Article
Open Access
Investigation of Microstructure and Mechanical Properties of Friction Welded Aisi 316 and Ck 45 Steels
-
Sare Çelik
and
Ismail Ersozlu
Published/Copyright:
August 29, 2013
Received: 2013-5-6
Accepted: 2013-7-19
Published Online: 2013-8-29
Published in Print: 2014-4-1
©2014 by Walter de Gruyter Berlin/Boston
Articles in the same Issue
- Frontmatter
- Reduction of FeO in EAF Steelmaking Slag by Blends of Metallurgical Coke and Waste Polypropylene
- Effects of Lanthanum and Boron on the Microstructure and Magnetic Properties of Non-oriented Electrical Steels
- Effect of Reductants on Valuable Metals Separation and Recovery from Copper Cliff Converter Slag
- Microstructure and Tensile Deformation Features of Tandem Hot Rolling GH4169 Superalloy
- Intergranular Corrosion Susceptibility of Alloy 600 after Autogenous Tungsten Inert Gas and Laser Beam Welding using Electrochemical Technique
- Surface Modification of Polyetheretherketone by Helium/nitrogen and Nitrous Oxide Plasma Enhanced Chemical Vapour Deposition
- Optimization on Response Surface Methodology for Preparing V2O5 from Industrial Ammonium Metavanadate
- Investigation of Microstructure and Mechanical Properties of Friction Welded Aisi 316 and Ck 45 Steels
- Solid-fuel Rocket Engines: Layered Composite Materials Manufacturing and Thermal Diffusivity Measurements
- Effect of Tin on Hot Ductility and High-temperature Oxidation Behavior of 20CrMnTi Steel
- Solubility of Bismuth in Liquid Bi-S Based Free Cutting Steel
Keywords for this article
friction welding;
mechanical testing;
microstructure;
AISI 316 and Ck 45 steels
Creative Commons
BY-NC-ND 3.0
Articles in the same Issue
- Frontmatter
- Reduction of FeO in EAF Steelmaking Slag by Blends of Metallurgical Coke and Waste Polypropylene
- Effects of Lanthanum and Boron on the Microstructure and Magnetic Properties of Non-oriented Electrical Steels
- Effect of Reductants on Valuable Metals Separation and Recovery from Copper Cliff Converter Slag
- Microstructure and Tensile Deformation Features of Tandem Hot Rolling GH4169 Superalloy
- Intergranular Corrosion Susceptibility of Alloy 600 after Autogenous Tungsten Inert Gas and Laser Beam Welding using Electrochemical Technique
- Surface Modification of Polyetheretherketone by Helium/nitrogen and Nitrous Oxide Plasma Enhanced Chemical Vapour Deposition
- Optimization on Response Surface Methodology for Preparing V2O5 from Industrial Ammonium Metavanadate
- Investigation of Microstructure and Mechanical Properties of Friction Welded Aisi 316 and Ck 45 Steels
- Solid-fuel Rocket Engines: Layered Composite Materials Manufacturing and Thermal Diffusivity Measurements
- Effect of Tin on Hot Ductility and High-temperature Oxidation Behavior of 20CrMnTi Steel
- Solubility of Bismuth in Liquid Bi-S Based Free Cutting Steel
