Article
Licensed
Unlicensed
Requires Authentication
Formation and Interaction of & and a’ Martensites in an Fe-14 % Mn Alloy
-
Nurten Navruz
Published/Copyright:
April 22, 2021
Published Online: 2021-04-22
Published in Print: 1995-11-01
© 2021 by Walter de Gruyter Berlin/Boston
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- INHALT
- Aufsätze
- Precipitation in Some Dilute Al-Ge-Si Alloys
- Eigenspannungen in kurzfaserverstärkten metallischen Werkstoffen nach Abkühlung
- Formation and Interaction of & and a’ Martensites in an Fe-14 % Mn Alloy
- Improved Tensile Properties of Fe-0.6C-1.55i-0.8Mn Steel Through Austempering Coupled with Interrupted Quenching Treatment
- Grain Size Effect in Cold Roll Bonding of Copper-Steel and Brass-Steel Sandwiches
- Effect of Microstructure on the Impression Creep of Two-phase Titanium Aluminide
- Untersuchung des Erstarrungsvorgangs der gerichtet erstarrten Superlegierung CMSX 6
- Spannungsrißkorrosion niedriglegierter Chromstähle in Nitratlösungen
- The Isothermal Section of the Cu-rich Cu-Be-Cr ( <50 at.% Be) Ternary System at 500 °C
- Darken and Redlich-Kister Modelling of Liquid Metallic Phases The Pb-Sn-Biı Mixing Enthalpy
- Preparation, Structure and Physical Properties of Fe-, Co- and Ni-rich Melt-quenched Rıbbons Containing Zr or Hf Part Il: Electrical Transport Properties
- Auger Depth Profiling and Diffusion Measurements in Electrolytic Tinplate
- Mitteilungen der Deutschen Gesellschaft für Materialkunde e. V
- Personen
- Terminkalender
- Impressum
Articles in the same Issue
- INHALT
- Aufsätze
- Precipitation in Some Dilute Al-Ge-Si Alloys
- Eigenspannungen in kurzfaserverstärkten metallischen Werkstoffen nach Abkühlung
- Formation and Interaction of & and a’ Martensites in an Fe-14 % Mn Alloy
- Improved Tensile Properties of Fe-0.6C-1.55i-0.8Mn Steel Through Austempering Coupled with Interrupted Quenching Treatment
- Grain Size Effect in Cold Roll Bonding of Copper-Steel and Brass-Steel Sandwiches
- Effect of Microstructure on the Impression Creep of Two-phase Titanium Aluminide
- Untersuchung des Erstarrungsvorgangs der gerichtet erstarrten Superlegierung CMSX 6
- Spannungsrißkorrosion niedriglegierter Chromstähle in Nitratlösungen
- The Isothermal Section of the Cu-rich Cu-Be-Cr ( <50 at.% Be) Ternary System at 500 °C
- Darken and Redlich-Kister Modelling of Liquid Metallic Phases The Pb-Sn-Biı Mixing Enthalpy
- Preparation, Structure and Physical Properties of Fe-, Co- and Ni-rich Melt-quenched Rıbbons Containing Zr or Hf Part Il: Electrical Transport Properties
- Auger Depth Profiling and Diffusion Measurements in Electrolytic Tinplate
- Mitteilungen der Deutschen Gesellschaft für Materialkunde e. V
- Personen
- Terminkalender
- Impressum