Acknowledgement

Articles in the same Issue

1. Original papers
2. Galactoglucomannan stabilization during the initial kraft cooking of Scots pine
3. A CP/MAS ¹³C-NMR study of cellulose fibril aggregation in eucalyptus dissolving pulps during drying and the correlation between aggregate dimensions and chemical reactivity
4. Characteristics and discrimination of five types of wood-plastic composites by FTIR spectroscopy combined with principal component analysis
5. Macro- and micromechanical characterization of wood-adhesive bonds exposed to alternating climate conditions
6. Viscoelasticity of aspen wood strands during hot pressing: Experimentation and modeling
7. Applying digital image correlation to wood strands: Influence of loading rate and specimen thickness
8. Influence of loading conditions on the measurement of mode I critical stress intensity factor for wood and medium-density fiberboard by the single-edge-notched tension test
9. Advancing the dynamic mechanical analysis of biomass: comparison of tensile-torsion and compressive-torsion wood DMA
10. Improvement of water resistance and dimensional stability of wood through titanium dioxide coating
11. Analysis of water vapour sorption of oleo-thermal modified wood of Acacia mangium and Endospermum malaccense by a parallel exponential kinetics model and according to the Hailwood-Horrobin model
12. Influence of chemical treatments on moisture-induced dimensional change and elastic modulus of earlywood and latewood
13. Measurement of internal stress in Radiata pine sapwood during drying using an improved online sensor
14. Mechanical potential of eco-OSB produced from durable and nondurable species and natural resins
15. Improvement of glued-in-rod joint system using compressed wooden dowel
16. Short note
17. On the long-term visco-elastic behaviour of polyethylene glycol (PEG) impregnated archaeological oak wood
18. Meetings
19. Meetings
20. Acknowledgement
21. Acknowledgement