Abstract
This work presents the design and performance of a ×6×3 frequency multiplying chain which covers the frequency range from 207 to 220 GHz. The chain consists of an E-band sextupler, a four-way power-combined amplifier which delivers 300 mW output power and a 220 GHz balanced power-combined frequency tripler. Each way of the tripler circuit includes two anti-series mounted GaAs Schottky diode chips in which each diode has three anodes in series. The chain delivers maximum output power of 23.8 mW at 210 GHz with efficiency of 6.8 % and its output power is higher than 15 mW from 208.8 to 217.2 GHz. The chain has sufficient power to pump a 425 GHz heterodyne receiver and is possible to be used as a transmitting source for 220 GHz security detection systems.
References
[1] E. R. Brown, “THz Generation by Photomixing in Ultrafast Photoconductors,” Int. J. High Speed Electron. Syst., vol. 13, no. 13, pp. 497–545, June 2003.10.1142/S0129156403001818Search in Google Scholar
[2] S. Preu, F. H. Renner, S. Malzer, G. H. Döhler, and L. J. Wang, “Efficient terahertz emission from ballistic transport enhanced superlattice photomixers,” Appl. Phys. Lett., vol. 90, no. 21, pp. 212115 1-5, May 2007.Search in Google Scholar
[3] J. Vukusic, T. Bryllert, Ø. Olsen, J. Hanning, and J. Stake, “Monolithic HBV-based 282-GHz tripler with 31-mW output power,” IEEE Trans. Electron. Device Lett., vol. 33, no. 6, pp. 800–802, June 2012.10.1109/LED.2012.2191385Search in Google Scholar
[4] J. Tuovinen and N. R. Erickson, “Analysis of a 170 GHz frequency doubler with an array of planar diodes,” IEEE Trans. Microwave Theory Tech., vol. 43, no. 4, pp. 962–968, Apr 1995.10.1109/22.375261Search in Google Scholar
[5] A. Maestrini, J. S. Ward, and J. J. Gill, “A 540-640-GHz high-efficiency four-anode frequency tripler,” IEEE Trans. Microwave Theory Tech., vol. 53, no. 9, pp. 2835–2843, Sept 2005.10.1109/TMTT.2005.854174Search in Google Scholar
[6] A. Maestrini, C. T. Canseliet, J. Ward, J. Gill,And, and I. Mehdi, “A 260-340 GHz dual chip frequency tripler for THz frequency multiplier chains,” in Infrared Millimeter Waves and 14th International Conference on Terahertz Electronics, pp. 336, Sept. 2006.10.1109/ICIMW.2006.368544Search in Google Scholar
[7] A. Maestrini, J. S. Ward, C. Tripon-Canseliet, J. J. Gill, C. Lee, H. Javadi, G. Chattopadhyay, and I. Mehdi, “In-phase power-combined frequency triplers at 300 GHz,” IEEE Trans. Microwave Wireless Compon. Lett., vol. 18, no. 3,pp. 218–210, Mar 2008.10.1109/LMWC.2008.916820Search in Google Scholar
[8] J. V. Siles, A. Maestrini, B. Alderman, S. Davies, H. Wang, J. Treuttel, E. Leclerc, T. Närhi, and C. Goldstein, “A single-waveguide in-phase power-combined frequency doubler at 190 GHz,” IEEE Trans. Microwave Wireless Compon. Lett., vol. 21, no. 6, pp. 332–334, June 2011.10.1109/LMWC.2011.2134080Search in Google Scholar
[9] J. V. Siles, B. Thomas, G. Chattopadhyay, A. Maestrini, C. Lee, E. Schlecht, C. Jung, and I. Mehdi, “Design of a high-power 1.6 THz Schottkytripler using ‘on-chip’ power-combining and silicon micromachining,” Proceedings of the 22nd International Symposium on Space Terahertz Technology, pp. 39–42, 2011.Search in Google Scholar
[10] T. Bryllert, A. Malko, J. Vukusic, and J. Stake, “A 175 GHz HBV Frequency Quintupler With 60 mW Output Power,” IEEE Trans. Microwave Wireless Compon. Lett., vol. 22, no. 2, pp. 76–78, Feb 2012.10.1109/LMWC.2011.2181494Search in Google Scholar
[11] J. V. Siles, C. Lee, R. Lin, G. Chattopadhyay, T. Reck, C. Jung-Kubiak, I. Mehdi, and K. B. Cooper, “A High-Power 105–120 GHz Broadband On-Chip Power-Combined Frequency Tripler,” IEEE Trans. Microwave Wireless Compon. Lett., vol. 25, no. 3, pp. 157–159, Mar 2015.10.1109/LMWC.2015.2390539Search in Google Scholar
[12] Z. H. Chen, X. Chen, W. Z. Cui, X. J. Li, and J. X. Ge, “A High-Power G-band Schottky Local Oscillator Chain for Submillimeter Wave Heterodyne Detection,” J. Infrared Millimeter Terahertz Waves, vol. 36, pp. 430–444, May 2015.10.1007/s10762-015-0151-ySearch in Google Scholar
[13] D. W. Porterfield, “High-efficiency terahertz frequency triplers,” IEEE MTT-S Int. Dig., pp. 337–340, June 2007.10.1109/MWSYM.2007.380439Search in Google Scholar
[14] S. Muralidharan, K. Wu, and M. Hella, “A 165–230 GHz SiGe amplifier-doubler chain with 5 dBm peak output power,” 2016 IEEE Radio Frequency Integrated Circuits Symposium (RFIC), San Francisco, CA, 2016, pp. 302–305.10.1109/RFIC.2016.7508311Search in Google Scholar
[15] http://www.vadiodes.com.Search in Google Scholar
[16] http://www.radiometer-physics.de.Search in Google Scholar
[17] C. F. Yao, M. Zhou, Y. S. Luo, G. Lin, C. H. Xu, Y. N. Kou, G. Wu, and J. C. Wang, “Development of D-Band and G-Band Frequency Multiply Sources with Schottky Diodes of NEDI,” J. Infrared Millimeter Waves, vol. 32, no. 3, pp. 256–262, June 2014.Search in Google Scholar
[18] http://www.acst.de/?page=2.5.6.&view=varactor.Search in Google Scholar
© 2017 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Frontmatter
- Tunable Balanced Bandpass Filter with High Common-mode Suppression Based on SLSRs
- Compact Quad-Band Bandpass Filter Using Double-Diplexing Structure
- Seven-Port Unequal Power Divider with Broadband and Large Division Ratio Characteristics Based on T-shape Stub
- A Wilkinson Power Divider with Harmonics Suppression and Size Reduction Using Meandered Compact Microstrip Resonating Cells
- A 210 GHz Power-Combined Frequency Multiplying Source with Output Power of 23.8 mW
- Fractal Based Triple Band High Gain Monopole Antenna
- Wideband Monopole Fractal Heptagonal Antenna Implementation in X-Band Frequency Range
- A Compact SIW-Fed Dielectric Antenna with Equivalently Tapered E-plane Profile
- Dual Band Notched EBG Structure based UWB MIMO/Diversity Antenna with Reduced Wide Band Electromagnetic Coupling
- A Frequency Reconfigurable MIMO Antenna System for Cognitive Radio Applications
- A Practical Millimeter-Wave Holographic Imaging System with Tunable IF Attenuator
- A Two-Stage Space-Time Adaptive Processing Method for MIMO Radar Based on Sparse Reconstruction
- Simple and Low-Cost Dual-Band Printed Microwave Absorber for 2.4- and 5-GHz-Band Applications
- Overview of Sparse Graph for Multiple Access in Future Mobile Networks
- The Lightning Electromagnetic Pulse Coupling Effect Inside the Shielding Enclosure With Penetrating Wire
- The DLR Spaceborne SAR Calibration Center
- Electron Beam Misalignment Study of MIG for 42 GHz, 200 kW Gyrotron
Articles in the same Issue
- Frontmatter
- Tunable Balanced Bandpass Filter with High Common-mode Suppression Based on SLSRs
- Compact Quad-Band Bandpass Filter Using Double-Diplexing Structure
- Seven-Port Unequal Power Divider with Broadband and Large Division Ratio Characteristics Based on T-shape Stub
- A Wilkinson Power Divider with Harmonics Suppression and Size Reduction Using Meandered Compact Microstrip Resonating Cells
- A 210 GHz Power-Combined Frequency Multiplying Source with Output Power of 23.8 mW
- Fractal Based Triple Band High Gain Monopole Antenna
- Wideband Monopole Fractal Heptagonal Antenna Implementation in X-Band Frequency Range
- A Compact SIW-Fed Dielectric Antenna with Equivalently Tapered E-plane Profile
- Dual Band Notched EBG Structure based UWB MIMO/Diversity Antenna with Reduced Wide Band Electromagnetic Coupling
- A Frequency Reconfigurable MIMO Antenna System for Cognitive Radio Applications
- A Practical Millimeter-Wave Holographic Imaging System with Tunable IF Attenuator
- A Two-Stage Space-Time Adaptive Processing Method for MIMO Radar Based on Sparse Reconstruction
- Simple and Low-Cost Dual-Band Printed Microwave Absorber for 2.4- and 5-GHz-Band Applications
- Overview of Sparse Graph for Multiple Access in Future Mobile Networks
- The Lightning Electromagnetic Pulse Coupling Effect Inside the Shielding Enclosure With Penetrating Wire
- The DLR Spaceborne SAR Calibration Center
- Electron Beam Misalignment Study of MIG for 42 GHz, 200 kW Gyrotron