Frontmatter

Articles in the same Issue

1. Frontmatter
2. B-pillar design optimization under a crushing load
3. Determination of residual stresses in metallic materials based on spherical indentation strain
4. Design analysis and manufacture of a variable load effective wear machine
5. Corrosion and wear resistance of the Al/steel dissimilar weld metals by using multi-principal filler materials
6. Impact toughness improvement of high boron-chromium steel by different isothermal heat treatment durations
7. Effect of different corrosive media on the corrosion resistance and mechanical properties of armor steel
8. Design and analysis of lattice structure applied humerus semi-prosthesis
9. Experimental and numerical investigation of flexural behavior of balsa core sandwich composite structures
10. Investigating microstructural evolution and wear resistance of AISI 316L stainless steel cladding deposited over mild steel using constant current GMAW and pulsed current GMAW processes
11. Dynamic recrystallization in friction stir welded AA2014 aluminium alloy joints to replace riveted joints
12. Application performance of bio-based plasticizer for PVC automotive interior material
13. Improving the wear resistance of the magnesium alloy WE43 by cold sprayed Ni–Al₂O₃ and Ni–Zn–Al₂O₃ coatings
14. Multi-material additive manufacturing: investigation of the combined use of ABS and PLA in the same structure
15. Material flow and mechanical properties of friction stir welded AA 5052-H32 and AA6061-T6 alloys with Sc interlayer
16. Corrigendum to: Relationship between extrusion temperature and corrosion resistance of magnesium alloy AZ61