Analysis of tension and bending fracture behavior in moso bamboo (Phyllostachys pubescens) using synchrotron radiation micro-computed tomography (SRμCT)
-
Huanrong Liu
Abstract
Bamboo is a natural bio-composite material that is both tough and possesses excellent mechanical properties. Its delicate structure and fiber arrangements play an important role in the mechanical properties and the fracture performance of bamboo. In this study, the fracture behaviors of bamboo due to tensile strength and bending were investigated using synchrotron radiation micro-computed tomography and environmental scanning electron microscopy (ESEM). Both tension and bending tests revealed that fibers are the key factors for bearing extra load and impeding crack propagation. Crack paths were found to be different in bamboo strips with different fiber percentages, and the interface between pulled-out fiber bundles and fiber break (in helix breaks and shearing break) was observed to be typical fracture characteristics in tension. Moreover, advanced micro-matrix cracking, interface debonding, fiber bundle bridging and the splitting of cell wall layers were found to be important fracture characteristics in bending. Both in tension and bending, a reasonably weak interface appeared to be beneficial for improving fracture toughness of fiber-reinforced bamboo. Thus, it is clear that “fiber bridging” mechanisms and “shear-lag theory” are well exhibited in bamboo.
Funding source: National Natural Science Foundation of China
Award Identifier / Grant number: 31700493
Funding source: National Key Research & Development Program of China
Award Identifier / Grant number: 2016YFD0600905
Funding statement: This work was financially supported by the National Natural Science Foundation of China (NSFC, Funder Id: http://dx.doi.org/10.13039/501100001809, grant no. 31700493) and the National Key Research & Development Program of China (2016YFD0600905). The authors appreciate the Shanghai Synchrotron Radiation Facility for the technical service. The authors appreciate Biao Huang and Xiang Liu for the help to the figures.
Author contributions: All the authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.
Research funding: None declared.
Employment or leadership: None declared.
Honorarium: None declared.
References
Amada, S., Untao, S. (2001) Fracture properties of bamboo. Composites B: Eng. 32:451–459.10.1016/S1359-8368(01)00022-1Suche in Google Scholar
Amada, S., Ichikawa, Y., Munekata, T., Nagase, Y., Shimizu, H. (1997) Fiber texture and mechanical graded structure of bamboo. Composites B: Eng. 28B:13–20.10.1016/S1359-8368(96)00020-0Suche in Google Scholar
Baensch, F., Zauner, M., Sanabria, S.J., Sause, M.G.R, Pinzer, B.R., Brunner, A.J., Stampanoni, M., Niemz, P. (2015) Damage evolution in wood: synchrotron radiation micro-computed tomography (SRuCT) as a complementary tool for interpreting acoustic emission (AE) behavior. Holzforschung 69:1015–1025.10.1515/hf-2014-0152Suche in Google Scholar
Buffière, J.Y., Maire, E., Cloetens, P., Lormand, G., Fougères, R. (1999) Characterization of internal damage in a MMCP using X-ray synchrotron phase contrast microtomography. Acta Mater. 47:1613–1625.10.1016/S1359-6454(99)00024-5Suche in Google Scholar
Burgert, I., Frühmann, K., Keckes, J., Fratzl, P., Stanzl-Tschegg, S. (2003) Microtensile testing of wood fibers combined with video extensometry for efficient strain detection. Holzforschung 57:661–664.10.1515/HF.2003.099Suche in Google Scholar
Burgert, I., Frühmann, K., Keckes, J., Fratzl, P., Stanzl-Tschegg, S. (2004) Structure–function relationships of four compression wood types: micromechanical properties at the tissue and fibre level. Trees 18:480–485.10.1007/s00468-004-0334-ySuche in Google Scholar
Cloetens, P., Mache, R., Schlenker, M., Lerbs-Mache, S. (2006) Quantitative phase tomography of Arabidopsis seeds reveals intercellular void network. Proc. Natl. Acad. Sci. USA 103:14626–14630.10.1073/pnas.0603490103Suche in Google Scholar PubMed PubMed Central
Cosmi, F., Bernasconi, A. (2013) Micro-CT investigation on fatigue damage evolution in short fibre reinforced polymers. Compos. Sci. Technol. 79:70–76.10.1016/j.compscitech.2013.02.008Suche in Google Scholar
Dhondt, S., Vanhaeren, H., Denis, V.L., Cnudde, V., Inzé, D. (2010) Plant structure visualization by high-resolution X-ray computed tomography. Trends Plant Sci. 15:419–422.10.1016/j.tplants.2010.05.002Suche in Google Scholar PubMed
Fratzl, P., Weinkamer, R. (2007) Nature’s hierarchical materials. Prog. Mater. Sci. 52:1263–1334.10.1016/j.pmatsci.2007.06.001Suche in Google Scholar
Forsberg, F. X-ray Microtomography and Digital Volume Correlation for Internal Deformation and Strain Analysis. Lulea University of Technology, 2008.Suche in Google Scholar
Fuhr, M., Stührk, C., Münch, B., Schwarze, F.W.M.R., Schubert, M. (2012) Automated quantification of the impact of the wood-decay fungus Physisporinus vitreus on the cell wall structure of Norway spruce by tomographic microscopy. Wood Sci. Technol. 46:769–779.10.1007/s00226-011-0442-ySuche in Google Scholar
GB/T 15780-1995. Test methods for physical and mechanical properties of bamboo.Suche in Google Scholar
Hayakawa, Y., Hayakawa, K., Inagaki, M., Kaneda, T., Nakao, K., Nogami, K., Sakai, T., Sato, I., Takahashi, Y., Tanaka, T. (2013) Computed tomography for light materials using a monochromatic X-ray beam produced by parametric X-ray radiation. Nucl. Inst. Meth. Phys. Res. B 309:230–236.10.1016/j.nimb.2013.01.025Suche in Google Scholar
Jiang, Z.H. Bamboo and Rattan in the World. Liaoning Science and Technology Press, China, 2002.Suche in Google Scholar
Kaminuma, E., Yoshizumi, T., Wada, T., Matsui, M., Toyoda, T. (2008) Quantitative analysis of heterogeneous spatial distribution of Arabidopsis leaf trichomes using micro X-ray computed tomography. Plant J. 56:470–482.10.1111/j.1365-313X.2008.03609.xSuche in Google Scholar PubMed
Launey, M.E., Chen, P.Y., Mckittrick, J., Ritchie, R.O. (2010) Mechanistic aspects of the fracture toughness of elk antler bone. Acta Biomater. 6:1505–1514.10.1016/j.actbio.2009.11.026Suche in Google Scholar PubMed
Li, H.B., Shen, S.P. (2011) The mechanical properties of bamboo and vascular bundles. Mater. Res. Soc. 26:2749–2756.10.1557/jmr.2011.314Suche in Google Scholar
Liese, W. (1987) Research on bamboo. Wood Sci. Technol. 21:189–209.10.1007/BF00351391Suche in Google Scholar
Liese, W. (1998) The Anatomy of Bamboo Culms. Technical report, International Network for Bamboo and Rattan, Beijing.10.1163/9789004502468Suche in Google Scholar
Liu, H.R., Jiang, Z.H., Zhang, X.B., Liu, X.E., Sun, Z.J. (2014) Effect of fiber on tensile properties of moso bamboo. BioResources 9:6888–6898.10.15376/biores.9.4.6888-6898Suche in Google Scholar
Liu, H.R., Jiang, Z.H., Fei, B.H., Hse, C., Sun, Z.J. (2015) Tensile behaviour and fracture mechanism of moso bamboo (Phyllostachys pubescens). Holzforschung 69:47–52.10.1515/hf-2013-0220Suche in Google Scholar
Liu, H.R., Wang, X.Q., Zhang, X.B., Sun, Z.J., Jiang, Z.H. (2016) In situ detection of the fracture behaviour of moso bamboo (Phyllostachys pubescens) by scanning electron microscopy. Holzforschung 70:1183–1190.10.1515/hf-2016-0003Suche in Google Scholar
Mannes, D., Marone, F., Lehmann, E., Stampanoni, M., Niemz, P. (2010) Application areas of synchrotron radiation tomographic microscopy for wood research. Wood Sci. Technol. 44:67–84.10.1007/s00226-009-0257-2Suche in Google Scholar
Mayer, G. (2005) Rigid biological systems as models for synthetic composites. Science 310:1144–1147.10.1126/science.1116994Suche in Google Scholar
Mayo, S.C., Chen, F., Evans, R. (2010) Micron-scale 3D imaging of wood and plant microstructure using high-resolution X-ray phase-contrast microtomography. J. Struct. Biol. 171:182–188.10.1016/j.jsb.2010.04.001Suche in Google Scholar
Moghaddam, M.S., Bulcke, J.V., Wålinder, M.E.P., Claesson, P.M., Acker, J.V., Swerin, A. (2017) Microstructure of chemically modified wood using X-ray computed tomography in relation to wetting properties. Holzforschung 71:119–128.10.1515/hf-2015-0227Suche in Google Scholar
Peng, G.Y., Jiang, Z.H., Liu, X.E., Fei, B.H., Yang, S.M., Qin, D.Ch., Ren, H.Q., Yu, Y., Xie, H.L. (2014) Detection of complex vascular system in bamboo node by X-ray μCT imaging technique. Holzforschung 68:223–227.10.1515/hf-2013-0080Suche in Google Scholar
Ray, A.K., Mondal, S., Das, S.K., Ramachandrarao, P. (2005) Bamboo-A functionally graded composite-correlation between microstructure and mechanical strength. J. Mater. Sci. 40:5249–5253.10.1007/s10853-005-4419-9Suche in Google Scholar
Ritchie, R.O. (1988) Mechanisms of fatigue crack-propagation in metals, ceramics and composites: role of crack tip shielding. Mater. Sci. Eng. A 103:15–28.10.1016/0025-5416(88)90547-2Suche in Google Scholar
Salvo, L., Cloetens, P., Maire, E., Zabler, S., Blandin, J.J., Buffière, J.Y., Ludwig, W., Boller, E., Bellet, D., Josserond, C. (2003) X-ray micro-tomography an attractive characterisation technique in materials science. Nucl. Inst. Meth. Phys. Res. B 200:273–286.10.1016/S0168-583X(02)01689-0Suche in Google Scholar
Shen, F., Chen, R.C., Xiao, T.Q. (2011) GPU-based parallel computing for fast image reconstruction in micro CT. Nucl. Technol. 34:401–405.Suche in Google Scholar
Sippola, M., Frühmann, K. (2002) In situ longitudinal tensile tests of pine wood in an environmental scanning electron microscope. Holzforschung 56:669–675.10.1515/HF.2002.101Suche in Google Scholar
Steppe, K., Cnudde, V., Girard, C., Lemeur, R., Cnudde, J.P., Jacobs, P. (2004) Use of X-ray computed microtomography for non-invasive determination of wood anatomical characteristics. J. Struct. Biol. 148:11–21.10.1016/j.jsb.2004.05.001Suche in Google Scholar PubMed
Stock, S.R. (1999) X-ray microtomography of materials. Int. Mater. Rev. 44:141–164.10.1179/095066099101528261Suche in Google Scholar
Studart, A.R. (2012) Towards high-performance bioinspired composites. Adv. Mater. 24:5024–5044.10.1002/adma.201201471Suche in Google Scholar
Stuppy, W.H., Maisano, J.A., Colbert, M.W., Rudall, P.J., Rowe, T.B. (2003) Three-dimensional analysis of plant structure using high-resolution X-ray computed tomography. Trends Plant Sci. 8:2–6.10.1016/S1360-1385(02)00004-3Suche in Google Scholar
Sun, Y.H., Jiang, Z.H., Zhang, X.B., Sun, Z.J., Yang, X.M., Liu, H.R. (2018) The impact performance of bamboo oriented strand board and computed tomography technique for detecting internal damage. BioResources 13:6707–6721.10.15376/biores.13.3.6707-6721Suche in Google Scholar
Taylor, A., Plank, B., Standfest, G., Petutschnigg, A. (2013) Beech wood shrinkage observed at the microscale by a time series of X-ray computed tomographs (μXCT). Holzforschung 67:201–205.10.1515/hf-2012-0100Suche in Google Scholar
Trtik, P., Dual, J., Keunecke, D., Mannes, D., Niemz, P., Stähli, P., Kaestner, A., Groso, A., Stampanoni, M. (2007) 3D imaging of microstructure of spruce wood. J. Struct. Biol. 159:46–55.10.1016/j.jsb.2007.02.003Suche in Google Scholar PubMed
Tukiainen, P., Hughes, M. (2016) The cellular level mode I fracture behavior of spruce and birch in the RT crack propagation system. Holzforchung 70:157–165.10.1515/hf-2014-0297Suche in Google Scholar
Wang, M.Y., Zimmermann, E.A., Riedel, C., Busseb, B., Li, S.M., Silberschmidt, V.V. (2017) Effect of micro-morphology of cortical bone tissue on fracture toughness and crack propagation. Procedia Structural Integrity 6:64–68.10.1016/j.prostr.2017.11.010Suche in Google Scholar
Wang, Q.P., Fei, B.H., Jiang, M.L., Liu, X.E., Yang, S.M. (2018) Hydrothermal aging evaluation method of recombinant bamboo based on X-ray computed tomography technology. Acta Materiae Compositae Sinica 35:989–998.Suche in Google Scholar
Wegst, U.G.K., Ashby, M.F. (2004) The mechanical efficiency of natural materials. Philos. Mag. 84:2167–2181.10.1080/14786430410001680935Suche in Google Scholar
Withers, P.J., Preuss, M. (2012) Fatigue and damage in structural materials studied by X-Ray tomography. Annu. Rev. Mater. Res. 42:81–103.10.1146/annurev-matsci-070511-155111Suche in Google Scholar
©2019 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Original Articles
- Analysis of tension and bending fracture behavior in moso bamboo (Phyllostachys pubescens) using synchrotron radiation micro-computed tomography (SRμCT)
- Water vapour sorption properties of thermally modified and pressurised hot-water-extracted wood powder
- Artificially aged spruce and beech wood surfaces reactivated using FE-DBD atmospheric plasma
- Evaluation of ring-5 structures of guaiacyl lignin in Ginkgo biloba L. using solid- and liquid-state 13C NMR difference spectroscopy
- A study of the physico-chemical properties of dried maritime pine resin to better understand the exudation process
- Assessing cellulose dissolution efficiency in solvent systems based on a robust experimental quantification protocol and enthalpy data
- Short Notes
- Evaluation of moisture diffusion in lignocellulosic biomass in steady and unsteady states by a dynamic vapor sorption apparatus
- On tylosis ultrastructure in Quercus cerris L.
- Annual Reviewer Acknowledgement
- Reviewer acknowledgement Holzforschung volume 73 (2019)
Artikel in diesem Heft
- Frontmatter
- Original Articles
- Analysis of tension and bending fracture behavior in moso bamboo (Phyllostachys pubescens) using synchrotron radiation micro-computed tomography (SRμCT)
- Water vapour sorption properties of thermally modified and pressurised hot-water-extracted wood powder
- Artificially aged spruce and beech wood surfaces reactivated using FE-DBD atmospheric plasma
- Evaluation of ring-5 structures of guaiacyl lignin in Ginkgo biloba L. using solid- and liquid-state 13C NMR difference spectroscopy
- A study of the physico-chemical properties of dried maritime pine resin to better understand the exudation process
- Assessing cellulose dissolution efficiency in solvent systems based on a robust experimental quantification protocol and enthalpy data
- Short Notes
- Evaluation of moisture diffusion in lignocellulosic biomass in steady and unsteady states by a dynamic vapor sorption apparatus
- On tylosis ultrastructure in Quercus cerris L.
- Annual Reviewer Acknowledgement
- Reviewer acknowledgement Holzforschung volume 73 (2019)
