Article
Publicly Available
Frontmatter
Published/Copyright:
November 3, 2018
Published Online: 2018-11-03
Published in Print: 2018-11-27
©2018 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Frontmatter
- Original Articles
- Deposition of xylan isolated from Pennisetum purpureum on fibres of Eucalyptus globulus and characterisation of the composition of the surface xylans by immunolabelling and enzymatic peeling
- Preparation and properties of pulp fibers treated with zinc oxide nanoparticles by in situ chemosynthesis
- Direct production of lignin nanoparticles (LNPs) from wood using p-toluenesulfonic acid in an aqueous system at 80°C: characterization of LNP morphology, size, and surface charge
- Effects of lignin in wood on moisture sorption and hygroexpansion tested under dynamic conditions
- Electrochemical oxidation of lignin for the production of value-added chemicals on Ni-Co bimetallic electrocatalysts
- Isolation and characterization of lignin from beech wood and chestnut sawdust for the preparation of lignin nanoparticles (LNPs) from wood industry side-streams
- Determination of pinene content in black liquor by solvent-assisted/pyrogallol-protected headspace gas chromatography (HS-GC)
- Review
- Dielectric barrier discharge (DBD) plasma pretreatment of lignocellulosic materials in air at atmospheric pressure for their improved wettability: a literature review
- Original Articles
- Surface chemical composition and roughness as factors affecting the wettability of thermo-mechanically modified oak (Quercus robur L.)
- Relationship between anatomy and shear strength in wood of Larix sibirica
Articles in the same Issue
- Frontmatter
- Original Articles
- Deposition of xylan isolated from Pennisetum purpureum on fibres of Eucalyptus globulus and characterisation of the composition of the surface xylans by immunolabelling and enzymatic peeling
- Preparation and properties of pulp fibers treated with zinc oxide nanoparticles by in situ chemosynthesis
- Direct production of lignin nanoparticles (LNPs) from wood using p-toluenesulfonic acid in an aqueous system at 80°C: characterization of LNP morphology, size, and surface charge
- Effects of lignin in wood on moisture sorption and hygroexpansion tested under dynamic conditions
- Electrochemical oxidation of lignin for the production of value-added chemicals on Ni-Co bimetallic electrocatalysts
- Isolation and characterization of lignin from beech wood and chestnut sawdust for the preparation of lignin nanoparticles (LNPs) from wood industry side-streams
- Determination of pinene content in black liquor by solvent-assisted/pyrogallol-protected headspace gas chromatography (HS-GC)
- Review
- Dielectric barrier discharge (DBD) plasma pretreatment of lignocellulosic materials in air at atmospheric pressure for their improved wettability: a literature review
- Original Articles
- Surface chemical composition and roughness as factors affecting the wettability of thermo-mechanically modified oak (Quercus robur L.)
- Relationship between anatomy and shear strength in wood of Larix sibirica