Zusammenhang zwischen Gefüge und mechanischen Eigenschaften der Legierung Ti-4Al-4Mo-2Sn-0.5Si

Articles in the same Issue

1. Titelei
2. Contents / Inhaltsverzeichnis
3. Field Ion Microscopy and Atom Probing of Guinier Preston Zones and y″ Precipitates in Cu-2.1 wt.% Be
4. Diffusion Coefficient of Oxygen in α-Iron Determined by Internal Oxidation Technique
5. A Microstructural Study of Rapidly Quenched Al-Zr Alloys
6. Beitrag zur Frage nach der Assoziatbildung in flüssigen Antimon-Zink-Legierungen
7. Thermodynamic Investigation on Manganese-Germanium Alloys
8. Crystallographic Data and Chemical Compositions of Aluminium-Rich Al-Fe Intermetallic Phases
9. Effect of Controlled Rolling on the Ferrite-Pearlite Transformation in a Low-Carbon Nb Steel
10. The Alloy System Copper-Zirconium
11. Fundamentals and Some Applications of Imaging Inhomogeneous X-Ray Reflectivity from Polycrystalline Samples
12. Released Energy During Heating of Two Deformed Amorphous Alloys of the Cu-Zr System
13. Zusammenhang zwischen Gefüge und mechanischen Eigenschaften der Legierung Ti-4Al-4Mo-2Sn-0.5Si