Application scenario evaluation of modified converter for quadratic Boost high gain DC-DC: taking the constant off time control mode as an example
-
Jing Fan
and
Ming Kang
Abstract
In recent years, due to the energy crisis and serious environmental problems, the use and development of new energy has become the focus of research. Therefore, the application of new energy technologies has increased the demand for direct current to direct current (DC-DC) converters. The improvement of converter capability effectively enhances the functions of DC-DC converters, which makes it easy for secondary converters to meet the requirements of voltage gain, and expands the input voltage range of DC-DC converters, thereby having a good prospect in new energy applications. However, due to the many drawbacks of the quadratic Boost converter, such as pressure rise limitation, high switching stress, in order to reduce the working pressure of the improved quadratic Boost high gain converter and improve its operating performance, it is necessary to optimize it. Based on the application scenario of an modified converter for quadratic Boost high gain DC-DC, and taking the constant off time control method as an example, this paper conducted research to accurately recognize the current status of the converter and improve the utilization efficiency of the converter. In this paper, four groups of traditional converters and two types of improved quadratic Boost high gain DC-DC converters were selected as experimental objects for comparative analysis of images and data. The results showed that the conversion efficiency of the constant off time control method in the modified DC-DC converter based on quadratic high gain was 7.03 % higher than that of the traditional converter, while also improving the conversion efficiency of voltage gain and reducing switching stress, with higher safety. This indicated that the improved DC-DC converter with secondary high gain has better effects and wider application scenarios, thereby better serving new energy systems.
Funding source: Education Department of Shaanxi Provincial Government
Award Identifier / Grant number: 21JK0874
Funding source: National Innovation and Entrepreneurship Project for College students
Award Identifier / Grant number: S202011080023
-
Author contributions: All the authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.
-
Research funding: This work was supported by Education Department of Shaanxi Provincial Government (21JK0874), National Innovation and Entrepreneurship Project for College students (S202011080023).
-
Conflict of interest statement: The authors declare no conflicts of interest regarding this article.
References
1. Rajesh, P, Shajin, FH, Kommula, BN. An efficient integration and control approach to increase the conversion efficiency of high-current low-voltage DC/DC converter. Energy Syst 2022;13:939–58. https://doi.org/10.1007/s12667-021-00452-w.Search in Google Scholar
2. Liang, W, Hu, X, Chen, H, Wu, G, Zhang, M, Tan, G. High-voltage-gain DC-DC converter with three-winding coupled inductor. Chin J Electr Eng 2019;5:10–23. https://doi.org/10.23919/cjee.2019.000002.Search in Google Scholar
3. Astaneh, PK. High gain multi-input DC-DC converter with combined phase-shift/PWM modulation for stand-alone applications. J Oper Autom Power Eng 2019;7:49–57.Search in Google Scholar
4. Mumtaz, F, Yahaya, NZ, Meraj, ST, Singh, B, Kannan, R, Ibrahim, O. Review on non-isolated DC-DC converters and their control techniques for renewable energy applications. Ain Shams Eng J 2021;12:3747–63. https://doi.org/10.1016/j.asej.2021.03.022.Search in Google Scholar
5. Dhimish, M, Schofield, N. Single-switch boost-buck DC-DC converter for industrial fuel cell and photovoltaics applications. Int J Hydrogen Energy 2022;47:1241–55. https://doi.org/10.1016/j.ijhydene.2021.10.097.Search in Google Scholar
6. Wang, Q, Wang, Y, Liu, X, Zhang, S, Guo, G. A soft-switching high gain DC–DC converter for renewable energy systems. Int J Electron 2022;109:553–75. https://doi.org/10.1080/00207217.2021.1914189.Search in Google Scholar
7. Mohseni, P, Hosseini, SH, Maalandish, M, Sabahi, M. Ultra‐high step‐up two‐input DC–DC converter with lower switching losses. IET Power Electron 2019;12:2201–13. https://doi.org/10.1049/iet-pel.2018.5924.Search in Google Scholar
8. Singh, AK. High voltage gain bidirectional DC-DC converters for supercapacitor assisted electric vehicles: a review. CPSS Trans Power Electron Appl 2022;7:386–98. https://doi.org/10.24295/cpsstpea.2022.00035.Search in Google Scholar
9. Pourjafar, S, Sedaghati, F, Shayeghi, H, Maalandish, M. High step‐up DC–DC converter with coupled inductor suitable for renewable applications. IET Power Electron 2019;12:92–101. https://doi.org/10.1049/iet-pel.2018.5414.Search in Google Scholar
10. Suresh, K, Parimalasundar, E. A novel dual-leg DC-DC converter for wide range DC-AC conversion. Automatika 2022;63:572–9. https://doi.org/10.1080/00051144.2022.2056809.Search in Google Scholar
11. Guo, Q. Multi-resonant DC-DC converter based on switched capacitor pre-voltage reduction. CPSS Trans Power Electron Appl 2022;7:421–31. https://doi.org/10.24295/cpsstpea.2022.00038.Search in Google Scholar
12. Vaghela, MA, Mulla, MA. A new non-isolated interleaved high step-up gain DC-DC converter with reduced voltage stress on switching devices. Int J Electron 2022;109:1591–617. https://doi.org/10.1080/00207217.2021.1972475.Search in Google Scholar
13. Hajiabadi, MK, Mosallanejad, A, Salemnia, A. Non‐isolated high step‐up DC/DC converter for low‐voltage distributed power systems based on the quadratic Boost converter. Int J Circ Theor Appl 2022;50:1946–64. https://doi.org/10.1002/cta.3234.Search in Google Scholar
14. Wei, Y. Analysis and design of function decoupling high voltage gain DC/DC converter. J Power Electron 2019;19:380–93.Search in Google Scholar
15. Yang, J. Dual-coupled inductor high gain DC/DC converter with ripple absorption circuit. J Power Electron 2019;19:1366–79.Search in Google Scholar
16. Kalahasthi, RB, Ramteke, MR, Suryawanshi, HM, Kothapalli, K. A single‐switch high‐gain DC–DC converter for photovoltaic applications. Int J Circ Theor Appl 2022;50:1194–215. https://doi.org/10.1002/cta.3205.Search in Google Scholar
© 2023 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Frontmatter
- Research Articles
- Intelligent identification algorithm and key point detection of abnormal vibration of transmission tower based on machine learning
- Design and development of power data service platform based on multi dimension
- Evaluation on power marketing decision evaluation based on Bayesian network
- Power monitoring data access control system based on BP neural network
- Investigation and application of key technologies of aggregated flash payment based on marketing blockchain in the context of massive distributed generation grid connection
- Research on RBF neural network adaptive control of three-point contactless measuring device for CNC roller grinder
- Measurement of surface vibration signal of 500 kV transformer and analysis of its frequency characteristics
- Evaluation on key technologies for the construction of low-carbon index of electric power based on “double carbon”
- Application scenario evaluation of modified converter for quadratic Boost high gain DC-DC: taking the constant off time control mode as an example
- Efficiency of artificial intelligence automatic control system and data processing unit based on edge computing technology
- Design of mountain fire prevention monitoring system for transmission lines based on machine vision algorithms
Articles in the same Issue
- Frontmatter
- Research Articles
- Intelligent identification algorithm and key point detection of abnormal vibration of transmission tower based on machine learning
- Design and development of power data service platform based on multi dimension
- Evaluation on power marketing decision evaluation based on Bayesian network
- Power monitoring data access control system based on BP neural network
- Investigation and application of key technologies of aggregated flash payment based on marketing blockchain in the context of massive distributed generation grid connection
- Research on RBF neural network adaptive control of three-point contactless measuring device for CNC roller grinder
- Measurement of surface vibration signal of 500 kV transformer and analysis of its frequency characteristics
- Evaluation on key technologies for the construction of low-carbon index of electric power based on “double carbon”
- Application scenario evaluation of modified converter for quadratic Boost high gain DC-DC: taking the constant off time control mode as an example
- Efficiency of artificial intelligence automatic control system and data processing unit based on edge computing technology
- Design of mountain fire prevention monitoring system for transmission lines based on machine vision algorithms
