Abstract
A novel printed and compact profile monopole antenna with hybrid reconfigurability structure for switching the resonant frequency and direction of maximum radiations is proposed in this research work. A novel mathematical model for the architecture of Reconfigurable Patch Antenna (RPA), considering input impedance, bandwidth, antenna gain, antenna efficiency and resonant frequency is proposed. For the desired functionality, antenna is incorporated with three switches in such a way that Switch 1 and Switch 2 direct the radiation beam patterns towards different directions while Switch 3 controls the frequency reconfigurability. When Switch 3 is ON, the designed antenna operates at 26.4 GHz covering the 24.2–26.5 GHz band. When Switch 3 is OFF, it operates at 28 GHZ, covering the 27.4–29.8 GHz band. The antenna is proposed to operate at the 5G mobile communication band having a center frequency at 27.6 GHz with a reflection coefficient of −21.5 dB. A 3D design tool HFSS has been used for the simulation purposes.
Author contribution: All the authors have accepted responsibility for the entire content of this submitted manuscript and approved suleasebmission. Muhammad Kamran Shereen provided the idea, performed the experiments and managed the paper. Muhammad Irfan Khattak conceived of the presented idea, verified the analytical methods contributed to the interpretation of the results and took the lead in writing the manuscript. Mua’th Al-Hasan assisted in the idea development and paper writing. All authors discussed the results and contributed to the final manuscript. All authors have read and agreed to the published version of the manuscript.
Research funding: None declared. Non Funded Work.
Conflict of interest statement: The authors declare no conflicts of interest regarding this article.
References
[1] Ericsson Technology Review, “Designing for the future: the 5G NR physical layer,”. Available at: https://www.ericsson.com/en/ericsson-technology-review/archive/2017/designing-for-the-future-the-5g-nr-physical-layer.Search in Google Scholar
[2] Ericsson Technology Review, “Evolving LTE to fit the 5G future,”. Available at: https://www.ericsson.com/en/ericsson-technology-review/archive/2017/evolving-lte-to-fit-the-5g-future.Search in Google Scholar
[3] Ericsson Technology Review, “5G radio access,”. Available at: https://www.ericsson.com/en/ericsson-technology-review/archive/2014/5g-radio-access.Search in Google Scholar
[4] G. H. Hu, J. Feng, S. Zhang, G. Cung, and J. T. Bernhard, “Directional reconfigurable antennas on laptop computers: simulation, measurement and evaluation of candidate integration positions,” IEEE Trans. Antenn. Propag., vol. 52, no. 12, pp. 3220–3227, 2004, 1.10.1109/TAP.2004.836425Search in Google Scholar
[5] T. S. Rappaport, S. Sun, R. Mayzus, et al.., “Millimeter wave mobile communications for 5G cellular: it will work!,” IEEE Access, vol. 1, pp. 335–349, 2013, https://doi.org/10.1109/access.2013.2260813.Search in Google Scholar
[6] J. G. Andrews, S. Buzzi, W. Choi, et al.., “what will 5G be?,” IEEE J. Sel. Area. Commun., vol. 32, no. 6, pp. 1065–1082, 2014, https://doi.org/10.1109/jsac.2014.2328098.Search in Google Scholar
[7] A. Osseiran, F. Boccardi, V. Braun, et al.., “Scenarios for 5G mobile and wireless communications: the vision of the METIS project,” IEEE Commun. Mag., vol. 52, no. 5, pp. 26–35, 2014, https://doi.org/10.1109/mcom.2014.6815890.Search in Google Scholar
[8] G. Augustin, C. Aanandan, P. Mohanan, and K. Vasudevan, “A reconfigurable dual-frequency slot-loaded microstrip antenna controlled by pin diodes”,” Microw. Opt. Technol. Lett., vol. 44, pp. 374–376, 2005.10.1002/mop.20639Search in Google Scholar
[9] C. G. Christodoulou, Y. Tawk, S. A. Lane, and S. R. Erwin, “Reconfigurable antennas for wireless and space applications,” Proc. IEEE, vol. 100, no. 7, pp. 2250–2261, 2012, https://doi.org/10.1109/jproc.2012.2188249.Search in Google Scholar
[10] J. Zhang, A. Wang, and P. Wang, “A survey on reconfigurable antennas,” in Proceedings of the International Conference on Microwave and Millimeter Wave Technology, vol. 3, 2008, pp. 1156–1159.10.1109/ICMMT.2008.4540632Search in Google Scholar
[11] M. F. Ismail, M. K. A. Rahim, and H. A. Majid, “The Investigation of PIN diode switch on reconfigurable antenna,” in 2011 IEEE International RF & Microwave Conference, IEEE, Seremban, Negeri Sembilan, 2011, pp. 234–237.10.1109/RFM.2011.6168737Search in Google Scholar
[12] P. Fang, K. Wang, M. Wolfmüller, and T. F. Eibert, “Radiation pattern reconfigurable antenna for MIMO systems with antenna tuning switches,” in 2018 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting, IEEE, Boston, MA, 2018, pp. 503–504.10.1109/APUSNCURSINRSM.2018.8608356Search in Google Scholar
[13] H. Kimouche and A. Mansoul, “A compact reconfigurable single/dual band antenna for wireless communications,” in Proceedings of the Fifth European Conference Antennas and Propagation, IEEE, Rome, Italy, 2011, pp. 393–396.Search in Google Scholar
[14] H. F. Abutarboush and A. Shamim, “A reconfigurable inkjet-printed antenna on paper substrate for wireless applications,” IEEE Antenn. Wireless Propag. Lett., vol. 17, no. 9, pp. 1648–1651, https://doi.org/10.1109/lawp.2018.2861386.Search in Google Scholar
[15] W. Lin, H. Wong, and R. W. Ziolkowski, “Wideband patternreconfigurable antenna with switchable broadside and conical beams,” IEEE Antenn. Wireless Propag. Lett., vol. 16, pp. 2638–2641, 2017, https://doi.org/10.1109/lawp.2017.2738101.Search in Google Scholar
[16] G. A. Oguntala, A. S. Abdullah, H. J. Mohammed, et al.., “Design of frequency reconfigurable multiband compact antenna using two PIN diodes for WLAN/WiMAX applications,” IET Microw., Antennas Propag., vol. 11, no. 8, pp. 1098–1105, 2017.10.1049/iet-map.2016.0814Search in Google Scholar
[17] M. M. Leingthone and N. Hakem, “Reconfigurable switched-beam antenna using cylindrical Bow Tie FSS window,” in 2018 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting, IEEE, Boston, MA, USA, 2018, pp. 1851–1852.10.1109/APUSNCURSINRSM.2018.8609231Search in Google Scholar
[18] Y. Wu, M. Qu, L. Jiao, Y. Liu, and Z. Ghassemlooy, “Graphene-based Yagi-Uda antenna with reconfigurable radiation patterns,” AIP Adv., vol. 6, no. 6, pp. 119–135, 2016, https://doi.org/10.1063/1.4953916.Search in Google Scholar
[19] P.-Y. Qin, Y. J. Guo, A. R. Weily, and C.-H. Liang, “A pattern reconfigurable U-slot antenna and its applications in MIMO systems,” IEEE Trans. Antenn. Propag., vol. 60, no. 2, pp. 516–528, 2012, https://doi.org/10.1109/tap.2011.2173439.Search in Google Scholar
[20] S. Nikolaou, R. Bairavasubramanian, C. Lugo, et al.., “Pattern and frequency reconfigurable annular slot antenna using pin diodes,” IEEE Trans. Antenn. Propag., vol. 54, no. 2, pp. 439–448, 2006, https://doi.org/10.1109/tap.2005.863398.Search in Google Scholar
[21] M. T. Ali, M. R. Kamarudin, T. A. Rahman, R. Sauleau, and M. N. M. Tan, “Design of reconfigurable multiple elements microstrip rectangular linear array antenna,” Prog. Electromagn. Res. C, vol. 6, pp. 21–35, 2009, https://doi.org/10.2528/pierc08122101.Search in Google Scholar
[22] H. A. Majid, M. K. A. Rahim, M. R. Hamid, and M. F. Ismail, “Frequency and pattern reconfigurable Yagi antenna,” J. Electromagn. Waves Appl., vol. 26, pp. 379–389, 2012, https://doi.org/10.1163/156939312800030893.Search in Google Scholar
[23] T. Aboufoul, A. Alomainy, and C. Parini, “Reconfiguring UWB monopole antenna for cognitive radio applications using GaAs FET switches,” IEEE Antenn. Wireless Propag. Lett., vol. 11, pp. 392–394, 2012, https://doi.org/10.1109/lawp.2012.2193551.Search in Google Scholar
[24] S. Yang, M. Vaseem, and A. Shamim, “Fully inkjet-printed VO 2 -based radio-frequency switches for flexible reconfigurable components,” Adv. Mater. Technol., vol. 0, p. 1800276, 2018, https://doi.org/10.1002/admt.201800276.Search in Google Scholar
[25] T. A. Denidni and Q. Rao, “Hybrid dielectric resonator antennas with radiating slot for dual-frequency operation,” IEEE Antenn. Wireless Propag. Lett., vol. 3, no. 1, pp. 321–323, 2004, https://doi.org/10.1109/lawp.2004.839455.Search in Google Scholar
[26] Q. Rao, T. A. Denidni, A. R. Sebak, and R. H. Johnston, “Compact independent dual-band hybrid resonator antenna with multifunctional beams,” IEEE Antenn. Wireless Propag. Lett., vol. 5, no. 1, pp. 239–242, 2006, https://doi.org/10.1109/lawp.2006.875886.Search in Google Scholar
[27] Y. Gao, B.-L. Ooi, and A. P. Popov, “Dual-band hybrid dielectric resonator antenna with CPW-fed slot,” Microw. Opt. Technol. Lett., vol. 48, no. 1, pp. 170–172, 2006, https://doi.org/10.1002/mop.21296.Search in Google Scholar
[28] X. S. Fang and K. W. Leung, “Designs of single-, dual-, wide-band rectangular dielectric resonator antennas,” IEEE Trans. Antenn. Propag., vol. 59, no. 6, pp. 2409–2414, 2011, https://doi.org/10.1109/tap.2011.2143658.Search in Google Scholar
[29] A. Sharma and R. K. Gangwar, “Compact dual-band ring dielectric resonator antenna with moon-shaped defected ground structure for WiMAX/WLAN applications,” Int. J. RF Microw. Computer-Aided Eng., vol. 26, no. 6, pp. 503–511, 2016, https://doi.org/10.1002/mmce.20996.Search in Google Scholar
[30] M. K. Shereen, M. I. Khattak, and M. Al-Hasan, “A frequency and radiation pattern combo-reconfigurable novel antenna for 5G applications and beyond,” Electronics, vol. 9, p. 1372, 2020, https://doi.org/10.3390/electronics9091372.Search in Google Scholar
[31] M. He, Z. Wang, and M. Leach, “Bio-inspired optimization algorithms applied to rectenna design,” Big Data Anal., vol. 3, p. 1, 2018, https://doi.org/10.1186/s41044-017-0026-4.Search in Google Scholar
[32] A. Iqbal, S. Amor, K. M. Nazij, et al.., “Frequency and pattern reconfigurable antenna for emerging wireless communication systems,” Electronics, vol. 8, no. 4, p. 407, 2019, https://doi.org/10.3390/electronics8040407.Search in Google Scholar
© 2020 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Frontmatter
- Research Articles
- A hybrid reconfigurability structure for a novel 5G monopole antenna for future mobile communication
- 3-D printed CDRA for radiation beam reconfigurability and beamforming in C-band
- Dual circular slot ring triple-band MIMO antenna for 5G applications
- Highly efficient artificial magnetic conductor enabled CPW fed compact antenna for BAN wearable applications
- Electrical equivalent circuit modelling of various fractal inspired UWB Antennas
- Broadband gain enhancement of an UWB antenna using conformal wideband NRI metamaterial
- Non-invasive detection and discrimination of breast tumors at early stage using spiral antenna
- Wear-level-monitoring on electrical conductors with high-frequency alternating currents
Articles in the same Issue
- Frontmatter
- Research Articles
- A hybrid reconfigurability structure for a novel 5G monopole antenna for future mobile communication
- 3-D printed CDRA for radiation beam reconfigurability and beamforming in C-band
- Dual circular slot ring triple-band MIMO antenna for 5G applications
- Highly efficient artificial magnetic conductor enabled CPW fed compact antenna for BAN wearable applications
- Electrical equivalent circuit modelling of various fractal inspired UWB Antennas
- Broadband gain enhancement of an UWB antenna using conformal wideband NRI metamaterial
- Non-invasive detection and discrimination of breast tumors at early stage using spiral antenna
- Wear-level-monitoring on electrical conductors with high-frequency alternating currents