undeformed equivalent chip thickness for ductile-brittle transition of zirconia ceramics under different lubrication conditions. Int J Mach Tools Manufacture. 2017;122:55–65.10.1016/j.ijmachtools.2017.06.003Suche in Google Scholar

[90] Min Y, Li C, Zhang YB, Dongzhou J, Li R, Hou Y, et al. Predictive model for minimum chip thickness and size effect in single diamond grain grinding of zirconia ceramics under different lubricating conditions. Ceram Int. 2019;45(12, 15):14908–20.10.1016/j.ceramint.2019.04.226Suche in Google Scholar

[91] Yang M, Li C, Zhang Y, Jia D, Li R, Hou Y, et al. Effect of friction coefficient on chip thickness models in ductile-regime grinding of zirconia ceramics. Int J Adv Manuf Technol. 2019;102:2617–32.10.1007/s00170-019-03367-0Suche in Google Scholar

[92] Jia D, Li C, Zhang Y, Yang M, Zhang X, Li R, et al. Experimental evaluation of surface topographies of NMQL grinding ZrO2 ceramics combining multiangle ultrasonic vibration. Int J Adv Manuf Technol. 2019;100:457–73.10.1007/s00170-018-2718-ySuche in Google Scholar

[93] Xiong Q-M, Chen Z, Huang J-T, Zhang M, Song H, Hou X-F, et al. Preparation, structure and mechanical properties of sialon ceramics by transition metal-catalyzed nitriding reaction. Rare Met. 2020;39:589–96.10.1007/s12598-020-01385-6Suche in Google Scholar

[94] Amir M, Ali W, Baykal A, Khan GS. Development of highly active, chemically stable and recyclable magnetic nanophotocatalyst based on plasmonic silver nanoparticles and photosensitive trans-3-(trans-4-imidazolyl) acrylic acid molecules. Appl Organomet Chem. 2021;35:e6229.10.1002/aoc.6229Suche in Google Scholar

[95] Amir M, Baykal A, Sözeri H, Güngüneş H, Shirsath SE. Oleylamine surface functionalized FeCoyFe2−yO4 (0.0⩽y⩽1.0) nanoparticles. Arab J Chem. 2019;12:4971–81.10.1016/j.arabjc.2016.10.010Suche in Google Scholar

[96] Amir M, Sözeri H, Korkmaz AD, Baykal A. Concentration and temperature-dependent magnetic properties of Ba1−xZnxFe12O19 hexaferrites. Ceram Int. 2018;44:988–92.10.1016/j.ceramint.2017.10.033Suche in Google Scholar

[97] Caddeo F, Loche D, Casula MF, Corrias A. Evidence of a cubic iron sub-lattice in t-CuFe2O4 demonstrated by X-ray absorption fine structure. Sci Rep. 2018;8:797.10.1038/s41598-017-19045-8Suche in Google Scholar PubMed PubMed Central

[98] Gabal MA, Katowah DF, Hussein MA, Al-Juaid AA, Awad A, Abdel-Daiem AM, et al. Structural and magnetoelectrical properties of MFe2O4 (M = Co, Ni, Cu, Mg, and Zn) ferrospinels synthesized via an egg-white biotemplate. ACS Omega. 2021;6:22180–87.10.1021/acsomega.1c02858Suche in Google Scholar PubMed PubMed Central

[99] Mulud FH, Dahham NA, Waheed IF. Synthesis and characterization of copper ferrite nanoparticles. IOP Conference Series: Materials Science and Engineering; 2020. p. 07212510.1088/1757-899X/928/7/072125Suche in Google Scholar

[100] Tran Thi TU, Phan VH, Pham Nguyen HT, Nguyen TL, Vu AN, Le TK. Synthesis of magnetic CuFe2O4/Fe2O3 core-shell materials and their application in photo-Fenton-like process with oxalic acid as a radical-producing source. J Asian Ceram Societies. 2021;9:1091–102.10.1080/21870764.2021.1939241Suche in Google Scholar

[101] Mondal B, Kundu M, Mandal SP, Saha R, Roy UK, Roychowdhury A, et al. Sonochemically synthesized spin-canted CuFe2O4 nanoparticles for heterogeneous green catalytic click chemistry. ACS Omega. 2019;4:13845–52.10.1021/acsomega.9b01477Suche in Google Scholar PubMed PubMed Central

[102] Arumugam S. Structural and magnetic properties of CuFe2O4 as-prepared and thermally treated spinel nanoferrites. Indian J Pure Appl Phys (IJPAP). 2015;52:124–30.Suche in Google Scholar

[103] Satheeshkumar MK, Ranjith Kumar E, Srinivas C, Prasad G, Meena SS, Pradeep I, et al. Structural and magnetic properties of CuFe2O4 ferrite nanoparticles synthesized by cow urine assisted combustion method. J Magnetism Magnetic Mater. 2019;484:120–5.10.1016/j.jmmm.2019.03.128Suche in Google Scholar

[104] Hou C, Yin M, Lan P, Wang H, Nie H, Ji X. Recent progress in the research of Angelica sinensis (Oliv.) Diels polysaccharides: extraction, purification, structure and bioactivities. Chem Biol Technol Agriculture. 2021;8:1–14.10.1186/s40538-021-00214-xSuche in Google Scholar

[105] Hajiseyedazizi SN, Samei ME, Alzabut J, Chu Y-m. On multi-step methods for singular fractional q-integro-differential equations. Open Math. 2021;19:1378–1405.10.1515/math-2021-0093Suche in Google Scholar

[106] Rashid S, Sultana S, Karaca Y, Khalid A, Chu Y-M. Some further extensions considering discrete proportional fractional operators. Fractals. 2022;30:2240026.10.1142/S0218348X22400266Suche in Google Scholar

[107] Mustapha SN, John A, Sheikh H, Chowdhury AJK, Yunus K. Acute-lethal toxicity test on juvenile Oreochromis niloticus exposed to Piper betle extract under static exposure. Ecofeminism Clim Change. 2020;1:79–87.10.1108/EFCC-03-2020-0001Suche in Google Scholar

[108] Zuraidah M, John BA, Kamaruzzaman Y. Cytotoxicity on MCF7 cell lines exposed to an extract of the jacalin from jackfruit seed. Sci Herit J. 2017;1:16–8.10.26480/gws.02.2017.16.18Suche in Google Scholar

[109] Abbas P, Hashim Y, Salleh HM. Cytotoxic effects and response surface optimization of solvent extraction of crude extracts from Aquilaria subintegra uninfected branch. Sci Herit J. 2018;2:10–5.10.26480/gws.02.2018.10.15Suche in Google Scholar

[110] Wang J, Ai K, Lu L. Flame-retardant porous hexagonal boron nitride for safe and effective radioactive iodine capture. J Mater Chem A. 2019;7:16850–8.10.1039/C9TA04489BSuche in Google Scholar

[111] Liu W, Li J, Zheng J, Song Y, Shi Z, Lin Z, et al. Different pathways for Cr(iii) oxidation: implications for Cr (VI) reoccurrence in reduced chromite ore processing residue. Environ Sci Technol. 2020;54:11971–9.10.1021/acs.est.0c01855Suche in Google Scholar PubMed

[112] Wang F, Khan MN, Ahmad I, Ahmad H, Abu-Zinadah H, Chu Y-M. Numerical solution of traveling waves in chemical kinetics: time fractional fishers equations. Fractals. 2022;30(2):2240051.10.1142/S0218348X22400515Suche in Google Scholar

[113] Leichtweis J, Silvestri S, Welter N, Vieira Y, Zaragoza-Sánchez PI, Chávez-Mejía AC, et al. Wastewater containing emerging contaminants treated by residues from the brewing industry based on biochar as a new CuFe2O4/biochar photocatalyst. Process Saf Environ Prot. 2021;150:497–509.10.1016/j.psep.2021.04.041Suche in Google Scholar

[114] Guo X, Xu Y, Wang K, Zha F, Tang X, Tian H. Synthesis of magnetic CuFe2O4 self-assembled hollow nanospheres and its application for degrading methylene blue. Res Chem Intermed. 2020;46:853–69.10.1007/s11164-019-03994-ySuche in Google Scholar

[115] Maleki A, Firouzi-Haji R, Farahani P. Green multicomponent synthesis of benzodiazepines in the presence of CuFe2O4 as an efficient magnetically recyclable nanocatalyst under solvent-free ball-milling conditions at room temperature. Org Chem Res. 2018;4:86–94.Suche in Google Scholar

[116] Raeisi M, Alijani HQ, Peydayesh M, Khatami M, Bagheri Baravati F, Borhani F, et al. Magnetic cobalt oxide nanosheets: green synthesis and in vitro cytotoxicity. Bioprocess Biosyst Eng. 2021;44:1–10.10.1007/s00449-021-02518-6Suche in Google Scholar PubMed

[117] Khayat Sarkar Z, Khayat Sarkar F. Synthesis and magnetic properties investigations of Fe3O4 nanoparticles. Int J Nanosci Nanotechnol. 2011;7:197–200.Suche in Google Scholar

[118] Ghaani M, Saffari J. Synthesis of CuFe2O4 nanoparticles by a new co-precipitation method and using them as efficient catalyst for one-pot synthesis of naphthoxazinones. J Nanostructures. 2016;6:172–8.Suche in Google Scholar

[119] Kanagesan S, Hashim M, AB Aziz S, Ismail I, Tamilselvan S, Alitheen N, et al. Evaluation of antioxidant and cytotoxicity activities of copper ferrite (CuFe2O4) and zinc ferrite (ZnFe2O4) nanoparticles synthesized by sol-gel self-combustion method. Appl Sci. 2016;6:184.10.3390/app6090184Suche in Google Scholar

[120] Garfami M, Jalali A, Salehzadeh A. A novel CuFe2O4@ Ag nanocomposite biosynthesized by Spirulina platensis exhibits an anticancer effect on human gastric adenocarcinoma and Michigan Cancer Foundation‐7 breast cancer cell lines. Appl Organomet Chem. 2020;34:e5971.10.1002/aoc.5971Suche in Google Scholar

[121] Atacan K, Özacar M, Özacar M. Investigation of antibacterial properties of novel papain immobilized on tannic acid modified Ag/CuFe2O4 magnetic nanoparticles. Int J Biol Macromolecules. 2018;109:720–31.10.1016/j.ijbiomac.2017.12.066Suche in Google Scholar PubMed

[122] Yan W, Liu Y, Mansooridara S, Kalantari AS, Sadeghian N, Taslimi P, et al. Chemical characterization and neuroprotective properties of copper nanoparticles green-synthesized by Nigella sativa L. seed aqueous extract against methadone-induced cell death in adrenal phaeochromocytoma (PC12) cell line. J Exp Nanosci. 2020;15:280–96.10.1080/17458080.2020.1778167Suche in Google Scholar

[123] Yang Q, Zhao C, Zhao J, Ye Y. Synthesis and neuroprotective effects of the complex nanoparticles of iron and sapogenin isolated from the defatted seeds of Camellia oleifera. Pharm Biol. 2017;55:428–34.10.1080/13880209.2016.1245346Suche in Google Scholar PubMed PubMed Central

[124] Sharma HS, Menon PK, Lafuente JV, Aguilar ZP, Wang YA, Muresanu DF, et al. The role of functionalized magnetic iron oxide nanoparticles in the central nervous system injury and repair: new potentials for neuroprotection with Cerebrolysin therapy. J Nanosci Nanotechnol. 2014;14:577–95.10.1166/jnn.2014.9213Suche in Google Scholar PubMed

[125] Umarao P, Bose S, Bhattacharyya S, Kumar A, Jain S. Neuroprotective potential of superparamagnetic iron oxide nanoparticles along with exposure to electromagnetic field in 6-OHDA rat model of Parkinson’s disease. J Nanosci Nanotechnol. 2016;16:261–9.10.1166/jnn.2016.11103Suche in Google Scholar PubMed

[126] Ruanglertboon W, Kumarnsit E, Dej-Adisai S, Vongvatcharanon U, Udomuksorn W. The neuroprotective effect of Nasturtium officinale on learning ability and density of parvalbumin neurons in the hippocampus of neurodegenerative-induced mice model. Sains Malaysiana. 2019;48:2191–9.10.17576/jsm-2019-4810-15Suche in Google Scholar
Received: 2022-03-22
Revised: 2022-05-24
Accepted: 2022-05-29
Published Online: 2022-06-25

© 2022 Saade Abdalkareem Jasim et al., published by De Gruyter

This work is licensed under the Creative Commons Attribution 4.0 International License.

Artikel in diesem Heft

  1. Research Articles
  2. Theoretical and experimental investigation of MWCNT dispersion effect on the elastic modulus of flexible PDMS/MWCNT nanocomposites
  3. Mechanical, morphological, and fracture-deformation behavior of MWCNTs-reinforced (Al–Cu–Mg–T351) alloy cast nanocomposites fabricated by optimized mechanical milling and powder metallurgy techniques
  4. Flammability and physical stability of sugar palm crystalline nanocellulose reinforced thermoplastic sugar palm starch/poly(lactic acid) blend bionanocomposites
  5. Glutathione-loaded non-ionic surfactant niosomes: A new approach to improve oral bioavailability and hepatoprotective efficacy of glutathione
  6. Relationship between mechano-bactericidal activity and nanoblades density on chemically strengthened glass
  7. In situ regulation of microstructure and microwave-absorbing properties of FeSiAl through HNO3 oxidation
  8. Research on a mechanical model of magnetorheological fluid different diameter particles
  9. Nanomechanical and dynamic mechanical properties of rubber–wood–plastic composites
  10. Investigative properties of CeO2 doped with niobium: A combined characterization and DFT studies
  11. Miniaturized peptidomimetics and nano-vesiculation in endothelin types through probable nano-disk formation and structure property relationships of endothelins’ fragments
  12. N/S co-doped CoSe/C nanocubes as anode materials for Li-ion batteries
  13. Synergistic effects of halloysite nanotubes with metal and phosphorus additives on the optimal design of eco-friendly sandwich panels with maximum flame resistance and minimum weight
  14. Octreotide-conjugated silver nanoparticles for active targeting of somatostatin receptors and their application in a nebulized rat model
  15. Controllable morphology of Bi2S3 nanostructures formed via hydrothermal vulcanization of Bi2O3 thin-film layer and their photoelectrocatalytic performances
  16. Development of (−)-epigallocatechin-3-gallate-loaded folate receptor-targeted nanoparticles for prostate cancer treatment
  17. Enhancement of the mechanical properties of HDPE mineral nanocomposites by filler particles modulation of the matrix plastic/elastic behavior
  18. Effect of plasticizers on the properties of sugar palm nanocellulose/cinnamon essential oil reinforced starch bionanocomposite films
  19. Optimization of nano coating to reduce the thermal deformation of ball screws
  20. Preparation of efficient piezoelectric PVDF–HFP/Ni composite films by high electric field poling
  21. MHD dissipative Casson nanofluid liquid film flow due to an unsteady stretching sheet with radiation influence and slip velocity phenomenon
  22. Effects of nano-SiO2 modification on rubberised mortar and concrete with recycled coarse aggregates
  23. Mechanical and microscopic properties of fiber-reinforced coal gangue-based geopolymer concrete
  24. Effect of morphology and size on the thermodynamic stability of cerium oxide nanoparticles: Experiment and molecular dynamics calculation
  25. Mechanical performance of a CFRP composite reinforced via gelatin-CNTs: A study on fiber interfacial enhancement and matrix enhancement
  26. A practical review over surface modification, nanopatterns, emerging materials, drug delivery systems, and their biophysiochemical properties for dental implants: Recent progresses and advances
  27. HTR: An ultra-high speed algorithm for cage recognition of clathrate hydrates
  28. Effects of microalloying elements added by in situ synthesis on the microstructure of WCu composites
  29. A highly sensitive nanobiosensor based on aptamer-conjugated graphene-decorated rhodium nanoparticles for detection of HER2-positive circulating tumor cells
  30. Progressive collapse performance of shear strengthened RC frames by nano CFRP
  31. Core–shell heterostructured composites of carbon nanotubes and imine-linked hyperbranched polymers as metal-free Li-ion anodes
  32. A Galerkin strategy for tri-hybridized mixture in ethylene glycol comprising variable diffusion and thermal conductivity using non-Fourier’s theory
  33. Simple models for tensile modulus of shape memory polymer nanocomposites at ambient temperature
  34. Preparation and morphological studies of tin sulfide nanoparticles and use as efficient photocatalysts for the degradation of rhodamine B and phenol
  35. Polyethyleneimine-impregnated activated carbon nanofiber composited graphene-derived rice husk char for efficient post-combustion CO2 capture
  36. Electrospun nanofibers of Co3O4 nanocrystals encapsulated in cyclized-polyacrylonitrile for lithium storage
  37. Pitting corrosion induced on high-strength high carbon steel wire in high alkaline deaerated chloride electrolyte
  38. Formulation of polymeric nanoparticles loaded sorafenib; evaluation of cytotoxicity, molecular evaluation, and gene expression studies in lung and breast cancer cell lines
  39. Engineered nanocomposites in asphalt binders
  40. Influence of loading voltage, domain ratio, and additional load on the actuation of dielectric elastomer
  41. Thermally induced hex-graphene transitions in 2D carbon crystals
  42. The surface modification effect on the interfacial properties of glass fiber-reinforced epoxy: A molecular dynamics study
  43. Molecular dynamics study of deformation mechanism of interfacial microzone of Cu/Al2Cu/Al composites under tension
  44. Nanocolloid simulators of luminescent solar concentrator photovoltaic windows
  45. Compressive strength and anti-chloride ion penetration assessment of geopolymer mortar merging PVA fiber and nano-SiO2 using RBF–BP composite neural network
  46. Effect of 3-mercapto-1-propane sulfonate sulfonic acid and polyvinylpyrrolidone on the growth of cobalt pillar by electrodeposition
  47. Dynamics of convective slippery constraints on hybrid radiative Sutterby nanofluid flow by Galerkin finite element simulation
  48. Preparation of vanadium by the magnesiothermic self-propagating reduction and process control
  49. Microstructure-dependent photoelectrocatalytic activity of heterogeneous ZnO–ZnS nanosheets
  50. Cytotoxic and pro-inflammatory effects of molybdenum and tungsten disulphide on human bronchial cells
  51. Improving recycled aggregate concrete by compression casting and nano-silica
  52. Chemically reactive Maxwell nanoliquid flow by a stretching surface in the frames of Newtonian heating, nonlinear convection and radiative flux: Nanopolymer flow processing simulation
  53. Nonlinear dynamic and crack behaviors of carbon nanotubes-reinforced composites with various geometries
  54. Biosynthesis of copper oxide nanoparticles and its therapeutic efficacy against colon cancer
  55. Synthesis and characterization of smart stimuli-responsive herbal drug-encapsulated nanoniosome particles for efficient treatment of breast cancer
  56. Homotopic simulation for heat transport phenomenon of the Burgers nanofluids flow over a stretching cylinder with thermal convective and zero mass flux conditions
  57. Incorporation of copper and strontium ions in TiO2 nanotubes via dopamine to enhance hemocompatibility and cytocompatibility
  58. Mechanical, thermal, and barrier properties of starch films incorporated with chitosan nanoparticles
  59. Mechanical properties and microstructure of nano-strengthened recycled aggregate concrete
  60. Glucose-responsive nanogels efficiently maintain the stability and activity of therapeutic enzymes
  61. Tunning matrix rheology and mechanical performance of ultra-high performance concrete using cellulose nanofibers
  62. Flexible MXene/copper/cellulose nanofiber heat spreader films with enhanced thermal conductivity
  63. Promoted charge separation and specific surface area via interlacing of N-doped titanium dioxide nanotubes on carbon nitride nanosheets for photocatalytic degradation of Rhodamine B
  64. Elucidating the role of silicon dioxide and titanium dioxide nanoparticles in mitigating the disease of the eggplant caused by Phomopsis vexans, Ralstonia solanacearum, and root-knot nematode Meloidogyne incognita
  65. An implication of magnetic dipole in Carreau Yasuda liquid influenced by engine oil using ternary hybrid nanomaterial
  66. Robust synthesis of a composite phase of copper vanadium oxide with enhanced performance for durable aqueous Zn-ion batteries
  67. Tunning self-assembled phases of bovine serum albumin via hydrothermal process to synthesize novel functional hydrogel for skin protection against UVB
  68. A comparative experimental study on damping properties of epoxy nanocomposite beams reinforced with carbon nanotubes and graphene nanoplatelets
  69. Lightweight and hydrophobic Ni/GO/PVA composite aerogels for ultrahigh performance electromagnetic interference shielding
  70. Research on the auxetic behavior and mechanical properties of periodically rotating graphene nanostructures
  71. Repairing performances of novel cement mortar modified with graphene oxide and polyacrylate polymer
  72. Closed-loop recycling and fabrication of hydrophilic CNT films with high performance
  73. Design of thin-film configuration of SnO2–Ag2O composites for NO2 gas-sensing applications
  74. Study on stress distribution of SiC/Al composites based on microstructure models with microns and nanoparticles
  75. PVDF green nanofibers as potential carriers for improving self-healing and mechanical properties of carbon fiber/epoxy prepregs
  76. Osteogenesis capability of three-dimensionally printed poly(lactic acid)-halloysite nanotube scaffolds containing strontium ranelate
  77. Silver nanoparticles induce mitochondria-dependent apoptosis and late non-canonical autophagy in HT-29 colon cancer cells
  78. Preparation and bonding mechanisms of polymer/metal hybrid composite by nano molding technology
  79. Damage self-sensing and strain monitoring of glass-reinforced epoxy composite impregnated with graphene nanoplatelet and multiwalled carbon nanotubes
  80. Thermal analysis characterisation of solar-powered ship using Oldroyd hybrid nanofluids in parabolic trough solar collector: An optimal thermal application
  81. Pyrene-functionalized halloysite nanotubes for simultaneously detecting and separating Hg(ii) in aqueous media: A comprehensive comparison on interparticle and intraparticle excimers
  82. Fabrication of self-assembly CNT flexible film and its piezoresistive sensing behaviors
  83. Thermal valuation and entropy inspection of second-grade nanoscale fluid flow over a stretching surface by applying Koo–Kleinstreuer–Li relation
  84. Mechanical properties and microstructure of nano-SiO2 and basalt-fiber-reinforced recycled aggregate concrete
  85. Characterization and tribology performance of polyaniline-coated nanodiamond lubricant additives
  86. Combined impact of Marangoni convection and thermophoretic particle deposition on chemically reactive transport of nanofluid flow over a stretching surface
  87. Spark plasma extrusion of binder free hydroxyapatite powder
  88. An investigation on thermo-mechanical performance of graphene-oxide-reinforced shape memory polymer
  89. Effect of nanoadditives on the novel leather fiber/recycled poly(ethylene-vinyl-acetate) polymer composites for multifunctional applications: Fabrication, characterizations, and multiobjective optimization using central composite design
  90. Design selection for a hemispherical dimple core sandwich panel using hybrid multi-criteria decision-making methods
  91. Improving tensile strength and impact toughness of plasticized poly(lactic acid) biocomposites by incorporating nanofibrillated cellulose
  92. Green synthesis of spinel copper ferrite (CuFe2O4) nanoparticles and their toxicity
  93. The effect of TaC and NbC hybrid and mono-nanoparticles on AA2024 nanocomposites: Microstructure, strengthening, and artificial aging
  94. Excited-state geometry relaxation of pyrene-modified cellulose nanocrystals under UV-light excitation for detecting Fe3+
  95. Effect of CNTs and MEA on the creep of face-slab concrete at an early age
  96. Effect of deformation conditions on compression phase transformation of AZ31
  97. Application of MXene as a new generation of highly conductive coating materials for electromembrane-surrounded solid-phase microextraction
  98. A comparative study of the elasto-plastic properties for ceramic nanocomposites filled by graphene or graphene oxide nanoplates
  99. Encapsulation strategies for improving the biological behavior of CdS@ZIF-8 nanocomposites
  100. Biosynthesis of ZnO NPs from pumpkin seeds’ extract and elucidation of its anticancer potential against breast cancer
  101. Preliminary trials of the gold nanoparticles conjugated chrysin: An assessment of anti-oxidant, anti-microbial, and in vitro cytotoxic activities of a nanoformulated flavonoid
  102. Effect of micron-scale pores increased by nano-SiO2 sol modification on the strength of cement mortar
  103. Fractional simulations for thermal flow of hybrid nanofluid with aluminum oxide and titanium oxide nanoparticles with water and blood base fluids
  104. The effect of graphene nano-powder on the viscosity of water: An experimental study and artificial neural network modeling
  105. Development of a novel heat- and shear-resistant nano-silica gelling agent
  106. Characterization, biocompatibility and in vivo of nominal MnO2-containing wollastonite glass-ceramic
  107. Entropy production simulation of second-grade magnetic nanomaterials flowing across an expanding surface with viscidness dissipative flux
  108. Enhancement in structural, morphological, and optical properties of copper oxide for optoelectronic device applications
  109. Aptamer-functionalized chitosan-coated gold nanoparticle complex as a suitable targeted drug carrier for improved breast cancer treatment
  110. Performance and overall evaluation of nano-alumina-modified asphalt mixture
  111. Analysis of pure nanofluid (GO/engine oil) and hybrid nanofluid (GO–Fe3O4/engine oil): Novel thermal and magnetic features
  112. Synthesis of Ag@AgCl modified anatase/rutile/brookite mixed phase TiO2 and their photocatalytic property
  113. Mechanisms and influential variables on the abrasion resistance hydraulic concrete
  114. Synergistic reinforcement mechanism of basalt fiber/cellulose nanocrystals/polypropylene composites
  115. Achieving excellent oxidation resistance and mechanical properties of TiB2–B4C/carbon aerogel composites by quick-gelation and mechanical mixing
  116. Microwave-assisted sol–gel template-free synthesis and characterization of silica nanoparticles obtained from South African coal fly ash
  117. Pulsed laser-assisted synthesis of nano nickel(ii) oxide-anchored graphitic carbon nitride: Characterizations and their potential antibacterial/anti-biofilm applications
  118. Effects of nano-ZrSi2 on thermal stability of phenolic resin and thermal reusability of quartz–phenolic composites
  119. Benzaldehyde derivatives on tin electroplating as corrosion resistance for fabricating copper circuit
  120. Mechanical and heat transfer properties of 4D-printed shape memory graphene oxide/epoxy acrylate composites
  121. Coupling the vanadium-induced amorphous/crystalline NiFe2O4 with phosphide heterojunction toward active oxygen evolution reaction catalysts
  122. Graphene-oxide-reinforced cement composites mechanical and microstructural characteristics at elevated temperatures
  123. Gray correlation analysis of factors influencing compressive strength and durability of nano-SiO2 and PVA fiber reinforced geopolymer mortar
  124. Preparation of layered gradient Cu–Cr–Ti alloy with excellent mechanical properties, thermal stability, and electrical conductivity
  125. Recovery of Cr from chrome-containing leather wastes to develop aluminum-based composite material along with Al2O3 ceramic particles: An ingenious approach
  126. Mechanisms of the improved stiffness of flexible polymers under impact loading
  127. Anticancer potential of gold nanoparticles (AuNPs) using a battery of in vitro tests
  128. Review Articles
  129. Proposed approaches for coronaviruses elimination from wastewater: Membrane techniques and nanotechnology solutions
  130. Application of Pickering emulsion in oil drilling and production
  131. The contribution of microfluidics to the fight against tuberculosis
  132. Graphene-based biosensors for disease theranostics: Development, applications, and recent advancements
  133. Synthesis and encapsulation of iron oxide nanorods for application in magnetic hyperthermia and photothermal therapy
  134. Contemporary nano-architectured drugs and leads for ανβ3 integrin-based chemotherapy: Rationale and retrospect
  135. State-of-the-art review of fabrication, application, and mechanical properties of functionally graded porous nanocomposite materials
  136. Insights on magnetic spinel ferrites for targeted drug delivery and hyperthermia applications
  137. A review on heterogeneous oxidation of acetaminophen based on micro and nanoparticles catalyzed by different activators
  138. Early diagnosis of lung cancer using magnetic nanoparticles-integrated systems
  139. Advances in ZnO: Manipulation of defects for enhancing their technological potentials
  140. Efficacious nanomedicine track toward combating COVID-19
  141. A review of the design, processes, and properties of Mg-based composites
  142. Green synthesis of nanoparticles for varied applications: Green renewable resources and energy-efficient synthetic routes
  143. Two-dimensional nanomaterial-based polymer composites: Fundamentals and applications
  144. Recent progress and challenges in plasmonic nanomaterials
  145. Apoptotic cell-derived micro/nanosized extracellular vesicles in tissue regeneration
  146. Electronic noses based on metal oxide nanowires: A review
  147. Framework materials for supercapacitors
  148. An overview on the reproductive toxicity of graphene derivatives: Highlighting the importance
  149. Antibacterial nanomaterials: Upcoming hope to overcome antibiotic resistance crisis
  150. Research progress of carbon materials in the field of three-dimensional printing polymer nanocomposites
  151. A review of atomic layer deposition modelling and simulation methodologies: Density functional theory and molecular dynamics
  152. Recent advances in the preparation of PVDF-based piezoelectric materials
  153. Recent developments in tensile properties of friction welding of carbon fiber-reinforced composite: A review
  154. Comprehensive review of the properties of fly ash-based geopolymer with additive of nano-SiO2
  155. Perspectives in biopolymer/graphene-based composite application: Advances, challenges, and recommendations
  156. Graphene-based nanocomposite using new modeling molecular dynamic simulations for proposed neutralizing mechanism and real-time sensing of COVID-19
  157. Nanotechnology application on bamboo materials: A review
  158. Recent developments and future perspectives of biorenewable nanocomposites for advanced applications
  159. Nanostructured lipid carrier system: A compendium of their formulation development approaches, optimization strategies by quality by design, and recent applications in drug delivery
  160. 3D printing customized design of human bone tissue implant and its application
  161. Design, preparation, and functionalization of nanobiomaterials for enhanced efficacy in current and future biomedical applications
  162. A brief review of nanoparticles-doped PEDOT:PSS nanocomposite for OLED and OPV
  163. Nanotechnology interventions as a putative tool for the treatment of dental afflictions
  164. Recent advancements in metal–organic frameworks integrating quantum dots (QDs@MOF) and their potential applications
  165. A focused review of short electrospun nanofiber preparation techniques for composite reinforcement
  166. Microstructural characteristics and nano-modification of interfacial transition zone in concrete: A review
  167. Latest developments in the upconversion nanotechnology for the rapid detection of food safety: A review
  168. Strategic applications of nano-fertilizers for sustainable agriculture: Benefits and bottlenecks
  169. Molecular dynamics application of cocrystal energetic materials: A review
  170. Synthesis and application of nanometer hydroxyapatite in biomedicine
  171. Cutting-edge development in waste-recycled nanomaterials for energy storage and conversion applications
  172. Biological applications of ternary quantum dots: A review
  173. Nanotherapeutics for hydrogen sulfide-involved treatment: An emerging approach for cancer therapy
  174. Application of antibacterial nanoparticles in orthodontic materials
  175. Effect of natural-based biological hydrogels combined with growth factors on skin wound healing
  176. Nanozymes – A route to overcome microbial resistance: A viewpoint
  177. Recent developments and applications of smart nanoparticles in biomedicine
  178. Contemporary review on carbon nanotube (CNT) composites and their impact on multifarious applications
  179. Interfacial interactions and reinforcing mechanisms of cellulose and chitin nanomaterials and starch derivatives for cement and concrete strength and durability enhancement: A review
  180. Diamond-like carbon films for tribological modification of rubber
  181. Layered double hydroxides (LDHs) modified cement-based materials: A systematic review
  182. Recent research progress and advanced applications of silica/polymer nanocomposites
  183. Modeling of supramolecular biopolymers: Leading the in silico revolution of tissue engineering and nanomedicine
  184. Recent advances in perovskites-based optoelectronics
  185. Biogenic synthesis of palladium nanoparticles: New production methods and applications
  186. A comprehensive review of nanofluids with fractional derivatives: Modeling and application
  187. Electrospinning of marine polysaccharides: Processing and chemical aspects, challenges, and future prospects
  188. Electrohydrodynamic printing for demanding devices: A review of processing and applications
  189. Rapid Communications
  190. Structural material with designed thermal twist for a simple actuation
  191. Recent advances in photothermal materials for solar-driven crude oil adsorption
https://doi.org/10.1515/ntrev-2022-0143
Schlagwörter für diesen Artikel
magnetic ceramic ferrites; copper ferrite nanostructures; cytotoxicity evaluation; green chemistry; plant extracts
Creative Commons
BY 4.0

Artikel in diesem Heft

  1. Research Articles
  2. Theoretical and experimental investigation of MWCNT dispersion effect on the elastic modulus of flexible PDMS/MWCNT nanocomposites
  3. Mechanical, morphological, and fracture-deformation behavior of MWCNTs-reinforced (Al–Cu–Mg–T351) alloy cast nanocomposites fabricated by optimized mechanical milling and powder metallurgy techniques
  4. Flammability and physical stability of sugar palm crystalline nanocellulose reinforced thermoplastic sugar palm starch/poly(lactic acid) blend bionanocomposites
  5. Glutathione-loaded non-ionic surfactant niosomes: A new approach to improve oral bioavailability and hepatoprotective efficacy of glutathione
  6. Relationship between mechano-bactericidal activity and nanoblades density on chemically strengthened glass
  7. In situ regulation of microstructure and microwave-absorbing properties of FeSiAl through HNO3 oxidation
  8. Research on a mechanical model of magnetorheological fluid different diameter particles
  9. Nanomechanical and dynamic mechanical properties of rubber–wood–plastic composites
  10. Investigative properties of CeO2 doped with niobium: A combined characterization and DFT studies
  11. Miniaturized peptidomimetics and nano-vesiculation in endothelin types through probable nano-disk formation and structure property relationships of endothelins’ fragments
  12. N/S co-doped CoSe/C nanocubes as anode materials for Li-ion batteries
  13. Synergistic effects of halloysite nanotubes with metal and phosphorus additives on the optimal design of eco-friendly sandwich panels with maximum flame resistance and minimum weight
  14. Octreotide-conjugated silver nanoparticles for active targeting of somatostatin receptors and their application in a nebulized rat model
  15. Controllable morphology of Bi2S3 nanostructures formed via hydrothermal vulcanization of Bi2O3 thin-film layer and their photoelectrocatalytic performances
  16. Development of (−)-epigallocatechin-3-gallate-loaded folate receptor-targeted nanoparticles for prostate cancer treatment
  17. Enhancement of the mechanical properties of HDPE mineral nanocomposites by filler particles modulation of the matrix plastic/elastic behavior
  18. Effect of plasticizers on the properties of sugar palm nanocellulose/cinnamon essential oil reinforced starch bionanocomposite films
  19. Optimization of nano coating to reduce the thermal deformation of ball screws
  20. Preparation of efficient piezoelectric PVDF–HFP/Ni composite films by high electric field poling
  21. MHD dissipative Casson nanofluid liquid film flow due to an unsteady stretching sheet with radiation influence and slip velocity phenomenon
  22. Effects of nano-SiO2 modification on rubberised mortar and concrete with recycled coarse aggregates
  23. Mechanical and microscopic properties of fiber-reinforced coal gangue-based geopolymer concrete
  24. Effect of morphology and size on the thermodynamic stability of cerium oxide nanoparticles: Experiment and molecular dynamics calculation
  25. Mechanical performance of a CFRP composite reinforced via gelatin-CNTs: A study on fiber interfacial enhancement and matrix enhancement
  26. A practical review over surface modification, nanopatterns, emerging materials, drug delivery systems, and their biophysiochemical properties for dental implants: Recent progresses and advances
  27. HTR: An ultra-high speed algorithm for cage recognition of clathrate hydrates
  28. Effects of microalloying elements added by in situ synthesis on the microstructure of WCu composites
  29. A highly sensitive nanobiosensor based on aptamer-conjugated graphene-decorated rhodium nanoparticles for detection of HER2-positive circulating tumor cells
  30. Progressive collapse performance of shear strengthened RC frames by nano CFRP
  31. Core–shell heterostructured composites of carbon nanotubes and imine-linked hyperbranched polymers as metal-free Li-ion anodes
  32. A Galerkin strategy for tri-hybridized mixture in ethylene glycol comprising variable diffusion and thermal conductivity using non-Fourier’s theory
  33. Simple models for tensile modulus of shape memory polymer nanocomposites at ambient temperature
  34. Preparation and morphological studies of tin sulfide nanoparticles and use as efficient photocatalysts for the degradation of rhodamine B and phenol
  35. Polyethyleneimine-impregnated activated carbon nanofiber composited graphene-derived rice husk char for efficient post-combustion CO2 capture
  36. Electrospun nanofibers of Co3O4 nanocrystals encapsulated in cyclized-polyacrylonitrile for lithium storage
  37. Pitting corrosion induced on high-strength high carbon steel wire in high alkaline deaerated chloride electrolyte
  38. Formulation of polymeric nanoparticles loaded sorafenib; evaluation of cytotoxicity, molecular evaluation, and gene expression studies in lung and breast cancer cell lines
  39. Engineered nanocomposites in asphalt binders
  40. Influence of loading voltage, domain ratio, and additional load on the actuation of dielectric elastomer
  41. Thermally induced hex-graphene transitions in 2D carbon crystals
  42. The surface modification effect on the interfacial properties of glass fiber-reinforced epoxy: A molecular dynamics study
  43. Molecular dynamics study of deformation mechanism of interfacial microzone of Cu/Al2Cu/Al composites under tension
  44. Nanocolloid simulators of luminescent solar concentrator photovoltaic windows
  45. Compressive strength and anti-chloride ion penetration assessment of geopolymer mortar merging PVA fiber and nano-SiO2 using RBF–BP composite neural network
  46. Effect of 3-mercapto-1-propane sulfonate sulfonic acid and polyvinylpyrrolidone on the growth of cobalt pillar by electrodeposition
  47. Dynamics of convective slippery constraints on hybrid radiative Sutterby nanofluid flow by Galerkin finite element simulation
  48. Preparation of vanadium by the magnesiothermic self-propagating reduction and process control
  49. Microstructure-dependent photoelectrocatalytic activity of heterogeneous ZnO–ZnS nanosheets
  50. Cytotoxic and pro-inflammatory effects of molybdenum and tungsten disulphide on human bronchial cells
  51. Improving recycled aggregate concrete by compression casting and nano-silica
  52. Chemically reactive Maxwell nanoliquid flow by a stretching surface in the frames of Newtonian heating, nonlinear convection and radiative flux: Nanopolymer flow processing simulation
  53. Nonlinear dynamic and crack behaviors of carbon nanotubes-reinforced composites with various geometries
  54. Biosynthesis of copper oxide nanoparticles and its therapeutic efficacy against colon cancer
  55. Synthesis and characterization of smart stimuli-responsive herbal drug-encapsulated nanoniosome particles for efficient treatment of breast cancer
  56. Homotopic simulation for heat transport phenomenon of the Burgers nanofluids flow over a stretching cylinder with thermal convective and zero mass flux conditions
  57. Incorporation of copper and strontium ions in TiO2 nanotubes via dopamine to enhance hemocompatibility and cytocompatibility
  58. Mechanical, thermal, and barrier properties of starch films incorporated with chitosan nanoparticles
  59. Mechanical properties and microstructure of nano-strengthened recycled aggregate concrete
  60. Glucose-responsive nanogels efficiently maintain the stability and activity of therapeutic enzymes
  61. Tunning matrix rheology and mechanical performance of ultra-high performance concrete using cellulose nanofibers
  62. Flexible MXene/copper/cellulose nanofiber heat spreader films with enhanced thermal conductivity
  63. Promoted charge separation and specific surface area via interlacing of N-doped titanium dioxide nanotubes on carbon nitride nanosheets for photocatalytic degradation of Rhodamine B
  64. Elucidating the role of silicon dioxide and titanium dioxide nanoparticles in mitigating the disease of the eggplant caused by Phomopsis vexans, Ralstonia solanacearum, and root-knot nematode Meloidogyne incognita
  65. An implication of magnetic dipole in Carreau Yasuda liquid influenced by engine oil using ternary hybrid nanomaterial
  66. Robust synthesis of a composite phase of copper vanadium oxide with enhanced performance for durable aqueous Zn-ion batteries
  67. Tunning self-assembled phases of bovine serum albumin via hydrothermal process to synthesize novel functional hydrogel for skin protection against UVB
  68. A comparative experimental study on damping properties of epoxy nanocomposite beams reinforced with carbon nanotubes and graphene nanoplatelets
  69. Lightweight and hydrophobic Ni/GO/PVA composite aerogels for ultrahigh performance electromagnetic interference shielding
  70. Research on the auxetic behavior and mechanical properties of periodically rotating graphene nanostructures
  71. Repairing performances of novel cement mortar modified with graphene oxide and polyacrylate polymer
  72. Closed-loop recycling and fabrication of hydrophilic CNT films with high performance
  73. Design of thin-film configuration of SnO2–Ag2O composites for NO2 gas-sensing applications
  74. Study on stress distribution of SiC/Al composites based on microstructure models with microns and nanoparticles
  75. PVDF green nanofibers as potential carriers for improving self-healing and mechanical properties of carbon fiber/epoxy prepregs
  76. Osteogenesis capability of three-dimensionally printed poly(lactic acid)-halloysite nanotube scaffolds containing strontium ranelate
  77. Silver nanoparticles induce mitochondria-dependent apoptosis and late non-canonical autophagy in HT-29 colon cancer cells
  78. Preparation and bonding mechanisms of polymer/metal hybrid composite by nano molding technology
  79. Damage self-sensing and strain monitoring of glass-reinforced epoxy composite impregnated with graphene nanoplatelet and multiwalled carbon nanotubes
  80. Thermal analysis characterisation of solar-powered ship using Oldroyd hybrid nanofluids in parabolic trough solar collector: An optimal thermal application
  81. Pyrene-functionalized halloysite nanotubes for simultaneously detecting and separating Hg(ii) in aqueous media: A comprehensive comparison on interparticle and intraparticle excimers
  82. Fabrication of self-assembly CNT flexible film and its piezoresistive sensing behaviors
  83. Thermal valuation and entropy inspection of second-grade nanoscale fluid flow over a stretching surface by applying Koo–Kleinstreuer–Li relation
  84. Mechanical properties and microstructure of nano-SiO2 and basalt-fiber-reinforced recycled aggregate concrete
  85. Characterization and tribology performance of polyaniline-coated nanodiamond lubricant additives
  86. Combined impact of Marangoni convection and thermophoretic particle deposition on chemically reactive transport of nanofluid flow over a stretching surface
  87. Spark plasma extrusion of binder free hydroxyapatite powder
  88. An investigation on thermo-mechanical performance of graphene-oxide-reinforced shape memory polymer
  89. Effect of nanoadditives on the novel leather fiber/recycled poly(ethylene-vinyl-acetate) polymer composites for multifunctional applications: Fabrication, characterizations, and multiobjective optimization using central composite design
  90. Design selection for a hemispherical dimple core sandwich panel using hybrid multi-criteria decision-making methods
  91. Improving tensile strength and impact toughness of plasticized poly(lactic acid) biocomposites by incorporating nanofibrillated cellulose
  92. Green synthesis of spinel copper ferrite (CuFe2O4) nanoparticles and their toxicity
  93. The effect of TaC and NbC hybrid and mono-nanoparticles on AA2024 nanocomposites: Microstructure, strengthening, and artificial aging
  94. Excited-state geometry relaxation of pyrene-modified cellulose nanocrystals under UV-light excitation for detecting Fe3+
  95. Effect of CNTs and MEA on the creep of face-slab concrete at an early age
  96. Effect of deformation conditions on compression phase transformation of AZ31
  97. Application of MXene as a new generation of highly conductive coating materials for electromembrane-surrounded solid-phase microextraction
  98. A comparative study of the elasto-plastic properties for ceramic nanocomposites filled by graphene or graphene oxide nanoplates
  99. Encapsulation strategies for improving the biological behavior of CdS@ZIF-8 nanocomposites
  100. Biosynthesis of ZnO NPs from pumpkin seeds’ extract and elucidation of its anticancer potential against breast cancer
  101. Preliminary trials of the gold nanoparticles conjugated chrysin: An assessment of anti-oxidant, anti-microbial, and in vitro cytotoxic activities of a nanoformulated flavonoid
  102. Effect of micron-scale pores increased by nano-SiO2 sol modification on the strength of cement mortar
  103. Fractional simulations for thermal flow of hybrid nanofluid with aluminum oxide and titanium oxide nanoparticles with water and blood base fluids
  104. The effect of graphene nano-powder on the viscosity of water: An experimental study and artificial neural network modeling
  105. Development of a novel heat- and shear-resistant nano-silica gelling agent
  106. Characterization, biocompatibility and in vivo of nominal MnO2-containing wollastonite glass-ceramic
  107. Entropy production simulation of second-grade magnetic nanomaterials flowing across an expanding surface with viscidness dissipative flux
  108. Enhancement in structural, morphological, and optical properties of copper oxide for optoelectronic device applications
  109. Aptamer-functionalized chitosan-coated gold nanoparticle complex as a suitable targeted drug carrier for improved breast cancer treatment
  110. Performance and overall evaluation of nano-alumina-modified asphalt mixture
  111. Analysis of pure nanofluid (GO/engine oil) and hybrid nanofluid (GO–Fe3O4/engine oil): Novel thermal and magnetic features
  112. Synthesis of Ag@AgCl modified anatase/rutile/brookite mixed phase TiO2 and their photocatalytic property
  113. Mechanisms and influential variables on the abrasion resistance hydraulic concrete
  114. Synergistic reinforcement mechanism of basalt fiber/cellulose nanocrystals/polypropylene composites
  115. Achieving excellent oxidation resistance and mechanical properties of TiB2–B4C/carbon aerogel composites by quick-gelation and mechanical mixing
  116. Microwave-assisted sol–gel template-free synthesis and characterization of silica nanoparticles obtained from South African coal fly ash
  117. Pulsed laser-assisted synthesis of nano nickel(ii) oxide-anchored graphitic carbon nitride: Characterizations and their potential antibacterial/anti-biofilm applications
  118. Effects of nano-ZrSi2 on thermal stability of phenolic resin and thermal reusability of quartz–phenolic composites
  119. Benzaldehyde derivatives on tin electroplating as corrosion resistance for fabricating copper circuit
  120. Mechanical and heat transfer properties of 4D-printed shape memory graphene oxide/epoxy acrylate composites
  121. Coupling the vanadium-induced amorphous/crystalline NiFe2O4 with phosphide heterojunction toward active oxygen evolution reaction catalysts
  122. Graphene-oxide-reinforced cement composites mechanical and microstructural characteristics at elevated temperatures
  123. Gray correlation analysis of factors influencing compressive strength and durability of nano-SiO2 and PVA fiber reinforced geopolymer mortar
  124. Preparation of layered gradient Cu–Cr–Ti alloy with excellent mechanical properties, thermal stability, and electrical conductivity
  125. Recovery of Cr from chrome-containing leather wastes to develop aluminum-based composite material along with Al2O3 ceramic particles: An ingenious approach
  126. Mechanisms of the improved stiffness of flexible polymers under impact loading
  127. Anticancer potential of gold nanoparticles (AuNPs) using a battery of in vitro tests
  128. Review Articles
  129. Proposed approaches for coronaviruses elimination from wastewater: Membrane techniques and nanotechnology solutions
  130. Application of Pickering emulsion in oil drilling and production
  131. The contribution of microfluidics to the fight against tuberculosis
  132. Graphene-based biosensors for disease theranostics: Development, applications, and recent advancements
  133. Synthesis and encapsulation of iron oxide nanorods for application in magnetic hyperthermia and photothermal therapy
  134. Contemporary nano-architectured drugs and leads for ανβ3 integrin-based chemotherapy: Rationale and retrospect
  135. State-of-the-art review of fabrication, application, and mechanical properties of functionally graded porous nanocomposite materials
  136. Insights on magnetic spinel ferrites for targeted drug delivery and hyperthermia applications
  137. A review on heterogeneous oxidation of acetaminophen based on micro and nanoparticles catalyzed by different activators
  138. Early diagnosis of lung cancer using magnetic nanoparticles-integrated systems
  139. Advances in ZnO: Manipulation of defects for enhancing their technological potentials
  140. Efficacious nanomedicine track toward combating COVID-19
  141. A review of the design, processes, and properties of Mg-based composites
  142. Green synthesis of nanoparticles for varied applications: Green renewable resources and energy-efficient synthetic routes
  143. Two-dimensional nanomaterial-based polymer composites: Fundamentals and applications
  144. Recent progress and challenges in plasmonic nanomaterials
  145. Apoptotic cell-derived micro/nanosized extracellular vesicles in tissue regeneration
  146. Electronic noses based on metal oxide nanowires: A review
  147. Framework materials for supercapacitors
  148. An overview on the reproductive toxicity of graphene derivatives: Highlighting the importance
  149. Antibacterial nanomaterials: Upcoming hope to overcome antibiotic resistance crisis
  150. Research progress of carbon materials in the field of three-dimensional printing polymer nanocomposites
  151. A review of atomic layer deposition modelling and simulation methodologies: Density functional theory and molecular dynamics
  152. Recent advances in the preparation of PVDF-based piezoelectric materials
  153. Recent developments in tensile properties of friction welding of carbon fiber-reinforced composite: A review
  154. Comprehensive review of the properties of fly ash-based geopolymer with additive of nano-SiO2
  155. Perspectives in biopolymer/graphene-based composite application: Advances, challenges, and recommendations
  156. Graphene-based nanocomposite using new modeling molecular dynamic simulations for proposed neutralizing mechanism and real-time sensing of COVID-19
  157. Nanotechnology application on bamboo materials: A review
  158. Recent developments and future perspectives of biorenewable nanocomposites for advanced applications
  159. Nanostructured lipid carrier system: A compendium of their formulation development approaches, optimization strategies by quality by design, and recent applications in drug delivery
  160. 3D printing customized design of human bone tissue implant and its application
  161. Design, preparation, and functionalization of nanobiomaterials for enhanced efficacy in current and future biomedical applications
  162. A brief review of nanoparticles-doped PEDOT:PSS nanocomposite for OLED and OPV
  163. Nanotechnology interventions as a putative tool for the treatment of dental afflictions
  164. Recent advancements in metal–organic frameworks integrating quantum dots (QDs@MOF) and their potential applications
  165. A focused review of short electrospun nanofiber preparation techniques for composite reinforcement
  166. Microstructural characteristics and nano-modification of interfacial transition zone in concrete: A review
  167. Latest developments in the upconversion nanotechnology for the rapid detection of food safety: A review
  168. Strategic applications of nano-fertilizers for sustainable agriculture: Benefits and bottlenecks
  169. Molecular dynamics application of cocrystal energetic materials: A review
  170. Synthesis and application of nanometer hydroxyapatite in biomedicine
  171. Cutting-edge development in waste-recycled nanomaterials for energy storage and conversion applications
  172. Biological applications of ternary quantum dots: A review
  173. Nanotherapeutics for hydrogen sulfide-involved treatment: An emerging approach for cancer therapy
  174. Application of antibacterial nanoparticles in orthodontic materials
  175. Effect of natural-based biological hydrogels combined with growth factors on skin wound healing
  176. Nanozymes – A route to overcome microbial resistance: A viewpoint
  177. Recent developments and applications of smart nanoparticles in biomedicine
  178. Contemporary review on carbon nanotube (CNT) composites and their impact on multifarious applications
  179. Interfacial interactions and reinforcing mechanisms of cellulose and chitin nanomaterials and starch derivatives for cement and concrete strength and durability enhancement: A review
  180. Diamond-like carbon films for tribological modification of rubber
  181. Layered double hydroxides (LDHs) modified cement-based materials: A systematic review
  182. Recent research progress and advanced applications of silica/polymer nanocomposites
  183. Modeling of supramolecular biopolymers: Leading the in silico revolution of tissue engineering and nanomedicine
  184. Recent advances in perovskites-based optoelectronics
  185. Biogenic synthesis of palladium nanoparticles: New production methods and applications
  186. A comprehensive review of nanofluids with fractional derivatives: Modeling and application
  187. Electrospinning of marine polysaccharides: Processing and chemical aspects, challenges, and future prospects
  188. Electrohydrodynamic printing for demanding devices: A review of processing and applications
  189. Rapid Communications
  190. Structural material with designed thermal twist for a simple actuation
  191. Recent advances in photothermal materials for solar-driven crude oil adsorption
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 2.12.2025 von https://www.degruyterbrill.com/document/doi/10.1515/ntrev-2022-0143/html?lang=de
Button zum nach oben scrollen