Phase Composition and Structure of Fe-Mn Alloys Prepared by Mechanical Alloying from Elemental Powders

Articles in the same Issue

1. INHALT
2. Werner-Köster-Preis 1998
3. Aufsätze
4. On the Agglomeration of Interstitials during Irradiation with High-energy Particles
5. Application of TiN Particles for Grain Refinement of Aluminium
6. In Situ Study of Discontinuous Precipitation and Dissolution in an Al-22 at.% Zn Alloy
7. Dynamic Fracture of Glass and Single-crystalline Silicon
8. Measurement of the Profile and the Dihedral Angle of Grain Boundary Grooves by Atomic Force Microscopy
9. Analytical TEM Investigations of Laser-Deposited Fe/Al Multilayers
10. Rapidly Solidified CoTi Alloys as Brazing Foils for High-temperature Joining of Silicon Nitride Ceramic
11. A Thermodynamic Analysis of the Ta-W-C and the Ta-W-C-N Systems
12. Screening of NiAl-base Ni-Fe-Al Alloys for Structural High Temperature Applications and Development of a New Ni-30Fe-10Al-Cr Alloy
13. Morphology and Long Term Stability of NiI Ni Interconnections Based on Diffusion Soldering
14. Metallic Alloys with an Acoustic Impedance Gradient
15. Der Einfluß von Schädigung auf die adiabatische Fließkurve der Aluminiumlegierung AA7075 unter Schlagzugbeanspruchung
16. Comparison between Indirect Methods to Determine High-temperature Textures of Parent Phases
17. Correlation between the Specific Heat Capacity and the Elastic Moduli of Pure Metals
18. Phase Composition and Structure of Fe-Mn Alloys Prepared by Mechanical Alloying from Elemental Powders
19. Mitteilungen der Deutschen Gesellschaft für Materialkunde e. V.
20. Personen
21. Buchbesprechung
22. Ankündigungen
23. DGM Fortbildung
24. Tagungskalender
25. Impressum