Tensile strength of handsheets prepared with macerated fibres from solid wood modified with cross-linking agents

References

Bollmus, S., Rademacher, P., Krause, A., Militz, H. (2010) Material evaluation and product performances of beech wood modification with 1,3-dimethylol-4,5-dihydroxyethylenurea (DMDHEU). In: Proceedings 5th European Conference on Wood Modification, Riga, Latvia. pp. 15–22.Search in Google Scholar

Burmester, A. (1967) Tests for wood treatment with monomeric gas of formaldehyde using gamma rays. Holzforschung 21:13–20.10.1515/hfsg.1967.21.1.13Search in Google Scholar

EN 84 (1997) Wood preservatives – accelerated ageing of treated wood prior to biological testing – leaching procedure. European Committee for Standardisation (CEN), Brussels, Belgium.Search in Google Scholar

Evans, P.D., Banks, W.B. (1988) Degradation of wood surfaces by water. Changes in mechanical properties of thin wood strips. Holz Roh- Werkst. 46:427–435.10.1007/BF02608208Search in Google Scholar

Franklin, G.L. (1945) Preparation of thin sections of synthetic resins and wood-resin composites, and a new macerating method for wood. Nature 155:51.10.1038/155051a0Search in Google Scholar

Fujimura, T., Okamoto, S. (1961) On the acetalization of regenerated cellulose with dialdehydes. J. Appl. Polym. Sci. 51:173–183.10.1002/pol.1961.1205115510Search in Google Scholar

Hill, C.A.S. Wood Modification, Chemical, Thermal and Other Processes. Wiley, Chichester, 2006.10.1002/0470021748Search in Google Scholar

Hosseinpourpia, R., Adamopoulos, S., Mai, C. (2015) Tensile strength of handsheets from recovered fibres treated with N-methylol melamine (NMM) and 1,3-dimethylol-4,5-dihydroxyethyleneurea (DMDHEU). J. Appl. Polym. Sci. 132(3), DOI: 10.1002/app.41290.10.1002/app.41290Search in Google Scholar

ISO 5269-2. Pulps – preparation of laboratory sheets for physical testing. Part 2: rapid-Köthen method. International Organization for Standardization, Geneva, Switzerland, 2004.Search in Google Scholar

ISO 1924-3. Paper and board – determination of tensile properties. Part 3: constant rate of elongation method (100 mm/min). International Organization for Standardization, Geneva, Switzerland, 2005.Search in Google Scholar

Kielmann, B.C., Militz, H., Adamopoulos, S., Mai, C. (2013) Strength changes in ash, beech and maple wood modified with a N-methylol melamine compound and a metal complex dye. Wood Res. 58:343–350.Search in Google Scholar

Klüppel, A., Mai, C. (2012) Effect of lignin and hemicelluloses on the tensile strength of micro-veneers determined at finite span and zero span. Holzforschung 66:493–496.10.1515/hf.2011.173Search in Google Scholar

Law, K.N., Garceau, J.J., Koran, Z. (1977) Measurement of intra-increment tensile-strength by using a zero-span technique. Wood Sci. 10:42–48.Search in Google Scholar

Mai, C., Verma, P., Xie, Y., Dyckmans, J., Militz, H. (2009) Mode of action of DMDHEU treatment against wood decay by white and brown rot fungi. In: Proceedings 4th European Conference on Wood Modification, Stockholm, Sweden. pp. 45–52.Search in Google Scholar

Militz, H. (1993) Treatment of timber with water soluble dimethylol resins to improve their dimensional stability and durability. Wood Sci. Technol. 27:347–355.10.1007/BF00192221Search in Google Scholar

Nicholas, D.D., Williams, A.D. (1987) Dimensional stabilization of wood with dimethylol compounds. International Research Group on Wood Preservation, IRG/WP3412.Search in Google Scholar

Petersen, H. (1968) Beziehungen zwischen chemischer Konstitution, Hydrolysenbestädigkeit und Gleichgewichtslagen von N-Methylolverbindungen. 3. Mitt. Textilveredelung 3:160–179.Search in Google Scholar

Petersen, H. (1973) Wechselwirkung von Vernetzern und Katalysatoren in der Hochveredlung. 10. Mitt. Melliand Textilber. 54:415–418.Search in Google Scholar

Ringman, R., Pilgård, A., Brischke, C., Richter, K. (2014) Mode of action of brown rot decay resistance in modified wood: a review. Holzforschung 68:239–246.10.1515/hf-2013-0057Search in Google Scholar

Rowell, R.M. (1998) Property enhanced natural fibre composite materials based on chemical modification. In: Science and Technology of Polymers and Advanced Materials. Eds. Prasad, P.N., Mark, J.E., Kandil, S.H., Kafafi, Z.H. Plenum, New York. pp. 717–732.10.1007/978-1-4899-0112-5_63Search in Google Scholar

Rowell, R.M., Simonson, R., Hess, S., Plackett, D.V., Cronshaw, D., Dunningham, E.A. (1994) Acetyl distribution in acetylated whole wood and reactivity of isolated wood cell-wall components to acetic anhydride. Wood Fiber Sci. 26:11–18.Search in Google Scholar

Rys, P., Zollinger, H. (1969) Zur Interpretation der Säure- und Basenkatalyse bei N-Methylol-Reaktionen. Textilveredlung 4:895–904.Search in Google Scholar

Som, N.C., Mukherjee, A.K. (1989) Chemical bond formation in crosslinking reaction between jute fibre and dimethyloldihydroxyethylene urea. Indian J. Text. Res. 14:45–49.Search in Google Scholar

T 231 cm-96 (1996) Zero-span breaking strength of pulp (dry zero-span tensile). US Technical Association of Pulp and Paper Industry TAPPI, Atlanta, GA.Search in Google Scholar

Vail, S.L., Pierce, A.G. (1973) Chemical and physical properties of cotton modified by N-methylol agents. IV. Release of formaldehyde. Text. Res. J. 43:294–299.10.1177/004051757304300507Search in Google Scholar

Videlov, C.L. (1989) Biological degradation resistance of pine wood treated with dimethylol compounds. International Research Group on Wood Preservation, IRG/WP 3528.Search in Google Scholar

Weaver, J.W. (1960) Dimensional stabilization of wood with aldehydes and related compounds. Forest Prod. J. 10:306–310.Search in Google Scholar

Winandy, J.E., Rowell, R.M. (1984) The chemistry of wood strength. In: The Chemistry of Solid Wood. Ed. Rowell, R.M. ACS Sym Series 208, Washington, DC. pp. 211–255.10.1021/ba-1984-0207.ch005Search in Google Scholar

Xiao, Z., Xie, Y., Militz, H., Mai, C. (2010a) Effect of glutaraldehyde on water related properties of solid wood. Holzforschung 64:483–488.10.1515/hf.2010.087Search in Google Scholar

Xiao, Z., Xie, Y., Militz, H., Mai, C. (2010b) Effects of modification with glutaraldehyde on the mechanical properties of wood. Holzforschung 64:475–482.10.1515/hf.2010.058Search in Google Scholar

Xie, Y., Krause, A., Militz, H., Turkulin, H., Richter, K., Mai, C. (2007) Effect of treatments with 1,3-dimethylol-4,5-dihydroxy-ethyleneurea (DMDHEU) on the tensile properties of wood. Holzforschung 61:43–50.10.1515/HF.2007.008Search in Google Scholar

Xu, G.G., Yang, C.Q., Deng, Y. (2004) Combination of bifunctional aldehydes and poly(vinylalcohol) as the crosslinking systems to improve paper wet strength. J. Appl. Polym. Sci. 93:1673–1680.10.1002/app.20593Search in Google Scholar

Yalinkilic, M.K., Gezer, E.D., Takahashi, M., Demirci, Z., Ilhan, R., Imamura, Y. (1999) Boron addition to non- or low-formaldehyde cross-linking reagents to enhance biological resistance and dimensional stability of wood. Holz Roh- Werkst. 57:351–357.10.1007/s001070050358Search in Google Scholar

Yano, H., Yamada, T., Minato, K. (1986) Changes in acoustical properties of Sitka spruce due to reaction with formaldehyde. Mokuzai Gakkaishi 32:984–989.Search in Google Scholar

Yasuda, R., Minato, K. (1994) Chemical modification of wood by non-formaldehyde cross-linking reagents. Part 1. Improvement of dimensional stability and acoustic properties. Wood Sci. Technol. 28:101–110.Search in Google Scholar

Yasuda, R., Minato, K., Norimoto, M. (1994) Chemical modification of wood by non-formaldehyde cross-linking reagents. Part 2. Moisture adsorption and creep properties. Wood Sci. Technol. 28:209–218.10.1007/BF00192689Search in Google Scholar

Yuan, J., Hu, Y., Li, L., Cheng, F. (2013) The mechanical strength change of wood modified with DMDHEU. BioResources 8:1076–1088.10.15376/biores.8.1.1076-1088Search in Google Scholar