Design and Development of Low-Cost Makhana Grading and Roasting Machine
-
Vishal Kumar
,
Dinesh Rajak
Abstract
The currently available technology of Makhana processing is not only indigenous and manual but also cumbersome and painstaking. The process involves handling of hot roasted seeds which require two to three laborers to process 8–9 kg of popped Makhana per day. With the view to mechanize the unit operation involved in Makhana processing, grading and roasting machine were designed and developed. Grader was developed based on engineering properties of Makhana while the roaster was designed based on preliminary experiments for Makhana, i.e. shell breaking force at different temperatures and for varying residence time. The grader performed best at feed rate of 20 kg/h with grading effectiveness of 0.99, 0.955 and 0.95 for grade 1, grade 2 and grade 3 Makhana seeds respectively. The developed roasting machine worked satisfactorily with 100% popping efficiency at machine capacity around 23.0 kg/h. The residence time of seeds in the roaster was 2.6 min and the average temperature of roasted seeds of grade 1, grade 2, grade 3 was found to be 271.33°C, 281.1°C and 280.7°C respectively.
References
1. JhaSN, PatilRT. Status of post-harvest technology of Makhana in India. Indian Food Ind2009;28:42–8.Suche in Google Scholar
2. JhaSN, PrasadS. Determination of processing conditions for gorgon nut (Euryale ferox). J Agric Eng Res1999;63:103–12.10.1006/jaer.1996.0012Suche in Google Scholar
3. ChopraAS. Medicine across cultures: history and practice of medicine in non-western cultures. Norwell, MA: Kluwer Academic Publishers, 2003.Suche in Google Scholar
4. GovindarajanR, VijayakumarM, PushpangadanP. Antioxidant approach to disease management and the role of ‘Rasayana’ herbs of ayurveda. J Ethnopharmacol2005;99:165–78.10.1016/j.jep.2005.02.035Suche in Google Scholar
5. MehtaBK, SharmaMK. Development of technology for Makhana processing. J Appl Biol2007;17:46–8.Suche in Google Scholar
6. JhaSN, PhysicalPS. Thermal properties of gorgon nut. J Food Proc Eng1993;16:237–345.10.1111/j.1745-4530.1993.tb00319.xSuche in Google Scholar
7. BalaBK, IslamMN, AhsanullahMA, SamadMA. Physical and thermal properties of rough rice. J Agric Eng ISAE1987;24:47–54.Suche in Google Scholar
8. MohseninNN. Thermal properties of foods and agricultural material. New York: Gordon Breach Science Publishers, 1980.Suche in Google Scholar
9. AOAC. Official methods of analysis, 16th ed. Washington, DC: Association of Official Analytical Chemists, 1995.Suche in Google Scholar
10. ChukwuO, AkandeFB. Development of an apparatus for measuring angle of repose of agricultural materials. Assumption Univ J Technol2007;11:62–6.Suche in Google Scholar
11. MingjinY, PeixiangH, LingY, ExperimentalQL. Research on dynamic friction coefficients of coated rice seeds. J Agric Mechanization Asia Africa Latin America2003;34:18–20.Suche in Google Scholar
12. EsrefI, HalilU. Moisture-dependent physical properties of white speckled red kidney bean grains. J Food Eng2007;82:209–16.10.1016/j.jfoodeng.2007.02.012Suche in Google Scholar
13. JhaSN, PrasadS. Post-harvest technology of gorgon nut(chapter 26). In: MishraRK, JhaVN, DehadraiPV, editors. Makhana. New Delhi: Indian Council of Agricultural Research, 2003.Suche in Google Scholar
14. JhaN. Physical and hygroscopic properties of Makhana. J Agric Eng Res1999;72:145–50.10.1006/jaer.1998.0356Suche in Google Scholar
15. OmobuwajoOT, AkandeAE, SannAL. Selected physical, mechanical and aerodynamic properties of African breadfruit (Treculia africana) seeds. J Food Eng1999;40:241–4.10.1016/S0260-8774(99)00060-6Suche in Google Scholar
16. HeidarbeigiK, AhmadiH, KheiralipourK, TabatabaeefarA. Some physical and mechanical properties of Khinjuk. Pak J Nutr2009;8:74–7.10.3923/pjn.2009.74.77Suche in Google Scholar
17. OmrePK, SaxenaRP. Design and development of multi-fruit grader. J Agric Mechanization Asia Africa Latin America2003;34:39–52.Suche in Google Scholar
18. ZhouSZ, LiuCX, JiaHY, LvZP, SunZX. Advances in product development and reliability-design and research of large-inclination screw conveyor angle changing test equipment. Adv Mater Res2012;544:99–104.10.4028/www.scientific.net/AMR.544.99Suche in Google Scholar
19. SinghKK, SahayKM. Unit operation of agricultural processing. New Delhi: Vikas Publishing House, 1994.Suche in Google Scholar
20. SpinvakovskyA, DyachkovV. Conveyors and relatedequipment. Moscow: Peace Publishers, 1972.Suche in Google Scholar
©2014 by De Gruyter
Artikel in diesem Heft
- Frontmatter
- Grinding Characteristics of Black Soybeans (Glycine max) at Varied Moisture Contents: Particle Size, Energy Consumption, and Grinding Kinetics
- Design and Development of Low-Cost Makhana Grading and Roasting Machine
- Investigation of Consecutive Fouling and Cleaning Cycles of Ultrafiltration Membranes Used for Whey Processing
- Kinetic Models of Evaporation and Total Phenolics Degradation during Pomegranate Juice Concentration
- Predicting Sorption Isotherms and Net Isosteric Heats of Sorption of Maize Grains at Different Temperatures
- Estimating Some Physical Properties of Sour and Sweet Cherries Based on Combined Image Processing and AI Techniques
- Functional Properties of Re-fabricated Rice as Affected by Die During Extrusion Process
- Isolation and Characterization of Corncob Cellulose Fibers using Microwave-Assisted Chemical Treatments
- Physical Properties of Red Guava (Psidium guajava L.) Pulp as Affected by Soluble Solids Content and Temperature
- Levels of Fluoride in the Ethiopian and Imported Black Tea (Camellia sinensis) Infusions Prepared in Tap and Fluoride-Rich Natural Waters
- Process Optimization and Quality Analysis of Carambola (Averrhoa carambola L.) Wine
- Physical Properties of Gluten-Free Bread Made of Corn and Chickpea Flour
- In Vitro Anti-tumor Effects of Chemically Modified Polysaccharides from Cherokee Rose Fruit
- Optimization of Ohmic Heating of Fish Using Response Surface Methodology
- Response Surface Modeling for Optimization of Textural and Color Characteristics of Dried Grapes
- Response Surface Analysis for Preparation of Modified Flours using Twin Screw Extrusion Cooking
- Modeling the Effects of the Quantity and Particle Size of Wheat Bran on Some Properties of Bread Dough using Response Surface Methodology
- Testing of a Condensation-type Heat Pump System for Low-temperature Drying Applications
- Comparison of Chemical, Textural and Organoleptic Properties of Pastry Sheets with Two Different Additives
Artikel in diesem Heft
- Frontmatter
- Grinding Characteristics of Black Soybeans (Glycine max) at Varied Moisture Contents: Particle Size, Energy Consumption, and Grinding Kinetics
- Design and Development of Low-Cost Makhana Grading and Roasting Machine
- Investigation of Consecutive Fouling and Cleaning Cycles of Ultrafiltration Membranes Used for Whey Processing
- Kinetic Models of Evaporation and Total Phenolics Degradation during Pomegranate Juice Concentration
- Predicting Sorption Isotherms and Net Isosteric Heats of Sorption of Maize Grains at Different Temperatures
- Estimating Some Physical Properties of Sour and Sweet Cherries Based on Combined Image Processing and AI Techniques
- Functional Properties of Re-fabricated Rice as Affected by Die During Extrusion Process
- Isolation and Characterization of Corncob Cellulose Fibers using Microwave-Assisted Chemical Treatments
- Physical Properties of Red Guava (Psidium guajava L.) Pulp as Affected by Soluble Solids Content and Temperature
- Levels of Fluoride in the Ethiopian and Imported Black Tea (Camellia sinensis) Infusions Prepared in Tap and Fluoride-Rich Natural Waters
- Process Optimization and Quality Analysis of Carambola (Averrhoa carambola L.) Wine
- Physical Properties of Gluten-Free Bread Made of Corn and Chickpea Flour
- In Vitro Anti-tumor Effects of Chemically Modified Polysaccharides from Cherokee Rose Fruit
- Optimization of Ohmic Heating of Fish Using Response Surface Methodology
- Response Surface Modeling for Optimization of Textural and Color Characteristics of Dried Grapes
- Response Surface Analysis for Preparation of Modified Flours using Twin Screw Extrusion Cooking
- Modeling the Effects of the Quantity and Particle Size of Wheat Bran on Some Properties of Bread Dough using Response Surface Methodology
- Testing of a Condensation-type Heat Pump System for Low-temperature Drying Applications
- Comparison of Chemical, Textural and Organoleptic Properties of Pastry Sheets with Two Different Additives
