Mechanical Properties of Ball-milled Nanoand Microcrystalline (Ni_x Fe_1-x)Al Alloys

Articles in the same Issue

1. INHALT
2. Aufsätze
3. Thermodynamics of the Al-Sb System Determined by Vapour Pressure Measurements
4. Determination of the Enthalpy of Mixing of Liquid Aluminum-Copper-Magnesium Alloys
5. Thermodynamische Modellierung der Ausscheidungshärtung in Edelmetall-Legierungssystemen
6. The Fe-Zn-Mn System at 450 °C
7. Morphologies in Directionally Solidified Copper-Manganese Alloys with Compositions Near the Melting Point Minimum
8. Preparation, Structure and Physical Properties of Fe-, Co- and Ni-rich Melt-quenched Ribbons Containing Zr or Hf Part I: Preparation Details and Structural Characterization
9. Mechanical Properties of Ball-milled Nanoand Microcrystalline (Ni_x Fe_1-x)Al Alloys
10. Subgrain Formation and Subgrain Boundary Migration in Al-5Mg during High Temperature Deformation in the Range of Class A Behaviour in Comparison with Pure Aluminium
11. The Effects of Carbon and Silicon on Structure and Properties of an Fe-27Cr-15Ni-N Alloy at 1250 °C
12. Enhanced Superplasticity in High Strength Ti Alloys
13. Mitteilungen der Deutschen Gesellschaft für Materialkunde e. V.
14. Personen
15. Terminkalender
16. Impressum