Article
Licensed
Unlicensed
Requires Authentication
Meetings
Published/Copyright:
March 29, 2013
Published Online: 2013-03-29
Published in Print: 2013-04-01
©2013 by Walter de Gruyter Berlin Boston
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Masthead
- Masthead
- Publisher’s Note
- Publisher’s Note
- Original Articles
- Effects of water in water/phenol mixtures on liquefaction of Japanese beech as treated under subcritical conditions
- Multistep degradation method for β-O-4 linkage in lignins: γ-TTSA method. Part 2: reaction of lignin model polymer (DHP)
- Antioxidant property of TCF pulp with a high hexenuronic acid (HexA) content
- Determination of absolute molecular weight of sodium lignosulfonates (NaLS) by laser light scattering (LLS)
- Effect of grinding conditions in oscillatory ball milling on the morphology of particles and cellulose crystallinity of Norway spruce (Picea abies)
- Rapid microwave-assisted acid extraction of southern pine waste wood to remove metals from chromated copper arsenate (CCA) treatment
- Moisture in softwoods: fiber saturation point, hydroxyl site content, and the amount of micropores as determined from NMR relaxation time distributions
- Experimental and numerical analysis of the sound insulation property of wood plastic composites (WPCs) filled with precipitated CaCO3
- Applicability of Vis-NIR hyperspectral imaging for monitoring wood moisture content (MC)
- Micromechanical detection of growth stress in wood cell wall by wide-angle X-ray diffraction (WAX)
- The influence of hot-press temperature and cooling rate on thermal and physicomechanical properties of bamboo particle-polylactic acid composites
- Semi-analytical prediction and experimental evaluation of material damping in wood panels
- Composition and antifungal activity of balsam from Liquidambar formosana Hance
- Short Note
- Inverse gas chromatography and XPS of extracted kraft pulps
- Book review
- Nanocellulose: From Nature to High Performance Tailored Material
- Meetings
- Meetings
Articles in the same Issue
- Masthead
- Masthead
- Publisher’s Note
- Publisher’s Note
- Original Articles
- Effects of water in water/phenol mixtures on liquefaction of Japanese beech as treated under subcritical conditions
- Multistep degradation method for β-O-4 linkage in lignins: γ-TTSA method. Part 2: reaction of lignin model polymer (DHP)
- Antioxidant property of TCF pulp with a high hexenuronic acid (HexA) content
- Determination of absolute molecular weight of sodium lignosulfonates (NaLS) by laser light scattering (LLS)
- Effect of grinding conditions in oscillatory ball milling on the morphology of particles and cellulose crystallinity of Norway spruce (Picea abies)
- Rapid microwave-assisted acid extraction of southern pine waste wood to remove metals from chromated copper arsenate (CCA) treatment
- Moisture in softwoods: fiber saturation point, hydroxyl site content, and the amount of micropores as determined from NMR relaxation time distributions
- Experimental and numerical analysis of the sound insulation property of wood plastic composites (WPCs) filled with precipitated CaCO3
- Applicability of Vis-NIR hyperspectral imaging for monitoring wood moisture content (MC)
- Micromechanical detection of growth stress in wood cell wall by wide-angle X-ray diffraction (WAX)
- The influence of hot-press temperature and cooling rate on thermal and physicomechanical properties of bamboo particle-polylactic acid composites
- Semi-analytical prediction and experimental evaluation of material damping in wood panels
- Composition and antifungal activity of balsam from Liquidambar formosana Hance
- Short Note
- Inverse gas chromatography and XPS of extracted kraft pulps
- Book review
- Nanocellulose: From Nature to High Performance Tailored Material
- Meetings
- Meetings